The stability of fluorothene (polytrifluorochloroethylene, Kel-F) to gamma radiation has been investigated to estimate the probable life expectancy of fluorothene equipment exposed to Purex process solutions. Samples of fluorothene were exposed to total gamma radiation dosages up to 10 degree R. The results of these tests substantiate the findings reported by Sisman and Bopp in their compilation of data on the affects of radiation on plastics.

Abstract: Uranium-vanadium ore has long been known in the Trachyte district. Production started in 1913 and has been erratic and intermittent to date. Until recently, practically all production from the Henry Mountains area has come from the Trachyte district.

Report of geological investigations of the Trachyte District of the Henry Mountains in Utah

Fourier refinement analysis of the uranium parameters in uranium tetrafluoride.

The description of the thick-target neutron yields from the D(t,n)He4 and the D(d,n)He3 reactions is calculated as a function of the energy of the bombarding particles. For 60-kev particles the ratio is 108. I increases to 168 at 100 Kev and to 194 for 120-kev particles. A qualitative discussion of the yields from various deuterium target leads to the conclusion that the greatest yield would come from the target which has the lowest stopping cross section per deuterium atom.

Report presenting a correction to an age-diffusion equation used by ANP Physics Group, as well as a test calculation using the corrected equation.

Investigation of the flow through straight-through , elbow, and tee "AN" fittings at negligible approach velocity with approach temperatures up to 1100 degrees F.

A report about anomalous low temperature thermal conductivity of grapnite samples.

Abstract: "This specification covers the cleaning of Zir caloy-2 components of PWR fuel rods and such tools, gauges, or other devices as may be required in subsequent handling, welding and inspection per Fuel Rod Specification AP-292545, Section II-A-4 and Section II-B-3."

From introduction: The study of cyclotron-magnet design presented here is directed toward attaining a large ratio of energy in the ion beam with respect to cost. Alternatively, the goal may be regarded as a smaller, more convenient apparatus. These two objectives are not completely incompatible; a design that is more economical than the usual is also smaller. The best design of a cyclotron can be obtained only by considering the problem as a whole. The conditions necessary to maintain an ion beam, the conditions required for the operation of the oscillator, and a host of other problems influence the design of the magnet. It is assumed in this paper that the "other problems" can be satisfactorily solved, if the gap has a suitable geometry and the field a suitable space dependence.

Discussing recommendations for diamond drilling in the four aces prospect in White Canyon, Utah.

The purpose of the test was to determine the responses of the plant when subjected to load transients exceeding the design magnitudes, and to determine the maximum load changes, positive or negative, that the plant can sustain. The reactor plant responded satisfactorily to all load transients. The only limits exceed were the pressurizer high and low level alarm points. The magnitude of the transients and the time required for the plant to return to equilibrium was dependent upon the size of the the load change. The pressurizer spray was effective in reducing reactor coolant pressure positive surges; however, this resulted in larger negative surges than when the spray valve was closed.

To obtain a better understanding of the mechanism involved in scaling behavior of zirconium, kinetic studies were made of the weight pickup in air after the following pretreatments; (1) exposure to oxygen or nitrogen, (2) exposure to air, oxygen or nitrogen and removal of the resulting surface compounds.

Large savings in waste storage space may be realized by lowering the pH at which TBP waste is stored. Additional savings in neutralizing chemicals and operating time would also increase the monetary gain from such a process change. However, before such a change could be made, the corrosive effect of TBP waste at a lower pH on the mild steel waste storage tanks had to be determined.

Calculations presented were done to determine what maximum temperature gradients and stresses would be in typical designs of flat thorium plates, 100 mils thick and coolled on both sides by NaK.

Discussing the occurrence of uranium deposits in the Pryor-Bighorn Mountains.

The definition of the Lebesgue integral is used to develop a numerical integration method in which the integral is evaluated directly from a contour plot of the function. It is useful in working from weather maps, potential surfaces, etc., but was particularly designed to assist in reducing blast diffraction space-time diagrams to simple, meaningful quantities.

Report discussing methods for recovering hafnium-free zirconium from irradiated fuel elements. Two methods are discussed: the fluoride method and the Zircex method. Experimental procedures to evaluate these methods and their results are presented.

Temperature calculations have been made to aid in planning a production test for low level irradiation of the thin rectangular uranium wafers. These uranium wafers, under irradiation in the outer fringe sone, are expected to have a maximum temperature which is less than 10 C above the local water temperature.

Technical report outlining the effect of strain rate on the tensile properties of thorium. It has been found that the yield strength increases slightly with increasing strain rate, and that tensile strength increases but to a less extent. Studies on the fabrication of thorium by extrusion and drawing have continued, as have studies on the extrusion cladding of thorium and uranium with zirconium. [From Summary}

The object of the work done during the month of June has been to assure that deposition of chemically pure chromium metal by gas plating, both by itself, or as a component of nickel-chronium and/or other alloys.

Five isotopes of bismuth occur in nature. Using particle accelerators providing helium ions up to 40 Mev in energy and deuterons up to 20 Mev in energy, it was possible to produce and identify two artificial radioactive isotopes. With the advent of the 184-inch Berkeley syncho-cyclotron and its hundreds of Mev energies, it was possible to form highly neutron-deficient bismuth isotopes extending more than ten mass units below stable Bi(209).

This memorandum presents the process design for the solvent reast area of the Feed Materials Production Center. The purpose ofthe transmittal is to provide the basis for the detailed mechanical design and layout of this section of the refinery. Drawings, flowsheets, and specifications are included.

"The effects of radiation emission on the motion of electrons in high energy synchrotrons are analyzed. The damping rates and quantum excitation of the three principal modes of oscillation are derived for strong focusing and constant gradient accelerators. Methods for correcting the radiation effects for strong focusing accelerators are discussed."