Like most large networked sites our users depend heavily on the electronic mail system for both internal and off-site communications. Unfortunately the sendmail.cf file, which is used to control the behavior of the sendmail program, is somewhat cryptic and difficult to decipher for the neophyte. So, on one hand you have a highly visible, frequently used utility, and on the other hand a not-so-easily acquired system administration forte. Here is the sendmail topology of our site, what premises we based it on, and the parts of the sendmail.cf files which support the topology.

A family of nuclear driven engines is described in which nuclear energy released by fissioning of uranium or plutonium in a prompt critical assembly is used to heat a working gas. Engine performance is modeled using a code that calculates hydrodynamics, fission energy production, and neutron transport self-consistently. Results are given demonstrating a large negative temperature coefficient that produces self-shutoff of energy production. Reduced fission product inventory and the self-shutoff provide inherent nuclear safety. It is expected that nuclear engine reactor units could be scaled from 100 MW on up. 7 refs., 3 figs.

Analysis of the proposed GCFR upper and lower plenum flow-through shields has been performed using both discrete ordinate (DOT) and Monte Carlo (MORSE) methods. Several shields having one change of direction in the coolant path (chevron) and two changes of direction (herringbone) were investigated. The shields were modeled as unit cells with periodic boundary conditions. From plenum fluence calculations and design constraints at the reactor vessel liner, it was determined that all the shield configurations analyzed should be adequate for the necessary radiation attenuation.

A shell model approach leads to a simple constituent quark model for hadron structure in which mesons and baryons consist only of constituent quarks. Hadron masses are the sums of the constituent quark effective masses and a hyperfine interaction inversely proportional to the product of these same masses. Hadron masses and magnetic moments are related by the assumption that the same effective mass parameter appears in the additive mass term, the hyperfine interaction, and the quark magnetic moment, both in mesons and baryons. The analysis pinpoints the physical assumptions needed for each relation and gives two new mass relations. Application to weak decays and recent polarized EMC data confirms conclusions previously obtained that the current quark contribution to the spin structure of the proton vanishes, but without need for the questionable assumption of SU(3) symmetry relating hyperon decays and proton structure. SU(3) symmetry breaking is clarified. 24 refs.

A general review of the technical merits of nuclear thermal rocket clustering is presented. A summary of previous analyses performed during the Rover program is presented and used to assess clustering in the context of projected Space Exploration Initiative missions. A number of technical issues are discussed including cluster reliability, engine-out operation, neutronic coupling, shutdown core power generation, shutdown reactivity requirements, reactor kinetics, and radiation shielding. 7 refs., 3 figs., 2 tabs.

The reinterpretation of the BRS equations of Quantum Field Theory as the Maurer Cartan equation of a classical principal fiber bundle leads to a simple gauge invariant classification of the anomalies in Yang Mills theory and gravity.

A conceptual design of a laser fusion power plant is extensively discussed. Recent advances in high gain targets are exploited in the design. A smaller blanket structure is made possible by use of a thick falling region of liquid lithium for a first wall. Major design features of the plant, reactor, and laser systems are described. A parametric analysis of performance and cost vs. design parameters is presented to show feasible design points. A more definitive follow-on conceptual design study is planned. (RME)

The technology for producing an LLNL-developed polymer, L97KVB, has been transferred to a commercial speciality silicones manufacturer, McGhan-NuSil Corporation. Workers there have demonstrated both on a small scale and on a 200 lb. scale that they can produce a polymer which meets our analytical specifications and which will also perform satisfactorily in our load deflection and compression set tests.

Since the entire Mirror Fusion Test Facility (MFTF-B) Magnet System was reconfigured from the original A-cell to an axicell design, much progress has been made on the design, fabrication, and installation planning. The axicell MFTF-B magnet array consists of a total of 26 large superconducting main coils. This paper provides an engineering overview of the progress of these coils. Recent studies on the effects of field errors on the plasma at the recircularizing region (transition coils) show that small field errors will generate large displacements of the field lines. These field errors might enhance radial electron heat transport and deteriorate the plasma confinement. Therefore, 16 superconducting trim coils have been designed to correct the coil misalignments. Progress of the trim coils are reported also.

The shutdown system for the Clinch River Breeder Reactor (CRBR) includes two independent systems--a primary and a secondary system. The Secondary Control Rod System (SCRS) is a new design which is being developed by General Electric to be independent from the primary system in order to improve overall shutdown reliability by eliminating potential common-mode failures. The paper describes the status of the SCRS design and fabrication and testing activities. Design verification testing on the component level is largely complete. These component tests are covered with emphasis on design impact results. A prototype unit has been manufactured and system level tests in sodium have been initiated.

The first results are given for the conceptual design of a short-wavelength gas laser system suitable for use as a driver (high average power ignition source) for a commercial laser fusion power plant. A comparison of projected overall system efficiencies of photolytically excited oxygen, sulfur, selenium and iodine lasers is described, using a unique windowless laser cavity geometry which will allow scaling of single amplifier modules to 125 kJ per aperture for 1 ns pulses. On the basis of highest projected overall efficiency, a selenium laser is chosen for a conceptual power plant fusion laser system. This laser operates on the 489 nm transauroral transition of selenium, excited by photolytic dissociation of COSe by ultraviolet fluorescence radiation. Power balances and relative costs for optics, electrical power conditioning and flow conditioning of both the laser and fluorescer gas streams are discussed for a system with the following characteristics: 8 operating modules, 2 standby modules, 125 kJ per module, 1.4 pulses per second, 1.4 MW total average power. The technical issues of scaling visible and near-infrared photolytic gas laser systems to this size are discussed.

Article discussing intraocular pressure changes and an important determinant of the biocompatibility of intravitreous implants.

MACRO, a code to propagate probability distributions through a set of linked models, is currently under development at Lawrence Livermore Laboratory. An early version of this code, MACRO1, has been used to assess post-sealing dose to man for simple repository and site models based on actual site data.

A series of consistent, versatile, and accurate air-water tests simulating LOCA conditions has been completed on the /sup 1///sub 5/-scale Mark I BWR Pressure Suppression Experimental Facility. Detailed histories of vertical loads on the wetwell are obtained in a carefully scaled three-dimensional system. In particular, variation of hydrodynamic-generated vertical loads with changes in drywell pressurization rate, downcomer submergence, and the vent-line loss coefficient were established. An initial drywell overpressure, which partially preclears the downcomers of water, substantially reduced peak vertical loads.

A reflector for electron cyclotron resonant heating on the Tandem Mirror Experiment Upgrade has been designed to convert the high-power TE/sub 01/ output of the circular waveguide system into a linearly polarized gaussian intensity pattern in the plasma. The reflector is a computer-generated holographic optical element with a twist polarizer. Its design, fabrication, and performance are discussed. Results of the low- and high-power tests are presented. Low-power tests were used to determine the beam pattern and the degree of cross-polarization. High-power tests verified that arcing across the grooves of the twist polarizer does not occur.

Waist welds on spherical experimental pressure vessels have been evaluated under pressure using holographic interferometry. A coincident viewing and illumination optical configuration coupled with a parabolic mirror was used so that the entire weld region could be examined with a single hologram. Positioning the pressure vessel at the focal point of the parabolic mirror provides a relatively undistorted 360 degree view of the waist weld. Double exposure and real time holography were used to obtain displacement information on the weld region. Results are compared with radiographic and ultrasonic inspections.

The effectiveness of water sprays to absorb HF releases has been recently demonstrated by extended laboratory and field tests. In this paper computer simulations are presented of the Hawk, Nevada Test Site, series of field tests, along with parametric studies of several cases which have not been studied in the field. The model used in these simulations, HFSPRAY, treats the gas-phase as an Eulerean fluid whereas the spray is described according to the Lagrangian approach by a finite number of drops of varying size and trajectory. HFSPRAY simulates the momentum, mass and energy interactions between a water spray and a turbulent plume of HF in air; it is capable of predicting the flow velocities, temperature, water vapor and HF concentration fields in two-dimensional large-geometries, for spraying in any direction, (i.e., down-flow, inclined-down-flow, up-flow, and co-current horizontal flow). 15 refs., 21 figs.

CR-39 Polymer, a new solid state track recorder with unprecedented sensitivity to lightly ionizing particles (such as protons) is being developed for eventual neutron dosimetry applications in the Fusion Materials Irradiation Test Facility and elsewhere. The diameters of proton tracks have been found to vary smoothly and reproducibly as a function of energy from 0.20 to 18.0 MeV. Preliminary results on the response of CR-39 polymer to proton tracks as a function of angle show a rapid decrease of the registration efficiency from 100% to 0 for angles of incidence less than 75/sup 0/. Proton recoil track size distributions in CR-39 polymer irradiated with monoenergetic neutrons of varying energy are presented. Some proposed high energy neutron dosimetry and radiography systems using CR-39 polymer are discussed.

Nuclear wastes which are logical candidates for deep geologic disposal include commercial (spent fuel, reprocessing) and defense wastes. It is expected that the 5250 metric tons of spent fuel discharged through the end of 1978 would increase to about 100,000 tons by the end of 2000. The individual characteristics of each waste type (spent fuel, solidified waste, defense wastes) are described in turn. (DLC)

A workshop cosponsored by ICPEMC and the US Department of Energy was held in Alta, Utah, December 9-13, 1984 to examine the extent to which DNA-oriented methods might provide new approaches to the important but intractable problem of measuring mutation rates in control and exposed human populations. The workshop identified and analyzed six DNA methods for detection of human heritable mutation, including several created at the meeting, and concluded that none of the methods combine sufficient feasibility and efficiency to be recommended for general application. 8 refs.

A double-peak, energy-dependent Breit-Wigner model of the E1 gamma-ray strength function was applied to nuclei from As to Rh, to predict their neutron capture cross sections and capture gamma-ray spectra. A consistent set of model parameters was obtained in this mass region to describe the step in the low-energy tail of the E1 strength function. This step allows agreement with photonuclear data at high energies, the correct GAMMA/sub gamma/ to be obtained for agreement with neutron capture cross-section data, and the calculation of the observed hardness in the capture gamma-ray spectra. For nuclei at or near the closed, N = 50 shell, however, the double-peak assumption breaks down. In these cases, good results are still obtained if the same set of model parameters is applied, except that the E1 strength function is formulated in terms of the first, narrower peak. 8 figures.

Recent technical progress in fusion research has been sufficient to encourage the development of conceptual designs for fusion power systems. These design efforts suggest that more attention should be paid to the safety and environmental effects of the radioactivity induced in the structural materials by the fusion neutrons. In particular, radioactivity from neutron activation of the structural components of a fusion power system will be a concern for occupational exposure of personnel. Careful choice of structural materials can significantly reduce this exposure. We propose the Remote Maintenance Rating (RMR) as a numerical means of comparing materials and machine designs with respect to occupational exposures. The RMR is defined as the dose rate at the surface of a uniformly activated, thick, infinite slab with the same composition and density as the machine component. We used the RMR rating system to evaluate the suitability of several different iron-based alloys. The specific fusion power system design used in our evaluation was a conceptual design from the Mirror Advanced Reactor Study (MARS). We determined that HT-9 is significantly better in terms of radiological dose rates at early times than the other iron-based alloys (by a factor of 3 to 7). We also calculated the …

Article on heterodimeric geranyl(geranyl)diphosphate synthase from hop (Humulus lupulus) and the evolution of monoterpene biosynthesis.

This article discusses complexity and synchronization in decision making and information transmission.