This test procedure provides the steps necessary to verify correct functional operation of controls, annunciators, alarms, protective relays and related systems impacted by CENRTC {number_sign}2F3EOA, Microwave Transfer Trip Project, modification work performed under work package 6B-93-00043/M (CENRTC 2F3EOA MWTT OCB A-386 PACKAGE). This procedure separates four tests into separate sections: Energization of A-386 Duplex Panel and Circuits; Local RFL 6750 function tests and start-up; SCADA tests; and A-386 local trip tests.

This document establishes the functions and requirements for the Purex Fuel Transfer Project. The scope of this document includes the 105 KW Basin facilities and utilities necessary to support the Purex Fuel Transport Project, beginning with receipt of the SNF shipment at the K Basins fence line and ending with storage of Mark II canisters in 105 KW Basin. Fuel transportation and packaging requirements are not covered in the scope of this document, but may be referenced in WHC-SC-TP-POC-028, Purex Fuel Shipment Packaging Design Criteria. The 105 KW Basin will function as the receiving repackaging, and storage facility for approximately 0.4 Metric Ton Uranium (MTU) of N Reactor fuel that will be received in four Mark II canisters, and approximately 3.0 MTU of SPR fuel that will be received in four Slug Bucked Overpacks.

The SY-101 Equipment Removal System 100 Ton Hydraulic Trailer was designed and built by KAMP Systems, Inc. Performance of the Acceptance Test Procedure at KAMP`s facility in Ontario, California (termed Phase 1 in this report) was interrupted by discrepancies noted with the main hydraulic cylinder. The main cylinder was removed and sent to REMCO for repair while the trailer was sent to Lampson`s facility in Pasco, Washington. The Acceptance Test Procedure was modified and performance resumed at Lampson (termed Phase 2 in this report) after receipt of the repaired cylinder. At the successful conclusion of Phase 2 testing the trailer was accepted as meeting all the performance criteria specified.

The objective of this Cooperative Research and Development project (CRADA) was to generate a new design for a microwave vacuum window to be used with ASTeX Corporation plasma processing equipment. This vacuum window allows transmission of microwave power from an input waveguide into a vacuum chamber for creation of plasma using the electron cyclotron resonance process. Requirements for the window design are: higher power capability, improved resistance to chemical attack, and physical compatibility with previous window models. In these applications, a significant portion of the input power is deposited in the window by plasma bombardment so the window must remove a great deal of heat to remain at a reliable operating temperature. A power level increase from 1.5 kW to 5 kW is desired by ASTeX for the new window which must have {approximately} 120 mm diameter and be compatible with existing hardware. New applications for these processing systems are being developed by ASTeX; these require the use of highly reactive fluorine plasmas which can rapidly etch some window materials. Therefore, the use of a fluorine compatible window ceramic is required. Two new window designs were investigated using advanced window-modeling techniques and low-power laboratory testing. It was determined that both …

Acceptance Test Procedure for the SHMS-D.

N Reactor spent fuel is being stored in sealed canisters in the KW Basin. Some of the canisters contain damaged fuel elements. There is the potential for release of Cs 137, Kr 85, H3, and other fission products and transuranics (TRUs) when canisters are opened. Canister opening is required to select and transfer fuel elements to the 300 Area for examination as part of the Spent Nuclear Fuel (SNF) Characterization program. This report estimates the amount of radionuclides that can be released from Mark II spent nuclear fuel (SNF) canisters in KW Basin when canisters are opened for SNF fuel sampling as part of the SNF Characterization Program. The report also assesses the dose consequences of the releases and steps that can be taken to reduce the impacts of these releases.

The Safety Equipment List (SEL) supports Analysis Report (FSAR), WHC-SD-CP-SAR-021 and the Plutonium Finishing Plant Operational Safety Requirements (OSRs), WHC-SD-CP-OSR-010. The SEL is a breakdown and classification of all Safety Class 1, 2, and 3 equipment, components, or system at the Plutonium Finishing Plant complex.

The Self Describing Data Sets (SDDS) file protocol is the basis for a powerful and expanding toolkit of over 40 generic programs. These programs are used for simulation postprocessing, graphics, data preparation, program interfacing, and experimental data analysis. This document describes Version 1.4 of the SDDS commandline toolkit. Those wishing to write programs using SDDS should consult the Application Programmer`s Guide for SDDS Version 1.4. The first section of the present document is shared with this reference. This document does not describe SDDS-compliant EPICS applications, of which there are presently 25.

Under this contract the authors have contributed to ITER edged plasma physics by improving the numerics and the organization of the B2.5 edge plasma code, by applying the code in a systematic study of the effect of deliberately introduced impurities upon the divertor heat load, by collaborating with colleagues at IPP Garching in their studies of the ITER divertor using the B2/EIRENE code system and in their model validation studies, and by kinetic studies of the possible beneficial effects of magnetic perturbations upon divertor heat load. In regard to the effect of recycling impurities their modeling indicates that it will be possible to radiate up to 200 MW in the edge plasma and divertor if the edge density is sufficiently high ({approx_equal} 6.0 {times} 10{sup 19}/m{sup 3}) and if there is maintained a concentration of 1.0% neon or 0.5% argon. This implies that an acceptable working point for ITER may just barely be possible with credit for bremsstrahlung and edge radiation alone, and a robust working point appears possible if consideration is given also to core plasma impurity radiation. In regard to the effect of magnetic perturbations they find that a scenario that relies on external windings requires coils no …

This report has identified all plutonium currently excess to DOE Defense Programs under current planning assumptions. A number of material categories win clearly fan within the scope of the MD (Materials Disposition) program, but the fate of the other categories are unknown at the present time. MD planning requires that estimates be made of those materials likely to be considered for disposition actions so that bounding cases for the PEIS (Programmatic Environmental Impact Statement) can be determined and so that processing which may be required can be identified in considering the various alternatives. A systematic analysis of the various alternatives in reachmg the preferred alternative requires an understanding of the possible range of values which may be taken by the various categories of feed materials. One table identifies the current total inventories excess to Defense Program planning needs and represents the bounding total of Pu which may become part of the MD disposition effort for all materials, except site return weapons. The other categories, principally irradiated fuel, rich scrap, and lean scrap, are discussed. Another table summarizes the ranges and expected quantities of Pu which could become the responsibility of the MD program. These values are to be used for …

This Engineering Task Plan (ETP) supports the development for facility use of the next generation in situ sampling system for characterization of tank vapors. In situ sampling refers to placing sample collection devices (primarily sorbent tubes) directly into the tank headspace, then drawing tank gases through the collection devices to obtain samples. The current in situ sampling system is functional but was not designed to provide the accurate flow measurement required by today`s data quality objectives (DQOs) for vapor characterization. The new system will incorporate modern instrumentation to achieve much tighter control. The next generation system will be referred to in this ETP as the New In Situ System (NISS) or New System. The report describes the current sampling system and the modifications that are required for more accuracy.

The calculation decides the integrity of the safety latch that will hold the strong-back to the pump during lifting. The safety latch will be welded to the strong-back and will latch to a 1.5-in. dia cantilever rod welded to the pump baseplate. The static and dynamic analysis shows that the safety latch will hold the strong-back to the pump if the friction clamps fail and the pump become free from the strong-back. Thus, the safety latch will meet the requirements of the Lifting and Rigging Manual for under the hook lifting for static loading; it can withstand shock loads from the strong-back falling 0.25 inch.

This is the second revision to the Management Plan for US DOE contract entitled, ``Demonstration Testing and Evaluation of In Situ Soil Heating,`` Contract Number DE-AC05-93OR22160, IITRI Project Number C06787. The cost plan and schedule have been revised herein. The Management Plan was revised once before, in March 1994. In this project IITRI will demonstrate its in situ soil heating and decontamination technology which uses 60 Hz AC power to heat soil to a temperature of about 900C. This technology is aimed at the decontamination of soil by the removal of organic hazardous constituents by the action of heat and a vacuum gas collection system.

For over a decade, researchers have used small-scale research plots to assist development and selection of high yielding, pest-resistant clones of fast-growing hardwoods such as hybrid poplar (Populus spp.). Substantial advances have been made in the techniques and criteria for screening species and selecting clones. Data from these research plots indicate that the ultimate performance of selected clones is dependent upon variable factors in the environment. Until now, researchers could only determine the suitability of a given site for such clones, not the actual yield potential of the site. Recently in the north central US, several clones were planted on larger-than-research-scale plots on private land recontracted under the Conservation Reserve Program (CRP). The historical database could not provide a framework which would allow producers to predict the yield potential of a particular clone on a specific site. Through a systematic combination of clonal trials on experimental research-scale plots and operational plantings on 50 to 100 acre agricultural-scale field plots, it may be possible to develop yield functions or site quality equations which would predict biomass yields at rotation for selected clones. Such estimates will (1) reduce the probability of planting failure, (2) allow maximum expression of the genetic potential of …

This document serves as the Verification and Validation Report for the TMAD code system, which includes the TMAD code and the LIBMAKR Code. The TMAD code was commissioned to facilitate the interpretation of moisture probe measurements in the Hanford Site waste tanks. In principle, the code is an interpolation routine that acts over a library of benchmark data based on two independent variables, typically anomaly size and moisture content. Two additional variables, anomaly type and detector type, can also be considered independent variables, but no interpolation is done over them. The dependent variable is detector response. The intent is to provide the code with measured detector responses from two or more detectors. The code will then interrogate (and interpolate upon) the benchmark data library and find the anomaly-type/anomaly-size/moisture-content combination that provides the closest match to the measured data. The primary purpose of this document is to provide the results of the system testing and the conclusions based thereon. The results of the testing process are documented in the body of the report. Appendix A gives the test plan, including test procedures, used in conducting the tests. Appendix B lists the input data required to conduct the tests, and Appendices C …

The installation and performance characteristics of a 20 W sodium beacon laser system for the 3 m Shane telescope at the Lick Observatory are presented.

This report reviews and summarizes recent literature on statistical methods for analyzing data sets that are censored by multiple censoring points. This report is organized as follows. Following the introductory comments in Section 2, a brief discussion of detection limits is given in Section 3. Sections 4 and 5 focus on data analysis methods for estimating parameters and testing hypotheses, respectively, when data sets are left censored with multiple censoring points. A list of publications that deal with a variety of other applications for censored data sets is provided in Section 6. Recommendations on future research for developing new or improved tools for statistically analyzing multiple left-censored data sets are provided in Section 7. The list of references is in Section 8.

Froth flotation technique is an effective and efficient process for recovering of ultra-fine (minus 74 {mu}m) clean coal. Economical dewatering of an ultra-fine clean coal product to a 20 percent level moisture will be an important step in successful implementation of the advanced cleaning processes. This project is a step in the Department of Energy`s program to show that ultra-clean coal could be effectively dewatered to 20 percent or lower moisture using either conventional or advanced dewatering techniques. The cost-sharing contract effort is for 36 months beginning September 30, 1994. This report discusses technical progress made during the quarter from July 1 - September 29, 1995.

The purpose of this lecture is to discuss in detail the generalized approach of Kawashima and Gubernatis for the construction of cluster algorithms. We first present a brief refresher on the Monte Carlo method, describe the Swendsen-Wang algorithm, show how this algorithm follows from the Fortuin-Kastelyn transformation, and re=interpret this transformation in a form which is the basis of the generalized approach. We then derive the essential equations of the generalized approach. This derivation is remarkably simple if done from the viewpoint of probability theory, and the essential assumptions will be clearly stated. These assumptions are implicit in all useful cluster algorithms of which we are aware. They lead to a quite different perspective on cluster algorithms than found in the seminal works and in Ising model applications. Next, we illustrate how the generalized approach leads to a cluster algorithm for world-line quantum Monte Carlo simulations of Heisenberg models with S = 1/2. More succinctly, we also discuss the generalization of the Fortuin- Kasetelyn transformation to higher spin models and illustrate the essential steps for a S = 1 Heisenberg model. Finally, we summarize how to go beyond S = 1 to a general spin, XYZ model.

Objective is to determine if conventional slow-growth methods will be successful for growing single quasicrystals in this system. Reaction schemes, isopleths, and a ternary liquidus diagram were constructed using DTA, XRD, microscopy, and energy dispersive spectroscopy. Results suggest a peak in the liquidus near the predicted compositions of Al{sub 65}Cu{sub 23}Ru{sub 12} or Al{sub 65}Cu{sub 20}Ru{sub 15} in the face-centered icosahedral phase field. Further study is needed to verify the existence of a congruently melting phase. There appears to be composition for which slow-growth methods will produce a single-quasicrystal. Directional solidification studies were done on 65Al25Cu10Ru.

Z-pinch implosions driven by the SATURN device at Sandia National Laboratory are modeled with a 2D radiation magnetohydrodynamic (MHD) code, showing strong growth of magneto-Rayleigh Taylor (MRT) instability. Modeling of the linear and nonlinear development of MRT modes predicts growth of bubble-spike structures that increase the time span of stagnation and the resulting x-ray pulse width. Radiation is important in the pinch dynamics keeping the sheath relatively cool during the run-in and releasing most of the stagnation energy. The calculations give x-ray pulse widths and magnitudes in reasonable agreement with experiments, but predict a radiating region that is too dense and radially localized at stagnation. We also consider peaked initial density profiles with constant imploding sheath velocity that should reduce MRT instability and improve performance. 2D krypton simulations show an output x-ray power > 80 TW for the peaked profile.

This supporting document establishes the As Low As Reasonable Achievable (ALARA) Plan to be followed during Sluicing Project W-320 design and construction activities to minimize personnel exposure to radiation and hazardous materials.

The purpose of this guidance document is to introduce Lighting Hazard Management, a unified approach that combines hazard identification and facility categorization (not discussed in this paper) with a new concept -- the Lighting Safety System. We do not intend to develop a brand new lightning code or standard, but rather reference other codes, standards and guides that we determine to be applicable. Using the graded approach to systematic risk management allows for in-depth protection and aids in ensuring personnel safety and optimizing resource protection.

None