Streaming multimedia content with UDP has become popular over distributed systems such as an Internet. This may encounter many losses due to dropped packets or late arrivals at destination since UDP can only provide best effort delivery. Even UDP doesn't have any self-recovery mechanism from congestion collapse or bursty loss to inform sender of the data to adjust future transmission rate of data like in TCP. So there is a need to incorporate various control schemes like forward error control, interleaving, and congestion control and error concealment into real-time transmission to prevent from effect of losses. Loss can be repaired by retransmission if roundtrip delay is allowed, otherwise error concealment techniques will be used based on the type and amount of loss. This paper implements the interleaving technique with packet spacing of varying interleaver block size for protecting real-time data from loss and its effect during transformation across the Internet. The packets are interleaved and maintain some time gap between two consecutive packets before being transmitted into the Internet. Thus loss of packets can be reduced from congestion and preventing loss of consecutive packets of information when a burst of several packets are lost. Several experiments have been conducted with …

As the use of virtual environments (VEs) is becoming more widespread, user needs are becoming a more significant part in those environments. In order to adapt to the needs of the user, a system should be able to infer user interests and goals. I developed an architecture for user modeling to understand users' interests in a VE by monitoring their actions. In this paper, I discussed the architecture and the virtual environment that was created to test it. This architecture employs sensors to keep track of all the users' actions, data structures that can store a record of significant events that have occurred in the environment, and a rule base. The rule base continually monitors the data collected from the sensors, world state, and event history in order to update the user goal inferences. These inferences can then be used to modify the flow of events within a VE.

Due to the growing need of the Internet and networking technologies, simple, powerful, easily maintained distributed applications needed to be developed. These kinds of applications can benefit greatly from distributed computing concepts. Despite its powerful mechanisms, Jini has yet to be accepted in mainstream Java development. Until that happens, we need to find better Remote Method Invocation (RMI) solutions. Feasibility of implementation of Multicasting in RMI is worked in this paper. Multicasting capability can be used in RMI using Jini-like technique. Support of Multicast over Unicast reference layer is also studied. A piece of code explaining how it can be done, is added.

This research is the result of an effort to provide real-time machine recognition of hand-send Morse code through the use of the M6800 microcomputer. While the capability to recognize hand-send Morse code messages by machine has been demonstrated before on large scale special purpose computers, on minicomputers, and even on the M6800 microcomputer, the main contribution of this paper is to demonstrate it with relatively understandable hardware and software.

There is a natural tendency for biological systems to change as their environments change. The fittest in the biological systems survive, adapt to their environment, and multiply while the weakest in the environment diminish. There have been attempts in computer science to model the processes of natural selection and survival which occur in biological systems in order to obtain more efficient and effective machine-learning algorithms. Genetic algorithms are the result of these attempts.

Time-sharing computer systems permit large numbers of users to operate on common sets of data and programs. Since certain parts of these computer resources may be sensitive or proprietary, there exists the risks that information belonging to one user, may, contrary to his intent, become available to other users, and there is the additional risk that outside agencies may infiltrate the system and obtain information. The question naturally arises of protecting one user's stored program and data against unauthorized access by others.

Every business has to keep records. Sometimes these records have to be presented in a standardized form, or more often they can be arranged in any way that suits the user. Business records are of little use unless they can be referred to quickly, to provide information when it is required. In computer systems it is essential to be able to recognize any particular record in a data file which is a collection of similar records kept on secondary computer storage devices.

The purpose of this project is 1) to create a Thai character set for text processing, 2) to write a text processing program for the character set, and 3) to allow users to create and save the text.

The main purpose of this project is to compare a new sorting method- Meansort with its preceding sorting method- Quicksort. Meansort uses the mean value for each key to determine the partition of the file, but Quicksort selects at random. Experiments proved that in some ways Meansort is superior to Quicksort but is still not perfect since it always needs a mean value for each key. This project implements these two methods and determines the situations under which each of these methods outperforms the other.

The purpose of this project is to explore the alternate data structures for a disk file which is currently a preorder binary tree. specifically, the file is the key directory for an implementation of Keyed Sequential Access Method (KSAM) in a mini-computer operating system. A new data structure will be chosen, with the reasons for that choice given, and it will be incorporated into the existing system.

The Ada language is one of the most controversial topics in computer science today. Ada was originally designed as a solution to the software maintenance problems encountered by the United States Department of Defense[2], and as a multi-purpose language to be used particularly in an embedded computer system[7]. Never before has a project been undertaken. The Ada language does not simply entail the construction of a new compiler or a new language definition, it is this and a great deal more.

An interactive text editor is a computer program that allows a user to create and revise a target document such as program statements, manuscript text, and numeric data through an online terminal and the computer. It allows text to be modified and corrected many orders of magnitude faster and more easily than would manual correction. The most important characteristic of the text editor is its convenience for the user. Such convenience requires a simple, mnemonic command language which is easy to use and understand.

This paper is written to present the design purpose and design process of the Multiple Window Editor. Multiple Window Editor is a software which allows the user to edit or view different files or the same file on the screen by the window facilities provided by this software. All the windows can be dynamically created, changed, moved, and destroyed. The main purpose of this program is to improve the programming environment for the users. The design motivations will be introduced through the comparison of the present existing window facilities and the editor components. The design process will be introduced by analyzing the design decision, design tradeoffs and implementation problems.

This is a brief survey of some of the popular computer systems. As many features as possible have been covered in order to get an overview of the systems under consideration.

The objective of this work is to help the faculty, staffs and students of NTSU to use the CalComp plotting facility very easily. Therefore, this work is written in such a step by step and self-explanatory way to help the reader to understand and grasp the essential technique of the computer plotting. Each subroutine illustrated in this work has been run and checked by our NTSU computer-CalComp plotting facility; the results of sample programs and illustrated graphs are believed to be very useful to understand each individual subroutine. Basically, software packages are stored in the magnetic disk of the IBM 360 computer as the standard graphic subroutines. These subroutines were written in FORTRAN IV. The user can write the driving program to call these subroutines and also inputs the desire data to the computer for computation. The results of computation will be outputed and stored in the magnetic tape.

PILOT (Programmed Inquiry, Learning or Teaching) is a simple, conversational language developed in 1969 by John A. Starkweather at the University of California Medical Center in San Francisco. Originally designed for computer assisted instructional needs, PILOT also has been effectively used as an introductory computer language. The PILOT system developed for the Apple II microcomputer consists of two programs, PILOT EDITOR and PILOT DRIVER, which are written in Applesoft and which use the Apple II disk operating system. The PILOT system was designed to facilitate easy authoring and execution of programs written in an extended version of the PILOT language. Due to the memory requirements of the programs and the Apple II disk operating system, the PILOT system described here should be executed on a machine with at least 32k bytes of random access memory.

Among the early applications of computers, one can find frequent mention of intelligent instructional systems. Such intelligent instructional systems represent a new generation of learner-based computer aided instruction, preceded in time by the original frame-based systems and an intervening generation of expert-based CAI. The history of CAI is characterized by three generations: Frame-based CAI, Expert-based CAI and Learner-based CAI.

It is frequently considered to be apparent two stages during assembly time. The first is the preprocessor stage in which a single instruction called the micro instruction is replaced with the sequence of instructions called the macro definition. The second is the processor stage in which the output from the first stage is assembled into machine language instructions for a particular computer. This paper descibes the first one which is macro-preprocessor stage.

Content-based image retrieval (CBIR) is the retrieval of images from a collection by means of internal feature measures of the information content of the images. In CBIR systems, text media is usually used only to retrieve exemplar images for further searching by image feature content. This research work describes a new method for integrating multimedia text and image content features to increase the retrieval performance of the system. I am exploring the content-based features of an image extracted from a video to build a storyboard for search retrieval of images. Metadata encoded multimedia features include extracting primitive features like color, shape and text from an image. Histograms are built for all the features extracted and stored in a database. Images are searched based on comparing these histogram values of the extracted image with the stored values. These histogram values are used for extraction of keyframes from a collection of images parsed from a video file. Individual shots of images are extracted from a video clip and run through processes that extract the features and build the histogram values. A keyframe extraction algorithm is run to get the keyframes from the collection of images to build a storyboard of images. In …

The FrameNet database is being used in a variety of NLP research and applications such as word sense disambiguation, machine translation, information extraction and question answering. The database is currently available in XML format. The XML database though a wholesome way of distributing data in its entireness, is not practical for use unless converted to a more application friendly database. In light of this we have successfully converted the XML database to a relational MySQL™ database. This conversion reduced the amount of data storage amount to less than half. Most importantly the new database enables us to perform fast complex querying and facilitates use by applications and research. We show the steps taken to ensure relational integrity of the data during the refactoring process and a simple demo application demonstrating ease of use.

The motivation behind this research has been the idea of the capability of the computing device to dynamically reconfigure itself. The goal of this work is to measure the computational power of reconfigurable machines rather in an abstract manner by proposing a model the FPGAs abstract computing machines. Modeling FPGAs in terms of Automata Theory would give a base to answer more fundamental questions about the capabilities and possible answers. If a Finite State Machine (FSM) or a Turing Machine (TM) has the capability of reconfiguring its finite control, does this ability give the abstract computing device new computational power. In other words is a reconfigurable FSM, TM or a Cellular Automata more powerful than their corresponding non-configurable versions?

Agent-based architecture explains the rationale and basis for developing agents that can interact with users through natural language query/answer patterns developed systematically using AIML (artificial intelligence mark-up language) scripts. This thesis research document also explains the architecture for VISTA (virtual interactive story-telling agents), which is used for interactive querying in educational and recreational purposes. Agents are very effective as conversational interfaces when used along side with graphical user interface (GUI) in applications and Web pages. This architecture platform can support multiple agents with or with out sharing of knowledgebase. They are very useful as chat robots for recreational purposes, customer service and educational purposes. This platform is powered by Java servlet implementation of Program D and contained in Apache Tomcat server. The AIML scripting language defined here in is a generic form of XML language and forms the knowledgebase of the bot. Animation is provided with Microsoft® Agent technology and text-to-speech support engine.

Due to the rapid growth of wireless networking, the fallible security issues of the 802.11 standard have come under close scrutiny. Nowadays most of the organizations are eager to setup wireless local area networks to reduce the hassles of limited mobility provided by conventional wired network. There are serious security issues that need to be sorted out before everyone is willing to transmit valuable corporate information on a wireless network. This report documents the inherent flaws in wired equivalent privacy protocol used by the 802.11 standard and the ensuing security breaches that can occur to a wireless network due to these flaws. The solutions suggested in this report might not actually make the 802.11 standard secure, but will surely help in the lead up to a secure wireless network standard.

This software is aimed at providing user-friendly, easy-to-use environment for the user to scrub (de-identify/modify) the DICOM header information. Some tools either anonymize or default the values without the user interaction. The user doesn't have the flexibility to edit the header information. One cannot scrub set of images simultaneously (batch scrubbing). This motivated to develop a tool/utility that can scrub a set of images in a single step more efficiently. This document also addresses security issues of the patient confidentiality to achieve protection of patient identifying information and some technical requirements