Abstract: "This is the first interim report of a literature survey investigating the uses and technology of radioscopes in the countries of the world, with particular emphasis necessarily placed on those more highly industrialized nations. Part I includes a general summary of the quantity and quality of radioisotope work being performed in these countries. Among the outstanding radioisotope applications with respect to quantity is the work of Japan in chemical research, that of USSR in metals research, and that in the USA in medical research. A detailed qualitative examination of the relatively narrow region of radioisotope applications in leak detection is also presented. Part II of this report gives a direct comparison between the progress and status of the US and the USSR in the varied uses of radio-isotopes."

From summary: "The influence of the structure of phosphate esters on the distribution coefficient of uranium between solutions of these esters in carbon tetrachloride and aqueous nitrate solutions has been studied. Esters of secondary alcohols showed higher distribution coefficients than primary alcohols. Phenyl esters extracted less uranium than alkyl esters, and the presence of other negative groups also resulted in less extraction. Compounds containing carbon to phosphorus bonds gave higher distribution coefficients than the corresponding esters, and the distribution coefficients increased with the number of such carbon to phosphorus bonds. Tributyl phosphine oxide (with three carbon to phosphorus bonds) showed high distribution coefficients with many salts, including uranyl nitrate, uranyl sulfate, uranyl chloride, thorium nitrate, plutonium (IV) nitrate and some of the fission products in nitrate solution. It is planned to study these and similar compounds further."

Report discussing the equations of the Debye-Huckel theory modified to include quantum statistics.

Report discussing the application of some previously established methods to yield a calculation of the pressure and internal energy functions of a system of point charges interacting only with Coulomb forces.

"A method of distributing fuel equally to a plurality of spray nozzles in a gas-turbine engine by means of balanced-diaphragm fuel distributors is presented. The experimental performance of three of eight possible distributor arrangements are discussed. An analysis of all eight arrangements is included. Criterions are given for choosing a fuel-distributor arrangement to meet specific fuel-system requirements of fuel-distribution accuracy, spray-nozzle pressure variations, and fuel-system pressures" (p. 1).

"A study has been made of the variation of seaplane hull weight with length-beam ratio in a systematic series of hulls designed for constant gross weight and similar spray characteristics. It is found that increases in the length-beam ratio bring about small reductions in the hull weight if it is assumed that seaplanes having the same weight and bottom shape will be designed for the same load factor. A short discussion is also given to show the reduction in load factor that may occur with high length-beam ratios" (p. 1).

Report presenting the low-speed longitudinal characteristics of swept wings derived from investigations at high Reynolds numbers. Two different types of flow separation, trialing-edge and leading-edge separation, are identified and discussed.

"An investigation of the jet-spreading characteristics of a 16 inch ram-jet engine was conducted in the 8 by 6 foot supersonic tunnel at a Mach number of 2.0; both a converging nozzle having a contraction ratio of 0.71 and a cylindrical extension to the combustion chamber were used. The jet boundaries determined by means of pitot pressure surveys were compared with boundaries calculated from one-dimensional continuity and momentum relations. For the cylindrical nozzle, the jet reaches its maximum diameter, 4 percent greater than calculated, about 0.6 nozzle-exit diameter downstream of the nozzle exit" (p. 1).

Data are presented showing the penetration characteristics of liquid jets directed approximately perpendicular to a high-velocity air stream for jet-nozzle-throat diameters from 0.0135 to 0.0625 inch, air stream densities from 0.0805 to 0.1365 pound per cubic foot, liquid jet velocities from 168.1 to 229.0 feet per second and a liquid jet density of approximately 62 pounds per cubic foot. The data were analyzed and a correlation was developed that permitted the determination of the penetration length of the liquid jet for any operation condition within the range of variables investigated.

Report presenting an exploratory free-flight investigation at zero lift of several rocket-powered drag-research models with tapered 4-percent-thick wings for a range of Mach numbers. Wings with an aspect ratio of 3.11 and trailing-edge thickness of 0, 1/3 maximum thickness, 2/3 maximum thickness, and 3/3 maximum thickness were tested.

"An investigation was conducted in a 3.4- by 3.4-inch duct to determine the characteristics of the supersonic flow downstream of four wire-mesh screen nozzles with nominal design Mach numbers in the range between 1.97 and 2.58. Two types of disturbances were observed in the flow field: a fine network of interacting expansion and compression waves which were formed immediately downstream of the screens and appeared to dissipate within 25 to 40 wave intersections; and relatively strong oblique shock waves that originated at the junctions of the screens and the walls and were reflected throughout the length of the duct. Regions of fairly uniform flow were found to exist" (p. 1).

Investigation to determine lift, drag, and pitching-moment characteristics of several engine-strut-body combinations was conducted over range of angles of attack from 0 degrees to 10 degrees at Mach numbers of 1.8 and 2.0. The average Reynolds number based on body length was 28x106. Data are presented without analysis and indicate decreases in minimum drag and lift curve slope with decreasing in minimum drag and lift curve slope with decreasing strut length. Decreases in minimum drag also noted with rear-ward movement of engines.

Report presenting testing using a Douglas D-558-I airplane to determine the effect of wing vortex generators on some of the undesirable handling characteristics of aircraft flying at hypercritical speeds. The effects on buffeting, lateral unsteadiness, change in trim, and loss of control effectiveness were the primary objectives.

The performance of a turbojet engine with a two-stage turbine, an adjustable first-stage turbine stator, and a variable-area exhaust nozzle was investigated at selected constant engine speeds and two simulated flight conditions. For the particular component characteristics of the engine investigated, little improvement in thrust levels of interest by use of an adjustable rather than an optimum fixed first-stage turbine stator.

Report presenting an investigation to determine the lateral control characteristics of constant-percent-chord trailing-edge elevons on a tailless wing-body combination with a pointed wing of aspect ratio 2. The effectiveness of inset tabs in reducing the elevon hinge moment was also determined. Results include the lift, drag, pitching moment, rolling moment, elevon hinge moment, tab moment, elevon load, and center of pressure of elevon load.

Report presenting an investigation in the transonic tunnel to determine the influence of a change in body shape on the effects of twist and camber. Twist and camber were found to greatly improve the maximum lift-drag ratios of the wing-modified fuselage configuration through the speed range, but reduced the ratios for a wing-curved fuselage configuration. Results regarding basic aerodynamic data are also provided.

Report presenting an investigation of the feasibility of modifying the transient portion of the stick force in abrupt maneuvers in order to eliminate inadvertent normal-acceleration overshoots. The modification consists of additional stick force proportional to a quantity which leads the normal acceleration. The characteristics introduced by the inclusion of the force were considered to be very desirable by pilots.

Report presenting performance characteristics of three similar canard-type, long-range ram-jet missiles to evaluate the relative merits of several types of engine installation. Some of the engine installations included a twin-engine nacelle-type installation strut-mounted above and below the fuselage, a twin-engine nacelle-type installation mounted on the wing, and a single-engine fuselage-contained installation with an underslung scoop-type inlet.

From Introduction: "The altitude performance characteristics of the prototype J40-WE-8 turbojet engine were determined in the NACA Lewis altitude wind tunnel. The altitude operational characteristics of the engine are presented herein. The results of a brief study of the effect of the two different grades of fuel (MIL-F-5624A grades JP-3 and JP-4) on steady-state engine performance at an altitude of 45,000 feet and a flight Mach number of 0.20 are also given."

"This report compares the experimental force and moment data obtained by pressure measurements on a wing of aspect ratio 8.02, 45 degree sweptback of the quarter-chord line, taper ratio of 0.45, and NACA 63(sub 1)A012 airfoil sections with the calculated loadings obtained by the standard methods proposed by Weissinger, Falkner, and Multopp, as well as by several variations of these methods" (p. 1175).

From abstract: "The cross section of carbon for the n, y reaction was determined using samples of graphite, barium carbonate and carbon dioxide. The results were consistent only when samples were used which were enriched in C¹³."

This report deals with the (1.1) physical properties of graphite, (1.2) effects of pile irradiation on the properties of graphite, (1.3) effect of irradiation on "ceramic" materials, (1.4) exposure and dosage for radiation damage experiments, (1.5) apparatus for the measurement of the thermal conductivity of solids, (1.6) effects of radiation on ice -- the thermoluminescence of ice, (1.7) investigation of color centers and other optical properties of single crystals. (2.1) radiation chemistry of liquids, (3.1) radiochemical investigation of the spontaneous fission of Cm242, (3.2) radiochemical service, (3.3) on the one-body model of alpha, (4.1) spectrographic analysis, (4.2) chemical analysis, (5.1) the 60-inch cyclotron.

This report describes observations of a sample of Carbon-14, or radiocarbon, made using the method of mass spectrometry.

Report presenting an investigation of two internal-contraction inlets in the block tunnel. The fixed inlet was tested at Mach number 2.94 with a conventional ram-scoop bleed and a shock-trap bleed. Results regarding the fixed-capture-area inlet and variable-capture-area inlet are provided.