Access

Resource Type

Partner

Collection

Serial/Series Title

Degree Department

Degree Discipline

Degree Level

Country

States

Counties

Decade

Year

Month

Day

Language

80,223 Matching Results

Start Over Day 15th Language English

Results open in a new window/tab.

prev Results: 73 - 96 of 80,223 next

(open access)

Update on the tevatron muon shield

In 1984, the dichromatic train was installed for an initial set of tests. Along with these tests of train performance, measurements of muon rates at various depths in the berm were taken in order to check Monte Carlo predictions. Data were taken at a range of train momentum settings, and from a bare target. The results of those studies are presented here and compared to predictions. In 1985, the quadrupole triplet train was installed for a wide band neutrino run. During this run, 5.5 m of 1.8 m diameter lead was installed at the request of the experimenters to harden the shield. Data obtained during this triplet run under a variety of conditions are also presented, and compared to Monte Carlo predictions. Finally, these results are used to determine how much additional shielding is needed for higher energy operation.

Date: September 15, 1986

Creator: Malensek, A. & Stutte, L.

Object Type: Report

System: The UNT Digital Library

(open access)

Metallic coating of microspheres

Extremely smooth, uniform metal coatings of micrometer thicknesses on microscopic glass spheres (microspheres) are often needed as targets for inertial confinement fusion (ICF) experiments. The first part of this paper reviews those methods used successfully to provide metal coated microspheres for ICF targets, including magnetron sputtering, electro- and electroless plating, and chemical vapor pyrolysis. The second part of this paper discusses some of the critical aspects of magnetron sputter coating of microspheres, including substrate requirements, the sticking of microspheres during coating (preventing a uniform coating), and the difficulties in growing the desired dense, smooth, uniform microstructure on continuously moving spherical substrates.

Date: August 15, 1980

Creator: Meyer, S.F.

Object Type: Article

System: The UNT Digital Library

(open access)

Anaerobic bioprocessing of low-rank coals

The overall goal of this project is to find biological methods to remove carboxylic functionalities from low-rank coals and to assess the properties of the modified coal towards coal liquefaction. The main objectives for this quarter were: (1) continuation of microbial consortia development and maintenance, (2) crude enzyme study using best decarboxylating organisms, (3) decarboxylation of lignite, demineralized Wyodak coal and model polymers, and (4) characterization of biotreated coals.

Date: April 15, 1992

Creator: Jain, M. K.; Narayan, R. & Han, O.

Object Type: Report

System: The UNT Digital Library

(open access)

Reactor Development Program Progress Report, September 1961

BS>Data from examination of blade-type control rods which were used in BORAX are discussed. Operation and maintenance of EBWR is outlined. In work on Borax V, modifications for easier installation of reactor and components is outlined followed by discussion of superheat fuel element development, and fabrication of various reactor components. Borax reactor design is also reported along with information on development and testing. In research on sodiumcooled reactors, activities are summarized in the LPR III and LPR IV programs along with developmental work on EBR I and II. Studies on reactor safety are reported and activities in a program of nuclear technology and general support are outlined. (J.R.D.)

Date: October 15, 1961

Creator: unknown

Object Type: Report

System: The UNT Digital Library

(open access)

DEVELOPMENT OF ULTRASONIC TECHNIQUES FOR THE REMOTE MEASUREMENT OF THE HRT CORE VESSEL WALL THICKNESS

Design and development of a remote ultrasonic inspection technique for use in measuring wall thicknesses in the HRT core vessel are described. (J.R.D.)

Date: March 15, 1962

Creator: McClung, R.W. & Cook, K.V.

Object Type: Report

System: The UNT Digital Library

(open access)

Well test plan for the City of El Centro utility core field experiment

The following are included in the well test plan: well test program schedule and order of work; the injection well drilling program details; the production well drilling program details; and long-term (30-day) production testing program details. (MHR)

Date: June 15, 1981

Creator: unknown

Object Type: Report

System: The UNT Digital Library

(open access)

Possible explosive compounds in the Savannah River Site waste tank farm facilities

Based on a comparison of the known constituents in high-level nuclear waste stored at the Savannah River Site (SRS) and explosive compounds reported in the literature, only two classes of explosive compounds (metal NO{sub x} compounds and organic compounds) were identified as requiring further work to determine if they exist in the waste, and if so, in what quantities. Of the fourteen classes of explosive compounds identified as conceivably being present in tank farm operations, nine classes (metal fulminates, metal azides, halogen compounds, metal-amine complexes, nitrate/oxalate mixtures, metal oxalates, metal oxohalogenates, metal cyanides/cyanates, and peroxides) are not a hazard because these classes of compounds cannot be formed or accumulated in sufficient quantity, or they are not reactive at the conditions which exist in the tank farm facilities. Three of the classes (flammable gases, metal nitrides, and ammonia compounds and derivatives) are known to have the potential to build up to concentrations at which an observable reaction might occur. Controls have been in place for some time to limit the formation or control the concentration of these classes of compounds. A comprehensive list of conceivable explosive compounds is provided in Appendix 3.

Date: March 15, 1992

Creator: Hobbs, D. T.

Object Type: Report

System: The UNT Digital Library

(open access)

Solar production of industrial process steam for the Lone Star Brewery. 80% review report

The solar steam system for the Lone Star Brewery is described in detail. It consists of a roof-mounted parabolic trough collector field heating Monsanto's Therminol T-55 heat transfer fluid, a solar-fired boiler, a heat transfer fluid circulation pump, and all the associated piping. The comparison of various collectors and heat transfer fluids surveyed is reviewed. Also included are discussions of the system performance analysis, economic analysis, safety analysis, data collection, and environmental impact assessment. Numerous drawings illustrate the system, particularly the parallel trough collectors. (LEW)

Date: May 15, 1979

Creator: Deffenbaugh, D. M.; Watkins, P. V.; Hugg, S. B.; Kulesz, J. J.; Decker, H. E. & Powell, R. C.

Object Type: Report

System: The UNT Digital Library

(open access)

Presupernova evolution of massive stars

Population I stars of 15 M/sub mass/ and 25 M/sub mass/ have been evolved from the zero-age main sequence through iron core collapse utilizing a numerical model that incorporates both implicit hydrodynamics and a detailed treatment of nuclear reactions. The stars end their presupernova evolution as red supergiants with photospheric radii of 3.9 x 10/sup 13/ cm and 6.7 x 10/sup 13/ cm, respectively, and density structures similar to those invoked to explain Type II supernova light curves on a strictly hydrodynamic basis. Both stars are found to form substantially neutronized ''iron'' cores of 1.56 M/sub mass/ and 1.61 M/sub mass/, and central electron abundances of 0.427 and 0.439 moles/g, respectively, during hydrostatic silicon burning. Just prior to collapse, the abundances of the elements in the 25 M/sub mass/ star (excluding the neutronized iron core) have ratios strikingly close to their solar system values over the mass range from oxygen to calcium, while the 15 M/sub mass/ star is characterized by large enhancements of Ne, Mg, and Si. It is pointed out on nucleosynthetic grounds that the mass of the neutronized core must represent a lower limit to the mass of the neutron star or black hole remnant that stars …

Date: December 15, 1977

Creator: Weaver, T. A.; Zimmerman, G. B. & Woosley, S. E.

Object Type: Report

System: The UNT Digital Library

(open access)

Mechanisms affecting mass transfer in fuel cells

An initial analysis of particulate effects on molten carbonate fuel cells has been conducted. The analysis has been applied to a conceptual fuel cell with operating parameters appropriate to use with future power generation plants. Particle transport due to several mechanisms has been considered and dominant mechanisms affecting particle delivery to anode channel surfaces and into anode pores have been identified. Thermophoresis and gas flow out from anode pores have been found to inhibit particle arrival on the anode and entry into pores so that neither anode channel blockage nor pore blockage are expected for particles with diameters smaller than about one micron. The analytical approach developed could be applied to other fuel cell types in addition to the molten carbonate fuel cells.

Date: March 15, 1982

Creator: Wenglarz, R.A.

Object Type: Report

System: The UNT Digital Library

(open access)

Augmented Fish Health Monitoring, 1988 Annual Report.

Augmented Fish Health Monitoring Contract AI79-87BP35585 was implemented on July 20, 1987. Second year activities focused on full implementation of disease surveillance activities and histopathological support services to participating state agencies. Persistent and sometimes severe disease losses were caused by infectious hematopoietic necrosis (IHN) in summer steelhead trout in Idaho and in spring chinook salmon at hatcheries on the lower Columbia River. Diagnostic capability was enhanced by the installation, for field use, of enzyme-linked immunosorbent assay (ELISA) technology at the Dworshak Fish Health Center for the detection and assay of bacterial kidney disease and by a dot-blot'' training session for virus identification at the Lower Columbia Fish Health Center. Complete diagnostic and inspection services were provided to 13 Columbia River basin National Fish hatcheries. Case history data was fully documented in a computerized data base for storage and analysis. This report briefly describes work being done to meet contract requirements for fish disease surveillance at Service facilities in the Columbia River basin. It also summarizes the health status of fish reared at those hatcheries and provides a summary of case history data for calendar year 1988. 2 refs., 4 tabs.

Date: August 15, 1989

Creator: Warren, James W.

Object Type: Report

System: The UNT Digital Library

(open access)

National uranium resource evaluation program: hydrogeochemical and stream sediment reconnaissance basic data for Ely quadrangle, Nevada; Utah

Field and laboratory data are presented for 1937 sediment samples from the Ely Quadrangle, Nevada; Utah. The samples were collected by Savannah River Laboratory; laboratory analysis and data reporting were performed by the Uranium Resource Evaluation Project at Oak Ridge, Tennessee.

Date: October 15, 1981

Creator: unknown

Object Type: Report

System: The UNT Digital Library

(open access)

Transport properties of multi-component fluids and of suspensions

This report describes work performed under grant No. DE-FG03-88ER13911 for the period June 15, 1988 through June 14, 1989. During this time, significant progress was made in the derivation of the fundamental equations describing suspensions and multicomponent fluid flow. We first considered a system consisting of spherical heavy (Brownian) particles immersed in a bath of spherical particles. The deviations of the bath from equilibrium are due to the nonequilibrium motions of the Brownian particles. The densities of the bath and of a Brownian particle are similar. An expansion in powers of the mass ratio, yields a Fokker-Planck equation for the distribution function of the Brownian particles, including the effects of direct and hydrodynamic interactions amongst these particles. The effect of the Brownian particle motion on the bath properties has been described. The conditions under which a closed equation for the coordinate space distribution function, can be obtained have been investigated and a Smoluchowski equation for this quantity has been derived.

Date: September 15, 1989

Creator: Oppenheim, I. & McBride, J.

Object Type: Report

System: The UNT Digital Library

(open access)

BNL neutral beam development group. Progress report, FY 1979

The objective of the BNL Neutral Beam Program is to develop a 250 keV neutral beam system suitable for heating experiments in toroidal or mirror plasma devices. The system will be based on acceleration and neutralization of negative hydrogen ions produced in and directly extracted from a source. The objective of source studies is to develop a unit delivering 10 A of negative ion currents in pulses of 1 s duration or longer, operating with extracted current densities of at least 0.5 A/cm/sup 2/ and having acceptable power and gas efficiencies and good beam optics. The 250 keV accelerator development work covers different structures, including those separated from the source by a bending magnet or a beam transfer system. During FY 1979 substantial progress was achieved toward the objectives of the program; in the same period the BNL program was reviewed by a panel, resulting in suggestions for a better orientation toward prospective users' requirements and in establishment of contacts with Princeton Plasma Physics Laboratory (TFTR Project) and Lawrence Berkeley and Livermore Laboratories (MFTF Project). A cooperative effort with Westinghouse was initiated in the second half of FY 1979 in order to utilize industrial facilities and expertise.

Date: January 15, 1980

Creator: Prelec, K. & Sluyters, T.

Object Type: Report

System: The UNT Digital Library

(open access)

Spert I Destructive Test Program Safety Analysis Report

The water-moderated core used for destructive experiments is mounted in the Spent I open-type reactor vessel, which has no provision for pressurization or forced coolant flow. The core is an array of highly enriched aluminum clad, plate-type fuel assemblies, using four bladetype, gang-operated control rods. Reactor transients are initiated at ambient temperature by step-insentions of reactivity, using a control rod which can be quickly ejected from the core. Following an initial series of static measurements to determine the basic- reactor properties of the test core, a series of nondestructive, self-limiting power excursion tests was performed, which covered a reactor period range down to the point where minor fuel plate damage first occurred -approximately for a 10- msec period test. These tests provided power, temperature, and pressure data. Additional kinetic teste in the period region between 10 and 5 msec were completed to explore the region of limited core damage. Fuel plate damage results included plate distortion, cladding cracking, and fuel melting. These exploratory tests were valuable in revealing unexpected changes in the dependence of pressure, temperature, burst energy, and burst shape parameters on reactor period, although the dependence of peak power on reactor period was not significantly changed. An evaluation …

Date: June 15, 1962

Creator: Spano, A. H. & Miller, R. W.

Object Type: Report

System: The UNT Digital Library

(open access)

Secondary Isotope Effects in Molecular Structure

A study was made to determine whether secondary iso tope effects also occur in molecular structure. Electron diffraction studies were carried out on ethane and deuteroethane. In C/sub 2/H/sub 6/ the mean C-C and C-H bond lengths found agreed very closely with values determined for other paraffin hydrocarbons, and the C--H bond showed a normal primary isotope effect (~ 0.005 A) similar to that found in methane when H is replaced by O. The output of the leastsquares analysis suggested that the mean C-- C bond length in C/sub 2/D/sub 6/ is shorter than in C/sub 2/H/sub 6/ and by about 0.004 A. Th e decrease seemed to be real for the apparent uncertainty was not much greater than 0.001 A. (M.C.G.)

Date: June 15, 1962

Creator: Bartell, L. S.

Object Type: Article

System: The UNT Digital Library

(open access)

LIMB Demonstration Project Extension

The basic goal of the Limestone Injection Multistage Burner (LIMB) demonstration is to extend LIMB technology development to a full- scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (a) reductions of 50 percent or greater in SO{sub x} and NO{sub x} emissions can be achieved at a fraction of the cost of add-on FGD systems, (b) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit, and (c) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater.

Date: December 15, 1988

Creator: unknown

Object Type: Report

System: The UNT Digital Library

(open access)

LIMB Demonstration Project Extension

Date: June 15, 1989

Creator: unknown

Object Type: Report

System: The UNT Digital Library

(open access)

DETERMINATIONS OF THE KINETICS AND MECHANISMS OF DEBORONIZATION AT 1135 C

The mechanisms and kinetics of the loss of boron during heating at 1135 deg C under various dynamic environments were determined from powder compacts of 5 wt% elemental boron dispersed in matrices of Fe, Cr, Ni, Si, Fe/sub 2/O/sub 3/, Cr/sub 2/O/sub 3/, NiO, and SiO/sub 2/, compacts of austenitic stainless steel alloy powder containing 0.25 wt% boron, and wrought specimens of 0.13 wt% boron-- stainless steel alloy. The compacts containing 5 wt% boron were heat treated in vacuum, highpurity argon, wet helium, and hydrogen. With the exception of those heat treated in hydrogen, significant boron losses occurred only when a supply of oxygen, either from the sample itself or as a deliberate addition to the heat- treating environment, was available. Correspondingly, the loss mechanism is postulated to be the oxidation of boron to boron sesquioxide and its volatilization from the sample. The loss rate is controlled by the volatilization rate of the oxide which is directly influenced by structure of the compact and sintering environment. Independent of the chemical nature of the matrix, boron losses were incurred during heat treatment in hydrogen. Variations of the water content of the hydrogen from 7 to 460 ppm did not significantly influence …

Date: September 15, 1961

Creator: Cherubini, J.H.

Object Type: Report

System: The UNT Digital Library