The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CO ratio in a slurry reactor.

VISAR (Velocity Interferometer System for Any Reflector) is commonly used for measuring flyer-plate velocities up to 6 km/s. Flyer plates can travel as much as 1 mm, which is large compared to usual depth-of-focus requirements for VISARs. Flyer plates are explosively driven, or driven by some other very energetic means; as such, they must be tested in a chamber, which will contain the explosion. Routing the laser beam to the chamber and the signal beam to the VISAR can be done safely and easily in multi-mode optical fibers. We have optimized a fiber-coupled VISAR system for measuring flyer-plate velocities. This system given constant signal levels over the full travel of the flyer plate. Furthermore, the signal-collection efficiency is maximized, which allows use of a moderately sized laser. We also have optimized the VISAR cavity so it does not limit the system efficiency while giving a velocity sensitivity of about 1 km/s per fringe. 5 refs.

The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr gram iron (NL/hr/gFe) using a synthesis gas with 0.5--1.0 H{sub 2}:Co ratio in a slurry reactor.

The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CO ratio in a slurry reactor.

The objective of this research was to investigate the reaction mechanism of higher alcohol and aldehyde synthesis from syngas and the role of additives in the synthesis. An in situ IR reaction system and probe molecule technique were developed to study adsorbed species, active sites, and reaction pathway during reaction. The catalysts used for this study included silica-supported Rh, Ru, and Ni. (VC)

The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CO ratio in a slurry reactor.

The similarities and differences of a universal network to normal neural networks are outlined. The description and application of a universal network is discussed by showing how a simple linear system is modeled by normal techniques and by universal network techniques. A full implementation of the universal network as universal process modeling software on a dedicated computer system at EBR-II is described and example results are presented. It is concluded that the universal network provides different feature recognition capabilities than a neural network and that the universal network can provide extremely fast, accurate, and fault-tolerant estimation, validation, and replacement of signals in a real system.

The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CP ratio in a slurry reactor.

The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CO ratio in a slurry reactor.

The TPC's (Time Projection Chamber) used in E-810 at the AGS (Alternating Gradient Synchroton) were exposed to silicon ion fluxes equivalent to more than 10{sup 7} minimum ionizing particles per second to measure the distortion of the electric field caused by positive ions in the drift region. Results of these tests are presented and the consequences for the TPC based experiment at RHIC (Relativistic Heavy Ion Collider) are discussed.

A new method of analyzing sensitivity tests is proposed. It uses the Likelihood Ratio Test to compute regions of arbitrary confidence. It can calculate confidence regions for the parameters of the distribution (e.g., the mean, {mu}, and the standard deviation, {sigma}) as well as various percentiles. Unlike presently used methods, such as those based on asymptotic analysis, it can analyze the results of all sensitivity tests, and it does not significantly underestimate the size of the confidence regions. The main disadvantage of this method is that it requires much more computation to calculate the confidence regions. However, these calculations can be easily and quickly performed on most computers.

The meeting began with presentations by the facilitator, Mr. Spiegel, and Dr. Lewis, the program director from DOE. The facilitator introduced those on the podium. He then described the general structure of the meeting and its purpose: to hear the issues and concerns of those present regarding the proposed Hawaiian Geothermal Project. He described his role in ensuring the impartiality and fairness of the meeting. Dr. Lewis further defined the scope of the project, introduced members of the EIS team, briefly described the EIS process, and answered several process questions, noting that cable feasibility would be examined and that Native Hawaiian concerns would be addressed. Ms. Borgstrom stated that the ISIS Implementation Plan will be continuously refined and that impacts of reasonably foreseeable future activities would be examined. During the meeting, more than 90% of the commenters requested that the EIS identify and assess the relative merits and impacts of energy alternatives to the proposed action. Nearly 80% requested that the EIS investigate conservation and renewable forms of energy, such as wind, solar, and biomass. They suggested that integrated resource planning should be used, noting that the State is initiating such a process. More than 30% of the commenters asked …

In December 1990, the US Department of Energy selected 13 projects for funding under the Federal Clean Coal Technology Program (Round III). One of the projects selected was the project sponsored by LIFAC North America, (LIFAC NA), titled LIFAC Sorbent Injection Desulfurization Demonstration Project.'' The host site for this $17 million, three-phase project is Richmond Power and Light's Whitewater Valley Unit No. 2 in Richmond, Indiana. The LIFAC technology uses upper-furnace limestone injection with patented humidification of the flue gas to remove 75--85% of the sulfur dioxide (SO{sub 2}) in the flue gas. In this report, progress for the period July--September 1991 is covered.

Nuclear explosives may be used to capture small asteroids (e.g., 20--50 meters in diameter) into bound orbits around the earth. The captured objects could be used for construction material for manned and unmanned activity in Earth orbit. Asteroids with small approach velocities, which are the ones most likely to have close approaches to the Earth, require the least energy for capture. They are particularly easy to capture if they pass within one Earth radius of the surface of the Earth. They could be intercepted with intercontinental missiles if the latter were retrofit with a more flexible guiding and homing capability. This asteroid capture-defense system could be implemented in a few years at low cost by using decommissioned ICMs. The economic value of even one captured asteroid is many times the initial investment. The asteroid capture system would be an essential part of the learning curve for dealing with larger asteroids that can hit the earth.

This study has provided detailed before-and-after information on the ambient and comfort conditions in nine single family buildings, and on the energy consumption of those buildings, for one or more energy conservation retrofits. The data were recorded in such a manner that as well as being able to determine the savings from the retrofits and the influence these retrofits have on the comfort conditions of the residence, the effects of the retrofits on time-of-day usage are also determinable. The following are included in appendices: a table of participant's names, site addresses and retrofit; significant dates and appropriate comments; a day of data and an annotated data set; pre-retrofit and post-retrofit audit data sheets; and usage history.

None of the materials presently in common use for polarized proton targets has a pure carbon nuclear background. The alcohols and diols contain some oxygen, and the ammonia and amine-based materials contain nitrogen and/or other noncarbon species. In the latter cases the noncarbon nuclei are measurably polarized as a concomitant of the process used to polarize the hydrogen nuclei. The relative simplicity of a pure carbon background would be advantageous for most types of scattering experiments and perhaps crucial for some. In addition to simplifying the kinematics of background events, pure carbon is relatively easy to prepare as a dummy'' target for background subtraction. Also, in such a target material, [sup 13]C-enrichment would yield a clean polarized [sup 13]C material. In this note I explore the possibilities for such materials, touching upon only what I consider to be the high'' points. The subject matter is capable of nearly endless ramification and speculation. In fact, owing to a general lack of relevant experimental data, even this relatively brief note contains much that is speculative to some degree.

The goals for year I of the grant were to extract the Argonne Coals, to swell them, to reswell their residues, to seal the various samples for measurements, to perform analyses of the samples and to measure their NMR decays. Because of an unexpected characteristic of the extraction process, more detailed analyses of the samples are being done than originally anticipated. The mass spectrometric analyses have not been completed. Because routine NMR analyses needed to be done in greater detail than anticipated, the NMR decay measurements have also been delayed. In order to offset these delays, all of the EPR samples, which were to have been examined in year III, have been prepared and a substantial proportion of the pulsed EPR measurements have been made.

In February 1991, Reactor Materials increased the rate of supernate treatment in the M-Area Dilute Effluent Treatment Facility (DETF) from 1800 gallons to [approximately]2700 gallons of supernate per 36,000 gallon dilute wastewater batch. The first release of the treated effluent began on March 3, 1991. A series of whole effluent toxicity tests was conducted on the DETF effluent to determine if the increased supernate concentration would result in any chronic toxicity affects in the receiving stream (Tims Branch). The toxicity tests were conducted at instream concentrations equivalent to DETF release rates of 5, 10, 15, 20, and 25 gallons/min. The test results, based on 7-day Ceriodaphnia dubia chronic toxicity, indicated no toxicity effects at any concentration tested. Supernate treatment in DETF continued at the higher concentration.

The unitarity of the mixing matrix of the charged Higgs bosons, and the orthogonality of the mixing matrix of the neutral Higgs bosons, are used to derive upper bounds on the values of general CP-violating expressions. The bounds are independent of the total number of Higgs fields in any specific model. They allow is to relax the usual assumption of only one Higgs boson being light. It is natural that the CP violation in the exchange of neutral Higgs bosons between bottom quarks be particularly large.

The APS prototype undulator U-5 has been installed at NSLS VUV ring. Its effects on the beam behaviour have been simulated with tracking codes TEAPOT and RACETRACK. The tune shift, the distortion of betatron function, the chromaticity, the transverse coupling, and some of the amplitude-dependent effects on the VUV ring have been compared and are presented in this paper.

Nuclear explosives may be used to capture small asteroids (e.g., 20--50 meters in diameter) into bound orbits around the earth. The captured objects could be used for construction material for manned and unmanned activity in Earth orbit. Asteroids with small approach velocities, which are the ones most likely to have close approaches to the Earth, require the least energy for capture. They are particularly easy to capture if they pass within one Earth radius of the surface of the Earth. They could be intercepted with intercontinental missiles if the latter were retrofit with a more flexible guiding and homing capability. This asteroid capture-defense system could be implemented in a few years at low cost by using decommissioned ICMs. The economic value of even one captured asteroid is many times the initial investment. The asteroid capture system would be an essential part of the learning curve for dealing with larger asteroids that can hit the earth.

During the operation of the Low Level Radioactive Waste Disposal Facility (LLRWDF), large amounts (greater than 100 kg) of enriched uranium (EU) were buried. This EU came primarily from the closing and decontamination of the Naval Fuels Facility in the time period from 1987--1989. Waste Management Operations (WMO) procedures were used to keep the EU boxes separated to prevent possible criticality during normal operation. Closure of the LLRWDF is currently being planned, and waste stabilization by Dynamic Compaction (DC) is proposed. Dynamic compaction will crush the containers in the LLRWDF and result in changes in their geometry. Research of the LLRWDF operations and record keeping practices have shown that the EU contents of trenches are known, but details of the arrangement of the contents cannot be proven. Reviews of the trench contents, combined with analysis of potential critical configurations, revealed that some portions of the LLRWDF can be expected to be free of criticality concerns while other sections have credible probabilities for the assembly of a critical mass, even in the uncompacted configuration. This will have an impact on the closure options and which trenches can be compacted.

The goals for year I of the grant were to extract the Argonne Coals, to swell them, to reswell their residues, to seal the various samples for measurements, to perform analyses of the samples and to measure their NMR decays. Because of an unexpected characteristic of the extraction process, more detailed analyses of the samples are being done than originally anticipated. The mass spectrometric analyses have not been completed. Because routine NMR analyses needed to be done in greater detail than anticipated, the NMR decay measurements have also been delayed. In order to offset these delays, all of the EPR samples, which were to have been examined in year III, have been prepared and a substantial proportion of the pulsed EPR measurements have been made.

The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CO ratio in a slurry reactor.