None

Quarterly updates on nuclear chemistry, bio-organic chemistry, general chemistry, chemical engineering (process chemistry).

>Progress is reported in the extrusion of Cu-clad Zr billets into tubing, welding of Zr strip into tubing using a roder resistance welding tube mill, piercing of Zr billets into a base tube, the casting and fabrication of U-- Nb alloys, the rolling of Zircaloy sheet, the roll-cladding of Zircaloy to U--Nb alloys, the fabrication of plate type reactor fuel elements of U--Hb alloys roll bonded with Zircaloy, fabrication of a complete U/sup 235/--Zr fuel slug for the EBR, the fabrication of U-- Zr alloy rod into EBR fuel blanket slugs, the thermal cycling of U-- Zr rods following heat treatment, the fubrication of enriched U reactor fuses, the preparation and dimensional stability of U single crystals, twinning in U crystals, diffusion in Cu- U couples, the fabrication of U billets from electrolytic crystals, the preparation of U-- Zr and Hb--U alloys, effects of radiation on U, the effects of radiation on U-- Zr alloys, the corrosion of Al, Zr, and Nb-U alloys, and the effects of heat treatments on Hb-- U alloys. (C.H.)

This quarterly report discusses ongoing research and experiments at Oak Ridge National Laboratory in the Metallurgy Division. This report discusses water cooled reactors, liquid metal cooled reactors, reactor development metallurgy, basic metallurgy, applied metallurgy, and aqueous corrosion,

None

None

None

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John Ben Shepperd, regarding a legal question submitted for clarification; Legal rate for newspaper and advertising of citation and notice of sale in delinquent tax suits.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John Ben Shepperd, regarding a legal question submitted for clarification: Payment of old age benefits by Western American Life Insurance Company upon policies issued by National Aid Life Association.

From Introduction: "The present investigation presents the lift and moment characteristics of an aspect-ratio-4.0 tail, sweptback 45^o at the quarter-chord line and pivoted about an axis sweptback 55.5^o and passing through the leading edge of the root-chord line."

From Introduction: "An investigation was conducted in an NACA Lewis altitude chamber to determine the altitude performance characteristics of a J47-25 axial-flow turbojet engine over a range of engine-inlet Reynolds number indices corresponding to altitudes from 18,000 to 54,000 feet and flight Mach numbers from 0.50 to 1.10. Reynolds number at a given corrected engine speed and is a function only of engine-inlet total pressure and temperature, was used instead of various set altitudes and flight Mach number combinations (reference 1). An example is included in the appendix to illustrate the method of obtaining conventional performance parameters for a given flight condition from the data such as presented herein."

Report presenting an investigation in the altitude test chamber to evaluate the performance of an axial-flow turbojet engine over a range of engine-inlet Reynolds number indices. Secondary effects of exhaust-nozzle flow coefficient, air-flow leakage, and inlet temperature should be considered before analyzing the effect of variations in engine-inlet Reynolds number index. Several minor design modifications proposed by the manufacturer did not produce any measurable improvement in engine performance.

None

This technical report describes the design and construction of equipment and the development of methods for multiple mold, centrifugal casting of reactor fuel slugs. Advantages of the centrifugal casting method over the conventional fabrication methods were found to be (1) fewer operations, (2) fewer and more easily recovered residues, (3) less expensive equipment, and (4) the production of fuel slugs in shapes and in alloys not well adapted to other methods of manufacture. The method consisted of vacuum melting the alloy in stoppered crucibles and bottom pouring into a spinning rotor carrying 16 radially arranged copper molds. The castings so produced were used without further processing, except for cropping the sprue end to obtain the specified length.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John Ben Shepperd, regarding a legal question submitted for clarification; Authority of Texas Technological College to lease campus space to local chapter of a national fraternity or sorority.

Report presenting the zero-lift drag of a sweptback wing and body configuration with nacelles as determined by flight tests of rocket-propelled models at Mach numbers 0.8 to 1.3. Results regarding pressure recovery are also provided.

The effects of one type of camber on the aerodynamic characteristics of rectangular wings at high subsonic and transonic speeds have been studied by applying the transonic similarity rules to the correlation of experimental data for a series of 18 cambered wings having NACA 63A2XX and 63A4XX sections, aspect ratios from 1 to 4, and thicknesses from 4 to 8 percent. The data were obtained by use of a transonic bump over a Mach number range of 0.6 to 1.1.

This report refutes earlier calculations made in the flux level of exponential piles. The results of the earlier calculations made on subcritical assemblies using critical assembly equations are in error. The calculations used in this report were more successful.

Report discussing testing on a scale model of the Convair XF2Y-1 airplane with solid-fuel rocket motors that simulate full-scale turbojet-engine characteristics at a height of 35,000 feet with full afterburning at Mach number 1.53. The model was found to have dynamic lateral instability, but these results were not likely to be found in a full-scale airplane. Information about the pitching moment, directional stability, lift-curve slope, and drag coefficients is provided.

None

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John Ben Shepperd, regarding a legal question submitted for clarification; Legality of "Appreciation Day," a retail trade promotion enterprise under submitted facts.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John Ben Shepperd, regarding a legal question submitted for clarification; Necessity for city or county to obtain a State license to operate a convalescent or nursing home.

None

In the course of the development at Argonne of high purity uranium metal in ingot form, some questions arose as to the validity of the chemical analyses of some of the impurities (particularly those for carbon, boron, and silicon), with one analytical laboratory reporting concentrations in some instances of an order of magnitude greater than another laboratory. Since the low concentrations of impurities in this material involved, in some cases, the development of modified analytical procedures and standards, it was decided to check these discrepancies by having identically prepared samples analyzed by several AEC and associated laboratories. This report is a compilation of the results obtained.