An investigation of luminescent sensing has been presented. Neutral Red, a common pH luminescent sensor, was shown to be an effective carbon dioxide sensor for the first time. Sensing experiments were performed both through fluorometric and fluorescent microscopy studies, giving rise to the possibility of carbon dioxide sensing for biological applications. Neutral Red was benchmarked against the well-established carbon dioxide sensor Pyranine (8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt), HPTS. Neutral Red was shown to have improved response times and higher consistency within the sensing drift compared to HPTS. Trinuclear Au(I) complexes have previously shown to sense metal ions through changes in their luminescent properties. A computational study on d10-d10 interactions, which exist in complexes where Cu+, Ag+, and Au+ are intercalated with [Au(μ-C2,N3-ethylImidazolate)]3 in the form of both half and full sandwich adducts. Binding energies, total density plots, and Morse and Dunham analyses of potential energy surfaces are employed to better understand the metal-metal interactions and the effects of electron correlation, basis set superposition error, and dispersion of metallophilic interactions of the adduct complexes. As metal-metal interactions within these types of complexes become better understood, the tuning of trinuclear Au(I) complexes for luminescent sensing of metals becomes increasingly possible.

Semiconducting aromatic-boron carbide composite/alloyed films formed by plasma enhanced chemical vapor deposition from carborane and aromatic precursors have been demonstrated to be excellent detectors for thermal neutrons because of the large 10B cross section. The electronic properties of these films derived from XPS show that the properties of boron carbide can be tuned by co-deposition of aromatic compounds and carborane. Aromatic doping results in narrower indirect band gaps (1.1 - 1.7 eV vs ~3 eV for orthocarborane-derived boron carbide without aromatics) and average charge transport lifetimes (as long as 2.5 ms for benzene-orthocarborane and 1.5 - 2.5 ms for indole-orthocarborane) that are superior to those of boron carbide (35 µs). The films also show enhanced electron-hole separation that is also superior to those of boron carbide where the states at the top of the valence band is made of aromatic components while states at the bottom of the conduction band is a combination of aromatic and carborane moeities. These properties result in greatly enhanced (~850%) charge collection, relative to films without aromatic content, in thermal neutron exposures at zero-bias, and are gamma-blind. Such films are therefore excellent candidates for zero-bias neutron detector applications. These properties also show little variation with …

Energy- and electron-transfer processes in molecular and supramolecular donor-acceptor systems are of current interest in order to develop light-energy harvesting systems through designing covalently linked donor-acceptor systems or utilizing self-assembled donor-acceptor systems. The research presented in this dissertation deals with the electrochemical, anion binding, and photochemical studies of various oxoporphyrinogen (OxPs), porphyrin, corrole, and phenothiazine systems. The first chapter provides a brief introduction to the material discussed in the subsequent chapters. The second chapter discusses the bromination of meso-tetraarylporphyrings and how that affects their electrochemical, catalytic, and other properties. Bromination of these porphyrins and oxoporphyrinogens allow the HOMO-LUMO gap to increase revealing blue-shifted absorption. Brominated OxPs and bis-crown ether OxP self-assembled with anions depending on strength of the anion and size of the binding site. The addition of crown ethers allows a cation binding site which makes a self-assembled donor-acceptor supramolecular system.Chapters 5 and 6 discuss a series of donor-acceptor conjugates based on zinc porphyrin as the electron donor and copper(III) corrole as the electron acceptor. These studies illustrate the importance of copper(III) corrole as a potent electron acceptor for the construction of energy harvesting model compounds, and constitute the first definitive proof of charge separation in ZnP-CuIIIC systems.Chapter 7 …

Porphyrins with extended π-electronic networks are promising candidates for a wide range of applications from medicine to nanotechnology owing to their unique optical and electronic properties. This dissertation is focused on synthesis, characterization and application of β-functionalized π-extended porphyrins. This dissertation is comprised of seven chapters. Chapter 1 focuses on the importance and objective of this work. Chapter 2 gives brief introduction to porphyrins and π-extended porphyrins. In chapter 3, a class of β-functionalized linear push-pull zinc dibenzoporphyrins YH1-YH3 were designed, synthesized, and utilized as light harvesters for DSSCs. In chapter 4, in order to further enhance the photovoltaic performance of β-functionalized benzoporphyrin dyes based DSSCs, a new class of push-pull dibenzoporphyrins YH4-YH7 bearing the phenylethynyl bridge was designed, synthesized and utilized as light harvesters for DSSCs. In chapter 5, in order to solve the photodegradation problem associated with YH7, a new series of push-pull dibenzoporphyrins YH8-YH10 bearing different diarylamino push groups was designed and synthesized. This class of push-pull porphyrins shows improved photostability and enhanced DSSC performance. In chapter 6, a new pentacene-fused diporphyrin with high stability and solubility was prepared and characterized. Chapter 7 includes the summary of this dissertation and describes possible future work.

The reaction of [BrRe(CO)₄]₂ with 2-(diphenylphosphino)pyridine (PN) and 6-(diphenylphosphino)-2-formylpyridine (PON) was investigated. The reactions were regiospecific and exclusively produced the phosphorus-coordinated products, BrRe(CO)₄(κᵖ-PN) and BrRe(CO)₄(κᴾ-PON). The kinetics for the chelate ring closure (κᴾ→ κᴾᴺ) in BrRe(CO)₄(κᴾ-PN) were confirmed to occur by dissociative CO loss. The reaction of [BrRe(CO)₄]₂ with 2-(diphenylphosphino)pyridine (PN) was modeled computationally by DFT calculations. The preferred reaction pathway for the substitution reaction was determined to occur by direct attack of the pnictogen donor on the dimer and formation of the κᴺ isomer as the kinetic substitution product occurs. The κᴺ kinetic product then rapidly isomerizes to the κᴾ thermodynamic product by way of a reversible ligand dissociation. Treatment of the tetrahedral cluster H₂Ru₃(CO)₃(μ₃-S) (1) with 2-(diphenylphosphino)thioanisole (PS) furnishes the cluster H₂Ru₃(CO)₇(κ²-PS)(μ₃-S) (2). Cluster 2, which exhibits a chelated thiophosphine ligand (κ²-PS), exists as a pair of diastereomers with Keq = 1.55 at 298 K that differ in their disposition of ligands at the Ru(CO)(κ²-PS) center. The PS ligand occupies the equatorial sites (Peq, Seq) in the kinetic isomer and axial and equatorial sites (Pax, Seq) in the thermodynamically favored species. The reversible first-order kinetics to equilibrium have been measured experimentally by NMR spectroscopy and HPLC over the …

Computational chemistry has gained interest as a characterization tool to predict photoluminescence, reactivity and structural properties of organic and transition metal complexes. With the rise of methods including relativity, these studies have been expanded to the accurate modeling of luminescence spectra of complexes with considerable spin-orbit splitting due to heavy metal centers as well as the reaction pathways for these complexes to produce natural products such as hydrogen gas. These advances have led to the synthesis and utility of more effective catalysis as well as the development of more effective organic light emitting diodes (OLEDs) through the incorporation of organometallic complexes as emitters instead of typical organic emitters. In terms of significant scientific advancement presented in this work is in relation to the discovery of significant spin-orbit splitting in a gold(I) alkylphosphine complex, where the splitting results in the states that emit in different colors of the visible region of the electromagnetic spectrum. This work also reveals the discovery both computationally and experimentally, of a genuine polar-covalent bond between two-closed shell metals. This work highlights a complex with an incredibly short gold(I) – copper(I) intermetallic distance leading to a vibrational frequency and dissociation energy that is on par with those …

Styrene production by a (FlDAB)PdII(TFA)(η2-C2H4) complex was modeled using density functional theory (DFT). Benzene C-H activation by this complex was studied via five mechanisms: oxidative addition/reductive elimination, sigma-bond metathesis, concerted metalation deprotonation (CMD), CMD activation of ethylene, and benzene substitution of ethylene followed by CMD of the ligated benzene. Calculations provided evidence that conversion of benzene and ethylene to styrene was initiated by the fifth pathway, arylation via CMD of coordinated benzene, followed by ethylene insertion into the Ru-Ph bond, and then β-hydrogen elimination. Also, monomer (active species)/dimer equilibrium concentrations were analyzed. The results obtained from present study were compared with that of a recently reported RhI complex to help identify more suitable catalysts for the direct production of styrene from ethylene and benzene. Second, theoretical studies of heterobimetallic {Ag–Fe(CO)5}+ fragments were performed in conjunction with experiments. The computational models suggested that for this first example of a heterodinuclear, metal-only FeAg Lewis pair (MOLP) that Fe(CO)5 acts as a Lewis base and AgI as a Lewis acid. The ῡCO bands of the studied molecules showed a blue shift relative to those measured for free Fe(CO)5, which indicated a reduction in Fe→CO backbonding upon coordination to silver(I). Electrostatic interaction is predicted …

Six peripherally meso-modified Zn (II) porphyrin sensitizer dyes are designed and their J-V performance in dye sensitized solar cell (DSSC) evaluated. Electron-donating groups including phenothiazine, carbazole and pyrene are used to modify the porphyrin macrocycle at the meso-carbon position(s). To compare the effect of donor substitution on the performance of the cells in terms of short circuit current (Jsc), light harvesting efficiency (LHE) and power conversion efficiency (η), two sets of sensitizers with different degrees of substitution are synthesized. One set of dyes (mono-substituted) have one electron donor at trans-position to the acceptor, while the second set (tri-substituted) dyes have three of the same type electron donor groups at 5, 10 and 15 meso-carbon positions making all the six dyes push-pull type sensitizers incorporating 4'-carboxyphenyl as an electron-acceptor/anchor group. Different spectroscopic and electrochemical methods are used to study the photophysical and electrochemical properties of the dyes, while the photovoltaic performance of their cells under 1.5 A.M is studied using solar simulator. Meso-substitution of Zinc (II) porphyrin with these small donor molecules is shown to improve the light harvesting character of the Zinc (II) porphyrin macrocycle in the UV-Vis absorption while at same time improving its fluorescence quantum yield, excited-state life …

In the development of covalent organic frameworks (COFs), often the scaffold linkers are assumed to be electro- and photoinactive, and this was also to be the case for 2,3,6,7,10,11-hexahydroxytriphenylene, a tritopic linker. However, as demonstrated in the present study, the reaction product of this linker, hexaoxatriphenylene, is electron rich and when connected to a suitable photosensitizer engages itself in an efficient excited-state charge separation process. In the present study, we have employed BF2-chelated dipyrromethenes (BODIPYs) as sensitizers, which are connected to hexaoxatriphenylene through the center boron, rendering paddle-wheel-type structures. Systematic photophysical, electrochemical, computational, and photochemical studies involving pump-probe femtosecond transient spectroscopy have been performed to establish efficient charge separation in these novel supramolecular structures.