Access
Serial/Series Title
Country
States
Decade
Month
Language
19 Matching Results
Results open in a new window/tab.
Results:
1 - 19 of
19
Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin
Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date:
September 29, 1952
Creator:
Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
System:
The UNT Digital Library
Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin
Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date:
September 29, 1952
Creator:
Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
System:
The UNT Digital Library
Uranium Migration in UOâ‚‚-Bearing Ceramics
This report follows a preliminary study on uranium migration in pressed and sintered UO2-bearing bodies based on MoSi2 or Al2O3.
Date:
September 4, 1953
Creator:
Quirk, J. F.; Smalley, A. K.; Duckworth, W. H. & Ferrell, Edward Francis.
System:
The UNT Digital Library
Chemistry Division Quarterly Progress Report: Period Ending September 30, 1951
This quarterly progress report discusses topics of research and experimentation at the Oak Ridge National Laboratory, including inorganic chemistry, nuclear chemistry, radio-organic chemistry, chemistry of separations processes, chemical physics, radiation chemistry, chemistry of the solid state, instrumentation, reactor chemistry.
Date:
September 30, 1951
Creator:
Lind, Samuel C., (Samuel Colville), 1879-1965; Boyd, G. E. & Bredig, M. A.
System:
The UNT Digital Library
High-Energy Peripheral Injection into Mirror Machines
The following report proposes various methods in injecting and heating in mirror machines, using high-energy ion beams.
Date:
September 22, 1955
Creator:
Linlor, William I., 1915-
System:
The UNT Digital Library
Energy Transfer Between Modified Maxwell Distributions
Abstract: "A particularly conventional modified form of Maxwell distribution is chosen. The modified expressions for (a) the energy transfer from the ions to the electrons in a plasma and (b) the brehmestrahlung from the electrons are calculated. Using the expressions some possible steady-state conditions for the ion and electron gases are derived and compared with those for the usual Maxwell distributions."
Date:
September 20, 1956
Creator:
Greyber, Howard D. & Bing, G.
System:
The UNT Digital Library
Adiabatic Injection
From introduction comments: The present analysis is intended to examine the relations for "adiabatic" injection in general from a different point of view.
Date:
September 22, 1955
Creator:
Linlor, William I., 1915-
System:
The UNT Digital Library
Continuous injection processing
From introduction: "In this report we consider a few non-adiabatic processes. The types to be discussed will be limited because of two reasons: first, complete descriptions are available for some processes; second, as time goes on alternative injection methods undoubtedly will be discovered, so this list must necessarily be incomplete."
Date:
September 23, 1955
Creator:
Linlor, William I., 1915-
System:
The UNT Digital Library
OMR Control-Safety Rod Component Development Tests
Abstract: A magnetic-jack control-safety rod is under development for the 45.5 thermal megawatt Organic Moderated Reactor. The rod is "unitized," i.e., the poison element, drive, position indicator, and shock absorber are contained in a compact assembly which is inserted in a regular fuel channel opening in the core. Tests to develop components capable of operating under these conditions are described and results are reported.
Date:
September 15, 1959
Creator:
Howell, J. D.
System:
The UNT Digital Library
Materials for Fluorine Generator Anode Assemblies
Corrosion of anode assembly materials in fluorine generators is pronounced, therefore, selection of the proper materials for construction is important. Several metals and alloys have been tested for corrosion resistance when anodic in a fluorine test cell. In general, copper, copper alloys and magnesium alloys offer the best corrosion resistance.
Date:
September 28, 1956
Creator:
Simmons, R. E.; Rossmassler, W. R.; Hoskins, C. W. & Johnston, R. A.
System:
The UNT Digital Library
Some Thermodynamic Properties of Freon-114
Introduction: The thermodynamic properties of Freon-114 presented herein supplement those of Volume I and encompass a range of temperature above the critical to 400 F &176 F.
Date:
September 3, 1959
Creator:
Van Wie, N. H. & Ebel, Robert A.
System:
The UNT Digital Library
Interim Report on Investigation of Dynamic Characteristics of Relays: June-July 1959
From scope of work: This report investigates the dynamic characteristics of sealed military type relays as affected by applied coil voltage and/or current, temperature, spring tension, contact force, contact overtravel, and mechanical clearances.
Date:
September 1959
Creator:
unknown
System:
The UNT Digital Library
Experimental Determination of the Pressure Drop Through a Pebble Bed
Abstract: "The pressure drop associated with the flow of air through a cylindrical bed of spherical pebbles has been investigated experimentally. The results of this investigation are reported here."
Date:
September 1959
Creator:
Randall, D. E. & Millwright, S. S.
System:
The UNT Digital Library
Pressure and Thermal Stresses at a Pipe Attachment to a Sphere
Abstract: Design nomographs and equations have been prepared for determining the bending stresses and hoop stresses at the junction of a cylinder and sphere when: (1) Internal pressure exists in the sphere and (2) There is a difference in average temperature between the cylinder and the sphere. A correlation of calculated stresses and photoelastically determined stresses for models with internal pressure is presented.
Date:
September 21, 1959
Creator:
Deagle, Lorenzo
System:
The UNT Digital Library
Preliminary Hazards Summary Report for the ML-1 Nuclear Power Plant
From abstract: "Neutronic characteristics, the control and instrumentation system, equipment description and plant safety considerations of the ML-1 (mobile, low power) nuclear power plant. The site is described with reference to geology, climate, and population density."
Date:
September 30, 1959
Creator:
Linenberger, G. A.
System:
The UNT Digital Library
Selected Values of the Physical Properties of Various Materials
Report issued by the Argonne National Laboratory discussing selected physical properties of various solids, liquids, and gases of interest in nuclear reactor heat transfer and fluid flow analysis. In most cases, values for thermal conductivity specific heat, density, viscosity, and Prandtl numbers are given as functions of temperature. This report includes tables, and illustrations.
Date:
September 1958
Creator:
Tebo, F. J.
System:
The UNT Digital Library
Standard Practices for Design of MTR and ETR Safety Circuits
Report containing notes for designing safety circuits for the Materials Testing Reactor (MTR) and Engineering Test Reactor (ETR).
Date:
September 15, 1957
Creator:
Jones, L. H.
System:
The UNT Digital Library
Startup Operation of a Production Facility for Separating Barium-140 from MTR Fuel
Report describing "the startup operation of a batch production facility for separating and purifying barium-140 from short-cooled MTR fuel" (p. 3).
Date:
September 1, 1957
Creator:
Legler, Billy Mason; Fairbourne, S. F.; Kelly, P. N. & Robinson, R. A.
System:
The UNT Digital Library
Chemical Processing Instrumentation and Control Research Program
Report regarding the chemical processing instrumentation designs and problems at the Idaho Chemical Processing Plant.
Date:
September 18, 1957
Creator:
Schneider, Harry
System:
The UNT Digital Library