A letter report issued by the Government Accountability Office with an abstract that begins "The Federal Motor Carrier Safety Administration (FMCSA) is responsible for improving commercial vehicle safety and uses education and outreach as part of its efforts. The House report accompanying the fiscal year 2005 Department of Transportation (DOT) appropriations bill asked GAO to report on FMCSA's education and outreach programs to the House and Senate Committees on Appropriations. GAO (1) describes FMCSA's education and outreach programs and how they relate to FMCSA's goals (2) identifies the extent to which FMCSA has evaluated its education and outreach programs and (3) describes the extent to which FMCSA's education and outreach programs are effective."

A letter report issued by the Government Accountability Office with an abstract that begins "The livestock industry, which contributes over $100 billion annually to the national economy, is vulnerable to foreign animal diseases that, if introduced in the United States, could cause severe economic losses. To protect against such losses, critical research and diagnostic activities are conducted at the Plum Island Animal Disease Center in New York. The Department of Agriculture (USDA) was responsible for Plum Island until June 2003, when provisions of the Homeland Security Act of 2002 transferred the facility to the Department of Homeland Security (DHS). Under an interagency agreement, USDA continues to work on foreign animal diseases at the island. GAO examined (1) DHS and USDA coordination of research and diagnostic activities, (2) changes in research and diagnostic priorities since the transfer, and (3) long-term objectives of joint activities at Plum Island."

A letter report issued by the Government Accountability Office with an abstract that begins "Collectively, the Department of Defense (DOD) gives its contractors the opportunity to earn billions of dollars through monetary incentives--known as award fees and incentive fees. These fees are intended to motivate excellent contractor performance in areas deemed critical to an acquisition program's success, with award fees being appropriate when contracting and program officials cannot devise objective incentive fee targets related to cost, technical performance, or schedule. GAO was asked to determine whether award and incentive fees have been used effectively as a tool for achieving DOD's desired acquisition outcomes. To do this, GAO selected a probability sample of 93 contracts from the study population of 597 DOD award- and incentive-fee contracts that were active and had at least one contract action valued at $10 million or more from fiscal year 1999 through 2003."

Correspondence issued by the Government Accountability Office with an abstract that begins "Authoritative bodies have promulgated laws, accounting standards, information system requirements, and related guidance to emphasize the need for cost information and cost management in the federal government. For example, the Chief Financial Officers (CFO) Act of 1990, contains several provisions related to managerial cost accounting, one of which states that an agency's CFO should develop and maintain an integrated accounting and financial management system that provides for the development and reporting of cost information. Statement of Federal Accounting Standards No. 4, Managerial Cost Accounting Concepts and Standards for the Federal Government, and the Joint Financial Management Improvement Program's (JFMIP) Framework for Federal Financial Management Systems established accounting standards and system requirements for managerial cost accounting (MCA) information at federal agencies. The Federal Financial Management Improvement Act of 1996 built on this foundation and required, among other things, CFO Act agencies' systems to comply substantially with federal accounting standards and federal financial management systems requirements. MCA involves the accumulation and analysis of financial and nonfinancial data, resulting in the allocation of costs to organizational pursuits such as performance goals, programs, activities, and outputs. The data analyzed depend on the …

None

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Greg Abbott, regarding a legal question submitted for clarification; Whether a commissioners court may pay a vendor who has rendered goods or services to the county for the reasonable value of a benefit the county has recieved under an implied contract when the county auditor has rejected the claim (RQ-0354-GA)

This report provides a historical overview of federal authority regarding pesticide fees, including the amount of fee revenues collected over time, and summarizes the key elements of the Pesticide Registration Improvement Act (PRIA) and the revisions reflected in PRIA 2.

This report provides an estimate of the leak rate from the emergency pump well in L-basin that is to be expected during an off-normal event. This estimate is based on expected shrinkage of the engineered grout (i.e., controlled low strength material) used to fill the emergency pump well and the header pipes that provide the dominant leak path from the basin to the lower levels of the L-Area Complex. The estimate will be used to provide input into the operating safety basis to ensure that the water level in the basin will remain above a certain minimum level. The minimum basin water level is specified to ensure adequate shielding for personnel and maintain the ''as low as reasonably achievable'' concept of radiological exposure. The need for the leak rate estimation is the existence of a gap between the fill material and the header pipes, which penetrate the basin wall and would be the primary leak path in the event of a breach in those pipes. The gap between the pipe and fill material was estimated based on a full scale demonstration pour that was performed and examined. Leak tests were performed on full scale pipes as a part of this …

The mechanical properties and microstructural evolution ofmetal-ceramic bonds produced using a transient liquid phase (TLP) aredescribed. Alumina (Al2O3) was joined at 500 degrees C, 600 degrees C,and 700 degrees C using a multilayer In/Cusil-ABA (R) (commercialcopper-silver eutectic brazing alloy)/In interlayer. The introduction ofthin In cladding layers allows the system to bond at much lowertemperatures than those typically used for brazing with Cusil-ABA (R),thereby protecting temperature-sensitive components. After chemicalhomogenization, the interlayers retain an operating temperature rangesimilar to that of the brazed joints. TLP bonds made at 500 degrees C,600 degrees C, and 700 degrees C with holding times ranging from as lowas 1.5 h to 24 h had average fracture strengths above 220 MPa. Theeffects of bonding temperature and time on fracture strength aredescribed. Preliminary analysis of the interlayers shows that the Ag-Inor Cu-In intermetallic phases do not form. Considerations unique tosystems with two-phase core layers are discussed. Experiments usingsingle-crystal sapphire indicate rapid formation of a reaction layer at700 degrees C, suggesting the possibility of making strong bonds usinglower temperatures and/or shorter processing times.

A key lesson learned from the earliest optics installed in the National Ignition Facility (NIF) was that the traditional approach for maintaining cleanliness, such as the use of cleanrooms and associated garments and protocols, is inadequate. Assembly activities often negate the benefits provided by cleanrooms, and in fact generate contamination with high damage potential. As a result, NIF introduced ''clean assembly protocols'' and related practices to supplement the traditional clean room protocols. These new protocols included ''clean-as-you-go'' activities and regular bright light inspections. Introduction of these new protocols has greatly reduced the particle contamination found on more recently installed optics. In this paper we will describe the contamination mechanisms we have observed and the details of the clean assembly protocols we have successfully introduced to mitigate them.

We report on searches for B{sup -} {yields} D{sub s}{sup -} {phi} and B{sup -} {yields} D*{sub s}{sup -} {phi}. In the context of the Standard Model, these decays are expected to be highly suppressed since they proceed through annihilation of the b and {bar u} quarks in the B{sup -} meson. Our results are based on 234 million {Upsilon}(4S) {yields} B{bar B} decays collected with the BABAR detector at SLAC. We find no evidence for these decays, and we set Bayesian 90% confidence level upper limits on the branching fractions {Beta}(B{sup -} {yields} D{sub s}{sup -}{phi}) < 1.9 x 10{sup -6} and {Beta}(B{sup -} {yields} D*{sub s}{sup -} {phi}) < 1.2 x 10{sup -5}. These results are consistent with Standard Model expectations.

None

A distributed system is a collection of computers that are connected via a communication network. Distributed systems have become commonplace due to the wide availability of low-cost, high performance computers and network devices. However, the management infrastructure often does not scale well when distributed systems get very large. Some of the considerations in building a distributed system are the choice of the network topology and the method used to construct the distributed system so as to optimize the scalability and reliability of the system, lower the cost of linking nodes together and minimize the message delay in transmission, and simplify system resource management. We have developed a new distributed management system that is able to handle the dynamic increase of system size, detect and recover the unexpected failure of system services, and manage system resources. The topologies used in the system are the tree-structured network and the ring-structured network. This thesis presents the research background, system components, design, implementation, experiment results and the conclusions of our work. The thesis is organized as follows: the research background is presented in chapter 1. Chapter 2 describes the system components, including the different node types and different connection types used in the system. …

Abstract: The purpose of this study was to evaluate the potential for using biorenewable feedstocks in oil refineries. Economic analyses were conducted, with support from process modeling and proof of principle experiments, to assess a variety of potential processes and configurations. The study considered two primary alternatives: the production of biodiesel and green diesel from vegetable oils and greases and opportunities for utilization of pyrolysis oil. The study identified a number of promising opportunities for biorenewables in existing or new refining operations.

High current-density field emission from an array of carbon nanotubes, with field-emission-transistor control, and with secondary electron channel multiplication in a ceramic facing structure, have been combined in a cold cathode for rf guns and diode guns. Electrodynamic and space-charge flow simulations were conducted to specify the cathode configuration and range of emission current density from the field emission cold cathode. Design of this cathode has been made for installation and testing in an existing S-band 2-1/2 cell rf gun. With emission control and modulation, and with current density in the range of 0.1-1 kA/cm2, this cathode could provide performance and long-life not enjoyed by other currently-available cathodes

On December 12, 2005, the reference case projections from ''Annual Energy Outlook 2006'' (AEO 2006) were posted on the Energy Information Administration's (EIA) web site. We at LBNL have in the past compared the EIA's reference case long-term natural gas price forecasts from the AEO series to contemporaneous natural gas prices that can be locked in through the forward market, with the goal of better understanding fuel price risk and the role that renewables play in mitigating such risk (see, for example, http://eetd.lbl.gov/ea/EMS/reports/53587.pdf or http://eetd.lbl.gov/ea/ems/reports/54751.pdf). As such, we were curious to see how the latest AEO gas price forecast compares to the NYMEX natural gas futures strip. This brief memo presents our findings. As a refresher, our past work in this area has found that over the past five years, forward natural gas contracts (with prices that can be locked in--e.g., gas futures, swaps, and physical supply) have traded at a premium relative to contemporaneous long-term reference case gas price forecasts from the EIA. As such, we have concluded that, over the past five years at least, levelized cost comparisons of fixed-price renewable generation with variable price gas-fired generation that have been based on AEO natural gas price forecasts (rather …

Cummins Inc., in partnership with the Department of Energy, has developed technology for a new highly efficient, very low emission, diesel engine for light trucks and sport utility vehicles. This work began in April 1997, and started with very aggressive goals for vehicles in the 5751 to 8500 pound GCW weight class. The primary program goals were as follows: (1) EMISSIONS -- NOx = 0.50 g/mi; PM = 0.05 g/mi; CO = 2.8 g/mi; and NMHC = 0.07 g/mi. California decided to issue new and even tougher LEV II light truck regulations late in 1999. EPA also issued its lower Tier 2 regulations late in 2000. The net result was that the targets for this diesel engine project were lowered, and these goals were eventually modified by the publication of Federal Tier 2 emission standards early in 2000 to the following: NOx = 0.07 g/mi; and PM = 0.01 g/mi. (2) FUEL ECONOMY -- The fuel economy goal was 50 percent MPG improvement (combined city/highway) over the 1997 gasoline powered light truck or sport utility vehicle in the vehicle class for which this diesel engine is being designed to replace. The goal for fuel economy remained at 50 percent MPG …

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

The head shot of Salvador Espino. Behind him are his degrees and certificates.

OSRAM Opto Semiconductors (OSRAM) successfully completed development, fabrication and characterization of the large area, polymer based white light OLED prototype at their OLED Research and Development (R&D) facility in San Jose, CA. The program, funded by the Department of Energy (DOE), consisted of three key objectives: (1) Develop new polymer materials and device architectures--in order to improve the performance of organic light emitters. (2) Develop processing techniques--in order to demonstrate and enable the manufacturing of large area, white light and color tunable, solid state light sources. (3) Develop new electronics and driving schemes for organic light sources, including color-tunable light sources. The key performance goals are listed. A world record efficiency of 25 lm/W was established for the solution processed white organic device from the significant improvements made during the project. However, the challenges to transfer this technology from an R&D level to a large tile format such as, the robustness of the device and the coating uniformity of large area panels, remain. In this regard, the purity and the blend nature of the materials are two factors that need to be addressed in future work. During the first year, OSRAM's Materials and Device group (M&D) worked closely with the …

In this note we give multiple examples of the recently proposed New Attractors describing supersymmetric flux vacua and non-supersymmetric extremal black holes in IIB string theory. Examples of non-supersymmetric extremal black hole attractors arise on a hypersurface in WP{sub 1,1,1,1,2}{sup 4}. For flux vacua on the orientifold of the same hypersurface existence of multiple basins of attraction is established. It is explained that certain fluxes may give rise to multiple supersymmetric flux vacua in a finite region on moduli space, say at the Landau-Ginzburg point and close to conifold point. This suggests the existence of multiple basins for flux vacua and domain walls in the landscape for a fixed flux and at interior points in moduli space.

This report describes computational benchmark models for nuclear criticality derived from descriptions of the Systems for Nuclear Auxiliary Power (SNAP) Critical Assembly (SCA)-4B experimental criticality program conducted by Atomics International during the early 1960's. The selected experimental configurations consist of fueled SNAP 10A/2-type reactor cores subject to varied conditions of water immersion and reflection under experimental control to measure neutron multiplication. SNAP 10A/2-type reactor cores are compact volumes fueled and moderated with the hydride of highly enriched uranium-zirconium alloy. Specifications for the materials and geometry needed to describe a given experimental configuration for a model using MCNP5 are provided. The material and geometry specifications are adequate to permit user development of input for alternative nuclear safety codes, such as KENO. A total of 73 distinct experimental configurations are described.

None

We want to accurately know the energy spread and bunch length dependence on current in the ATF damping ring. One reason is to know the strength of the impedance: From the energy spread measurements we know whether or not we are above the threshold to the microwave instability, and from the energy spread and bunch length measurements we find out the extent of potential-well bunch lengthening (PWBL). Another reason for these measurements is to help in our understanding of the intra-beam scattering (IBS) effect in the ATF. The ATF as it is now, running below design energy and with the wigglers turned off, is strongly affected by IBS. To check for consistency with IBS theory of, for example, the measured vertical beam size, we need to know all dimensions of the beam, including the longitudinal one. But beyond this practical reason for studying IBS, IBS is currently a hot research topic at many accelerators around the world (see e.g. Ref. [1]), and the effect in actual machines is not well understood. Typically, when comparing theory with measurements fudge factors are needed to get agreement (see e.g. Ref. [1]). With its strong IBS effect, the ATF is an ideal machine for …