Abstract: "The kinematics of elastic scattering, inelastic scattering, and the two body reaction problem is developed in the relativistic limit and exact expressions obtained for the energies, angles, and solid-angle transformations involved. The results are specialized for zero rest mass of one or more of the particles involved. An outline for the coding of the problem on the I.B.M. Electronic Data Processing Machine, Type 701 is presented."

From abstract: "To seek information for a better understanding of the phenomena involved in fall-out, a fireball effect was simulated in a small closed room by subjecting various materials to a high-current (~360 amp.) are produced between graphite electrodes, and anode being impregnated with radioactive materials. The time duration of the arc, power dissipated, and distance from the samples were controlled. The radioactivity which remained airborne, that which settled out onto the floor and its distribution, and that deposited on the test material was measured, and percentages of the total measured activity were determined."

An estimate was made of the upper bound for the half-time of dissociation at 100 atm for ammonia, methane, and propane at 2500 deg K and hydrogen at 5000 deg K. In each case a unimolecular reactron in the homogeneous gas phase was chosen as most suitable for this purpose. Slater's theory has been used to estimate the necessary frequency factors. The upper bounds to the half- time for dissociation range from 3 x 10⁻⁷ to 6 x 10⁻⁶ sec. Extrapolation of decomposition rate data obtained at --1000 deg C and 1 atm pressure gives smaller values for the half-time of dissociation.

From introduction: "This report describes research on the development of compositions and techniques for porcelain enameling uranium fuel slugs used in Hanford production reactors."

This report discusses three experimental methods used to study the kinetics of the reaction between zirconium and UO2.

This report follows a study that was aimed at the collection of experimental data needed to estimate the maximum safe temperatures and dispersed UO2 contents for MoSi2--UO2 fuel elements exposed to air.

The following report follows the inspections of a number of eddy-current instrument procedures. The objectives of these tests were to detect both weld defects and lack of integrity of the body of the fuel elements.

The following report examines the most suitable enamels recommended for protection of aluminum slug cans.

Thesis describing the Auger effect in the heaviest elements. The elements detailed in the report are ytterbium, polonium, and uranium. Measurements of K fluorescence yields and K Auger electron intensity ratios are given.

Abstract: "Formulas are derived for the trajectory of a charged particle in a magnetic field which is a linear function of time. Graphs of certain functions are presented, by means of which a trajectory with given initial position and velocity may be plotted."

The following document provides measurements, equations and figures describing the minimum power coil geometries for D.C. magnetic mirrors.

Abstract: "A scheme is discussed in which D+ ions would be accelerated to about 100 kev in a conventional accelerator, then be sent through a gas target frmo which about half the ions would emerge neutral with very little scattering or energy loss; the neutral beam would then cross into a magnetic field and part of the atoms would be ionized and trapped by colliding with the already trapped ions. The smallest mirror machine with a central field of 30-40 kilogauss, 2;1 mirror ratio and β = 01 to 0.5 that would trap most of the neutral beam in the steady state, would be about a meter in diameter and require the order of hundreds of amperes of D+ ions into the neutralizer. The smallest stellerator with a field of 30 kilogauss and β = 0.1 that would trap most of the neutral beam would be about a meter long and require about 10 amperes of D+ ions. A preliminary mirror machine experiment that might be done using the 1/2-ampere, 100-kev D+ beam from the UCRL spare MTA injector is discussed. A method of starting these machine is discussed."

"High energy injection into Table Top is discussed for the case in which the ion sources are to be located inside the mirrors in the mirror region. Two typical ion source geometries are considered. maximum time intervals available for injection indicated are on the order of 7 to 25 microseconds."

Data on the crystal structures of the common modifications of the elements at zero pressure.

This is the thirty-seventh progress report of the Laboratory for Nuclear Science at the Massachusetts Institute of Technology. Progress during the period of June 1, 1955 through August 31, 1955 is reported on: (1) Chemistry of the fission elements group, (2) Nuclear chemistry (inorganic) group, (3) Nuclear chemistry (organic) group, (4) Cosmic ray group, (5) Elementary particle scattering group, (6) neutron physics group, (7) ONR generator group, (8) Radioactivity group, (9) Cyclotron group, (10) Synchrotron group, (11) Theoretical group, (12) Personnel listing.

The theory and preliminary laboratory investigations presented in this technical report were intended to examine the general feasibility of injection disposal of radioactive wastes and to establish an understanding of the phenomena governing the travel of trace chemicals through natural porous media. Detailed studies of fluid velocity variations resulting from density differences between the injected and displaced liquids have been made. the ion exchange studies have been limited to strontium and calcium. Strontium 90 is considered to be the most hazardous of the fission products and should represent the radioisotope upon which to judge the merits of injection disposal. Consideration should also be given to cesium in evaluation the health hazards of injection disposal.

An Alpha Scintillation Probe for use with the HAPO Cart Poppies has been designed to replace the air proportional probes presently used. The new probe has an average geometry of about 15 or 16 percent over an effective probe area of 23.4 in². Stability of operation under normal conditions of vibrations, humidity and temperature are inherent qualities and the average background count is stable at about two counts per minute. The high voltage used is in the order of 1,200 to 1,250 volts with a current requirement of 100 microamperes.

This is a report of what may be an invention in a process or processes for preparing roughly spherical uranium metal particles suitable for use in matrix type nuclear reactor fuel elements.

Document HW-33176, "A Proposed Scope of the 100-K Sulfuric Acid Addition Facilities", presented the justification and bases for a sulfuric acid addition facility at the 183-K headhouses and included a system for adding the acid to the raw water. Since the issue of this document several factors to consider in such a system have been brought to light by experience gained both at K and at other areas. The alternate system presented here eliminates several of the troublesome points in the previously proposed system.

A method of performing a series of solvent extractions using a minimum of pulse generators is briefly outlined.

The surfaces of cold rolled, half hard, nitric acid treated, autoclave etched, 2S aluminum coupons were studied by optical and electronoscopic methods, before and after exposure to hot water alone and hot water and neutron bombardment. The non-exposed aluminum surfaces have a characteristic pattern which is absent in the exposed coupons. All of the exposed coupons were corroded. In general the coupons exposed to the higher flux intensities of irradiation were more severely corroded than those exposed to the lower flux intensities of irradiation or to the hot water alone. Representative photo-and electron micrographs illustrate the various types of surface structure observed on the control and experimental coupons.

Three proprietary high strength, low alloy steels and a high strength alloy steel were welded without a pre or post heat treatment with low hydrogen, iron powder coated electrodes of appropriate physical properties. Tensile and bend tests performed upon sample weldments indicated that they exhibited properties very similar to those for the base plate and that there were no indications of brittleness, notch sensitivity, underbead cracking, lack of fusion, hot cracking, undercutting, or crater cracking.

For greater understanding of possible explosion hazards knowledge is needed of the volume of hydrogen evolved in the calcium and magnesium-nitric acid reactions. Measurements of evolved hydrogen are presented in this project.

Thermal neutron measurements made on five weapons during Operation Teapot indicated that these neutrons contribute at most 2 per cent of the total neutron dose in air. However, the total fluxes were high and thermal neutrons may become important under shielding conditions and may significantly affect the responses of the film badges and certain sensitive dose detectors, especially when the neutron to gamma flux ratio is high.