Presents results of the U. S. Air Forces' accelerated transonic flight tests of the XS-1 No. 1 airplane for the Mach number range from 0.70 to 1.25 at altitudes from 30,000 to 49,000 feet. Data are included on horizontal-tail loads and buffeting, longitudinal trim changes, elevator effectiveness and control forces, and lateral trim characteristics.

Report discussing an investigation of the longitudinal trim and drag characteristics of two airplane configurations through the transonic speed range. One configuration had a thin straight wing and tail and one had a thicker 35 degree sweptback wing and a 46 degree sweptback tail on the same fuselage-fin arrangement. Information about the control effectiveness and stability and application to a full-scale airplane is also provided.

Report presenting an investigation in the 300 mph tunnel to determine the low-speed stability and control characteristics and the jet-engine duct-inlet pressure recovery characteristics of a model of the Edo 142 hydro-ski research airplane. Results regarding the longitudinal stability and control, stall-control devices, alighting gear, lateral stability, directional control, lateral control, and duct pressure recovery are provided.

Report discussing testing in the low-turbulence tunnel to determine the effectiveness of several configurations of vortex generators in increasing maximum lift of a 6-percent-thick symmetrical circular-arc airfoil section. None of the configurations tested were found to greatly increase the lift. Some of the configurations tested included a single row of vortex generators, two rows of generators, larger vortex generators, and sweeping forward the front row of generators.

Report presenting a free-flight investigation of a rocket-powered control research model to determine the force and hinge-moment characteristics of a half-delta tip control on a delta wing. Results regarding the control hinge moments, control normal force, and total normal force are provided.

Report presenting foredrag measurements made at zero angle of attack for a series of fineness ratio 3 nose shapes. The types of noses investigated included theoretically derived minimum drag shapes, hemispherically blunted cones, and other more common profiles. Results regarding hemispherically blunted cones, theoretical minimum drag nose shapes, and comparison of foredrag of all the force models are provided.

Report presenting investigations of the effects of fuel properties on combustion-chamber carbon deposition in singe tubular fuel-atomizing and fuel-prevaporizing combustors. The NACA K factor and the smoking tendency were approximately equally effective in relating carbon-deposition data from the prevaporizing and atomizing combustors. Results regarding the K factor, smoking tendency, effect of prevaporizing combustor operating conditions, sulfur, gum, and olefin, are provided.

Memorandum presenting an investigation of the dynamics of a turbine-propeller engine in the altitude wind tunnel employing the frequency-response technique for a range of pressure altitudes form 10,000 to 30,000 feet. The investigation showed that the dynamic responses generalized for pressure altitude over the range of frequencies investigated. Results regarding steady-state characteristics, the linearity investigation, and dynamic characteristics are provided.

Memorandum presenting an investigation of the low-speed static stability characteristics of a canard model with a 45 degree sweptback wing and a 60 degree triangular horizontal control surface. Results regarding longitudinal stability and control and lateral stability and control are provided.

Report discussing the results of an investigation to determine the stability and control characteristics of a flying model of an unswept-wing vertically rising airplane. Information about stabilization, maneuverability, rolling motions, and landings is provided.

Report presenting an analysis of a series of wing-body combinations in the 8-foot high-speed tunnel. The paper presents the results of an investigation of a wing-fuselage combination with a wing of unswept quarter-chord line, aspect ratio 4, taper ratio 0.6, and an NACA 65A006 airfoil section. Results regarding force and moment characteristics and wake and downwash characteristics are provided.

Report presenting the damping-in-roll stability derivatives of a missile configuration and its components as determined experimentally and theoretically. The experimental damping derivative of the wing-body combination was found to be 67 percent of its theoretical value. Results are given for the wing-body combination, the tail-body combination, and the wing-tail-body combination.

Report discussing an investigation of the effect of sweepback angle on wing-fuselage characteristics at a subsonic and a supersonic Mach number. Lift, drag, and pitching-moment coefficients, downwash-angle, and total-pressure measurements are all provided.

Report presenting testing of wing-body combinations incorporating several wing plan forms of theoretical interest at Mach numbers of 1.62, 1.93, and 2.41 in the supersonic tunnel. One triangular, one arrow, and tow diamond plan forms were tested. Results regarding minimum drag, lift-curve slope, center-of-pressure positions, drag due to lift, and lift-drag ratios are provided.

Report presenting a low-speed investigation in the stability tunnel to determine the effects of symmetrical deflection of half-delta tip controls on the damping in roll and yawing moment due to rolling of a model with triangular wings. Triangular wings have numerous aerodynamic advantages, but it is difficult to obtain adequate longitudinal and lateral control with acceptable control forces when using them. Results regarding the lift characteristics and rolling characteristics are provided.

"Supplementary blade-design data including rotor- and stator-blade coordinates and mean-line angles at the leading and the trailing edges are presented for a transonic axial-flow compressor inlet stage" (p. 1).

Report presenting a low-speed wind-tunnel investigation to determine the longitudinal aerodynamic characteristics of a thin delta wing equipped with various arrangements of double slotted, single slotted, plain, and split flaps. The wing was a flat plate with beveled leading and trailing edges and had a maximum thickness ratio of 0.045, and 60 degrees sweepback of the leading edge.

From Introduction: "As part of a comprehensive investigation of the J40 turbojet engine conducted at the NACA Lewis altitude wind tunnel, the steady-state engine performance of the prototype J40-WE-8 turbojet engine without afterburner was obtained and is presented herein. A basic redesign of the compressor and other modifications in the compressor and the combustor were incorporated in the XJ40-WE-6 turbojet engine (references 2 and 3). In this report the modified engine is designated "the prototype J40-WE-8 without afterburner."

Report presenting an investigation of the planing characteristics of various combinations of a wheel and a hydro-ski. Models tested included at least two values of the following parameters: diameter of wheel, width of wheel, cross-section shape of wheel, fore-and-aft location of wheel, lateral location of wheel, gap between wheel and ski, rotation of wheel, and protrusion of wheel. Results regarding the general effect of a wheel, effect of wheel shape and size, effect of wheel-ski arrangement, and possible methods of reducing resistance are provided.

"A method of measuring instantaneous flow rates of liquid propellants for rocket research is presented. The instrument investigated utilizes the principle of electromagnetic induction. An electromagnetic flowmeter was built, investigated, and satisfactorily placed in service to measure the rate of flow of an oxidant into a rocket" (p. 1).

From Introduction: "Presented in this paper are the results of an investigation of a semispan model of a delta wing with 60^o sweepback at the leading edge which was equipped with a large triangular control having an overhang balance mounted on a skewed hinge axis. The purpose of this investigation was to determine the aerodynamic characteristics of a delta wing with a control which was designed to provide aerodynamic balance at zero control deflection based on the span load distribution of reference 1."

Report presenting a wind-tunnel investigation from a Mach number range of 0.30 to 0.94 to determine the rolling characteristics of a three-winged free-flight type of test vehicle with untapered 45 degree sweptback wings with NACA 65A009 airfoil sections and 0.20-chord ailerons. Results regarding wing-tip helix angles, rolling-moment coefficient, and damping-in-roll coefficients are provided.

Report presenting tests in the 11-inch hypersonic tunnel at Mach number 6.86 to determine the effectiveness of an adjustable supersonic diffuser without boundary-layer control in reducing the pressure ratios across the system required to maintain supersonic flow. Testing indicated that the pressure ratio could be reduced to about one-third the pressure ratio required for starting.

Report presenting results of an investigation of the lateral stability and aileron-effectiveness characteristics of a wing with the leading-edge sweepback decreasing from 45 degrees at the root to 20 degrees at the tip. Results regarding the static lateral stability characteristics and aileron characteristics are provided.