This thesis presents a new determination of {Lambda}{sub QCD} from Next-to-Leading Order QCD fits to the Q{sup 2} dependence of neutrino-iron structure functions. This is the first measurement of {Lambda}{sub QCD} which uses a theoretical model that fully accounts for heavy quark production. Compared with previous neutrino measurements, the result has improved understanding of the largest systematic uncertainties on the muon and hadron energy scales. These improvements lead to one of the most precise determination of {alpha}{sub S} at moderate Q{sup 2}. NuTeV is a neutrino-iron deep inelastic scattering (DIS) experiment that collected data during 1996-97 at Fermilab. The key features of NuTeV include its sign-selected beam which produced separate high purity neutrino and antineutrino beams, and its continuous calibration beam which enabled NuTeV to considerably improve the knowledge of energy scales which have dominated uncertainties in the previous measurements.

The use of boron neutron capture to boost tumor dose in fast neutron therapy has been investigated at several fast neutron therapy centers worldwide. This treatment is termed boron neutron capture enhanced fast neutron therapy (BNCEFNT). It is a combination of boron neutron capture therapy (BNCT) and fast neutron therapy (FNT). It is believed that BNCEFNT may be useful in the treatment of some radioresistant brain tumors, such as glioblastoma multiform (GBM). A boron neutron capture enhanced fast neutron therapy assembly has been designed for the Fermilab Neutron Therapy Facility (NTF). This assembly uses a tungsten filter and collimator near the patient's head, with a graphite reflector surrounding the head to significantly increase the dose due to boron neutron capture reactions. The assembly was designed using Monte Carlo radiation transport code MCNP version 5 for a standard 20x20 cm{sup 2} treatment beam. The calculated boron dose enhancement at 5.7-cm depth in a water-filled head phantom in the assembly with a 5x5 cm{sup 2} collimation was 21.9% per 100-ppm {sup 10}B for a 5.0-cm tungsten filter and 29.8% for a 8.5-cm tungsten filter. The corresponding dose rate for the 5.0-cm and 8.5-cm thick filters were 0.221 and 0.127 Gy/min, respectively; about …

The top quark, the most recently discovered quark, is the most massive known fundamental fermion. Precision measurements of its mass, a free parameter in the Standard Model of particle physics, can be used to constrain the mass of the Higgs Boson. In addition, deviations in the mass as measured in different channels can provide possible evidence for new physics. We describe a measurement of the top quark mass in the decay channel with two charged leptons, known as the dilepton channel, using data collected by the CDF II detector from p{bar p} collisions with {radical}s = 1.96 TeV at the Fermilab Tevatron. The likelihood in top mass is calculated for each event by convolving the leading order matrix element describing q{bar q} {yields} t{bar t} {yields} b{ell}{nu}{sub {ell}}{bar b}{ell}'{nu}{sub {ell}'} with detector resolution functions. The presence of background events in the data sample is modeled using similar calculations involving the matrix elements for major background processes. In a data sample with integrated luminosity of 1.0 fb{sup -1}, we observe 78 candidate events and measure M{sub t} = 164.5 {+-} 3.9(stat.) {+-} 3.9(syst.) GeV/c{sup 2}, the most precise measurement of the top quark mass in this channel to date.

I investigate why gendered images of Hatshepsut influenced androgynous images of Nefertiti in New Kingdom Egypt and how Nefertiti and Akhenaten used their images in the promotion of their monotheistic religion; through a contextual, stylistic and feminist examination of the images. Hatshepsut cultivated images of herself to legitimize her rule in relation to canonical kings before her. Similarly, Nefertiti represented herself as a figure indiscernible from Akhenaten, creating an image of female co-rulership. Although the visual representations of both Hatshepsut and Nefertiti differ, the concepts behind each are analogous. They both manipulated androgyny to create images displaying powerful women equal in status to male Egyptian kings.

An understanding of the potential roles as lipid mediators of a family of bioactive metabolites called N-acylethanolamines (NAEs) depends on their accurate identification and quantification. The levels of 18C unsaturated NAEs (e.g. NAE18:2, NAE 18:3, etc.) in wild-type seeds (about 2000 ng/g fw) generally decreased by about 80% during germination and post-germinative growth. In addition, results suggest NAE-degradative fatty acid amide hydrolase (FAAH) expression does not play a major role in normal NAE metabolism as previously thought. Seedlings germinated and grown in the presence of abscisic acid (ABA), an endogenous plant hormone, exhibited growth arrest and secondary dormancy, similar to the treatment of seedlings with exogenous N­lauroylethanolamine (NAE12:0). ABA-mediated growth arrest was associated with higher levels of unsaturated NAEs. Overall, these results are consistent with the concept that NAE metabolism is activated during seed germination and suggest that the reduction in unsaturated NAE levels is under strict temporal control and may be a requirement for normal seed germination and post-germinative growth.

This thesis describes a search for the rare decay K{sub L} {yields} {pi}{sup 0}{pi}{sup 0}{gamma} using data from the KTeV experiment, using the topology K{sub L} {yields} {pi}{sup 0}{pi}{sub D}{sup 0}{gamma} (where {pi}{sub D}{sup 0} {yields} {gamma}e{sup +}e{sup -}). Due to Bose statistics and the real nature of the photon, the K{sub L} {yields} {pi}{sup 0}{pi}{sup 0}{gamma} decay can proceed at lowest order only by the Cp conserving direct emission of an E2 photon. The decay vanishes to O(p{sup 4}) in chiral perturbation theory and is a probe of the theory to the sixth order. The primary background to this decay consists of K{sub L} {yields} {pi}{sup 0}{pi}{sup 0}{pi}{sub D}{sup 0} events with one lost photon. The upper limit for the decay K{sub L} {yields} {pi}{sup 0}{pi}{sup 0}{gamma} presented in this thesis is 2.32 x 10{sup -7} at the 90% confidence level. This upper limit was derived from both 1997 and 1999 data, using a blind analysis. The upper limit was derived from a Feldman-Cousins method, based on a weighted total of 0.53 data events in the signal region with an expected K{sub L} {yields} {pi}{sup 0}{pi}{sup 0}{pi}{sub D}{sup 0} background of 0.37 {+-} 0.28 events. The previous upper limit …

The Run II physics program at the Tevatron started in the spring of 2001 with protons and antiprotons colliding at an energy of {radical}s = 1.96 TeV, and is continuing with about 1.2 fb{sup -1} of data currently collected by the CDF and D0 experiments. A measurement of the b-jet cross section as function of jet transverse momentum p{perpendicular} has been performed using 312 pb{sup -1} of D0 data. The results for this measurement were obtained and are presented herein. A neural network algorithm was used to identify b jets.

The inductively coupled plasma (ICP) is an atmospheric pressure ionization source. Traditionally, the plasma is sampled via a sampler cone. A supersonic jet develops behind the sampler, and this region is pumped down to a pressure of approximately one Torr. A skimmer cone is located inside this zone of silence to transmit ions into the mass spectrometer. The position of the sampler and skimmer cones relative to the initial radiation and normal analytical zones of the plasma is key to optimizing the useful analytical signal [1]. The ICP both atomizes and ionizes the sample. Polyatomic ions form through ion-molecule interactions either in the ICP or during ion extraction [l]. Common polyatomic ions that inhibit analysis include metal oxides (MO{sup +}), adducts with argon, the gas most commonly used to make up the plasma, and hydride species. While high resolution devices can separate many analytes from common interferences, this is done at great cost in ion transmission efficiency--a loss of 99% when using high versus low resolution on the same instrument [2]. Simple quadrupole devices, which make up the bulk of ICP-MS instruments in existence, do not present this option. Therefore, if the source of polyatomic interferences can be determined and …

In this thesis our main interest has been to investigate metallic photonic crystal and its applications. We explained how to solve a periodic photonic structure with transfer matrix method and when and how to use modal expansion method. Two different coating methods were introduced, modifying a photonic structure's intrinsic optical properties and rigorous calculation results are presented. Two applications of metallic photonic structures are introduced. For thermal emitter, we showed how to design and find optimal structure. For conversion efficiency increasing filter, we calculated its efficiency and the way to design it. We presented the relation between emitting light spectrum and absorption and showed the material and structural dependency of the absorption spectrum. By choosing a proper base material and structural parameters, we can design a selective emitter at a certain region we are interested in. We have developed a theoretical model to analyze a blackbody filament enclosed by a metallic mesh which can increase the efficiency of converting a blackbody radiation to visible light. With this model we found that a square lattice metallic mesh enclosing a filament might increase the efficiency of incandescent lighting sources. Filling fraction and thickness dependency were examined and presented. Combining these two parameters …

This study establishes a set of magnetics-based tools that have been integrated with microfluidic systems. The overall impact of the work begins to enable the rapid and efficient manipulation and detection of magnetic entities such as particles, picoliter-sized droplets, or bacterial cells. Details of design, fabrication, and theoretical and experimental assessments are presented. The manipulation strategy has been demonstrated in the format of a particle diverter, whereby micron-sized particles are actively directed into desired flow channels at a split-flow junction by means of integrated microelectromagnets. Magnetic detection has been realized by deploying Giant Magnetoresistance (GMR) sensors--microfabricated structures originally developed for use as readout elements in computer hard-drives. We successfully transferred the GMR technology to the lab-on-a-chip arena, and demonstrated the versatility of the concept in several important areas: real-time, integrated monitoring of the properties of multiphase droplet flows; rapid quantitative determination of the concentration of magnetic nanoparticles in droplets of ferrofluids; and high-speed detection of individual magnetic microparticles and magnetotactic bacteria. The study also includes novel schemes for hydrodynamic flow focusing that work in conjunction with GMR-based detection to ensure precise navigation of the sample stream through the GMR detection volume, therefore effectively establishing a novel concept of a microfabricated …

Leptoquarks are exotic particles that have color, electric charge, and lepton number and appear in extended gauge theories and composite models. Current theory suggests that leptoquarks would come in three different generations corresponding to the three quark and lepton generations. We are searching for charge 1/3 third generation leptoquarks produced in p{bar p} collisions at {radical}s = 1.96 TeV using data collected by the D0 detector. Such leptoquarks would decay into either a tau-neutrino plus a b-quark or, if heavy enough, to a tau-lepton plus a t-quark. We present preliminary results on an analysis where both leptoquarks decay into neutrinos giving a final state with missing energy and two b-quarks using 367 pb{sup -1} of Run II D0 data taken between August 2002 and September 2004. We place upper limits on {sigma}(p{bar p} {yields} LQ{ovr LQ})B{sup 2} as a function of the leptoquark mass M{sub LQ}. Assuming B = 1, we exclude at the 95% confidence level third generation leptoquarks with M{sub LQ} < 197 GeV/c{sup 2}.

Fluidized beds (FB) reactors are widely used in the polymerization industry due to their superior heat- and mass-transfer characteristics. Nevertheless, problems associated with local overheating of polymer particles and excessive agglomeration leading to FB reactors defluidization still persist and limit the range of operating temperatures that can be safely achieved in plant-scale reactors. Many people have been worked on the modeling of FB polymerization reactors, and quite a few models are available in the open literature, such as the well-mixed model developed by McAuley, Talbot, and Harris (1994), the constant bubble size model (Choi and Ray, 1985) and the heterogeneous three phase model (Fernandes and Lona, 2002). Most these research works focus on the kinetic aspects, but from industrial viewpoint, the behavior of FB reactors should be modeled by considering the particle and fluid dynamics in the reactor. Computational fluid dynamics (CFD) is a powerful tool for understanding the effect of fluid dynamics on chemical reactor performance. For single-phase flows, CFD models for turbulent reacting flows are now well understood and routinely applied to investigate complex flows with detailed chemistry. For multiphase flows, the state-of-the-art in CFD models is changing rapidly and it is now possible to predict reasonably well …

In an effort to mimic the growth of natural bone, self-assembling, micelle and gel-forming copolymers were used as a template for calcium phosphate precipitation. Because of the cationic characteristics imparted by PDEAEM end group additions to commercially available Pluronic{reg_sign} Fl27, a direct ionic attraction mechanism was utilized and a polymer-brushite nanocomposite spheres were produced. Brushite coated spherical micelles with diameters of {approx}40 nm, and agglomerates of these particles (on the order of 0.5 {mu}m) were obtained. Thickness and durability of the calcium phosphate coating, and the extent of agglomeration were studied. The coating has been shown to be robust enough to retain its integrity even below polymer critical micelle concentration and/or temperature. Calcium phosphate-polymer gel nanocomposites were also prepared. Gel samples appeared as a single phase network of agglomerated spherical micelles, and had a final calcium phosphate concentration of up to 15 wt%. Analysis with x-ray diffraction and NMR indicated a disordered brushite phase with the phosphate groups linking inorganic phase to the polymer.

Immunoassays have been utilized for the detection of biological analytes for several decades. Many formats and detection strategies have been explored, each having unique advantages and disadvantages. More recently, surface-enhanced Raman scattering (SERS) has been introduced as a readout method for immunoassays, and has shown great potential to meet many key analytical figures of merit. This technology is in its infancy and this dissertation explores the diversity of this method as well as the mechanism responsible for surface enhancement. Approaches to reduce assay times are also investigated. Implementing the knowledge gained from these studies will lead to a more sensitive immunoassay requiring less time than its predecessors. This dissertation is organized into six sections. The first section includes a literature review of the previous work that led to this dissertation. A general overview of the different approaches to immunoassays is given, outlining the strengths and weaknesses of each. Included is a detailed review of binding kinetics, which is central for decreasing assay times. Next, the theoretical underpinnings of SERS is reviewed at its current level of understanding. Past work has argued that surface plasmon resonance (SPR) of the enhancing substrate influences the SERS signal; therefore, the SPR of the extrinsic …

Eddy current nondestructive evaluation (NDE) is usually carried out by exciting a time harmonic field using an inductive probe. However, a viable alternative is to use transient eddy current NDE in which a current pulse in a driver coil produces a transient .eld in a conductor that decays at a rate dependent on the conductivity and the permeability of the material and the coil configuration. By using transient eddy current, it is possible to estimate the properties of the conductive medium and to locate and size potential .aws from the measured probe response. The fundamental study described in this dissertation seeks to establish a theoretical understanding of the transient eddy current NDE. Compared with the Fourier transform method, the derived analytical formulations are more convenient when the transient eddy current response within a narrow time range is evaluated. The theoretical analysis provides a valuable tool to study the effect of layer thickness, location of defect, crack opening as well as the optimization of probe design. Analytical expressions have been developed to evaluate the transient response due to eddy currents in a conductive plate based on two asymptotic series. One series converges rapidly for a short time regime and the other …

Direct imaging of extrasolar planets is an important, but challenging, next step in planetary science. Most planets identified to date have been detected indirectly--not by emitted or reflected light but through the effect of the planet on the parent star. For example, radial velocity techniques measure the doppler shift in the spectrum of the star produced by the presence of a planet. Indirect techniques only probe about 15% of the orbital parameter space of our solar system. Direct methods would probe new parameter space, and the detected light can be analyzed spectroscopically, providing new information about detected planets. High contrast adaptive optics systems, also known as Extreme Adaptive Optics (ExAO), will require contrasts of between 10{sup -6} and 10{sup -7} at angles of 4-24 {lambda}/D on an 8-m class telescope to image young Jupiter-like planets still warm with the heat of formation. Contrast is defined as the intensity ratio of the dark wings of the image, where a planet might be, to the bright core of the star. Such instruments will be technically challenging, requiring high order adaptive optics with > 2000 actuators and improved diffraction suppression. Contrast is ultimately limited by residual static wavefront errors, so an extrasolar planet …

Leptoquarks (LQ) are particles with both color and lepton number predicted in some gauge theories and composite models. Current theory suggests that leptoquarks would come in three different generations. We report on a search for charge 1/3 third generation leptoquarks produced in p{bar p} collisions at {radical}s = 1.96 TeV using data collected by the D0 detector at Fermilab. Such leptoquarks would decay into a tau-neutrino plus a b-quark with branching fraction B. We present preliminary results on an analysis where both leptoquarks decay into neutrinos giving a final state with missing energy and two b-jets. Using 425(recorded) pb{sup -1} of data, we place limits on {sigma}(p{bar p} {yields} LQ{ovr LQ})B{sup 2} as a function of the leptoquark mass. Assuming B = 1, we excluded at the 95% confidence level scalar third generation leptoquarks with M{sub LQ} < 219 GeV.

We describe a general search for resonances decaying to a neutral e{mu} final state in p{bar p} collisions at a center-of-mass energy of 1.96 TeV. Using a data sample representing 344 pb{sup -1} of integrated luminosity recorded by the CDF II experiment, we compare Standard Model predictions with the number of observed events for invariant masses between 50 and 800 GeV/c{sup 2}. Finding no significant excess (5 events observed vs. 7.7 {+-} 0.8 expected for M{sub e{mu}} > 100 GeV/c{sup 2}), we set limits on sneutrino and Z' masses as functions of lepton family number violating couplings.

Laser vibrometry is a technique used to detect vibrations on objects using the interference of coherent light with itself. Most vibrometry systems process only one target location at a time, but processing multiple locations simultaneously provides improved detection capabilities. Traditional laser vibrometry systems employ oversampling to sample the incoming modulated-light signal, however as the number of channels increases in these systems, certain issues arise such a higher computational cost, excessive heat, increased power requirements, and increased component cost. This thesis describes a novel approach to laser vibrometry that utilizes undersampling to control the undesirable issues associated with over-sampled systems. Undersampling allows for significantly less samples to represent the modulated-light signals, which offers several advantages in the overall system design. These advantages include an improvement in thermal efficiency, lower processing requirements, and a higher immunity to the relative intensity noise inherent in laser vibrometry applications. A unique feature of this implementation is the use of a parallel architecture to increase the overall system throughput. This parallelism is realized using a hierarchical multi-channel architecture based on off-the-shelf programmable logic devices (PLDs).

This research describes Fountain, a suite of programs used to monitor the resources of a cluster. A cluster is a collection of individual computers that are connected via a high speed communication network. They are traditionally used by users who desire more resources, such as processing power and memory, than any single computer can provide. A common drawback to effectively utilizing such a large-scale system is the management infrastructure, which often does not often scale well as the system grows. Large-scale parallel systems provide new research challenges in the area of systems software, the programs or tools that manage the system from boot-up to running a parallel job. The approach presented in this thesis utilizes a collection of separate components that communicate with each other to achieve a common goal. While systems software comprises a broad array of components, this thesis focuses on the design choices for a node monitoring component. We will describe Fountain, an implementation of the Scalable Systems Software (SSS) node monitor specification. It is targeted at aggregate node monitoring for clusters, focusing on both scalability and fault tolerance as its design goals. It leverages widely used technologies such as XML and HTTP to present an interface …

This study examined the effectiveness of training Head Start teachers and aides in child teacher relationship training (CTRT). CTRT is based on child parent relationship therapy (CPRT) (Landreth & Bratton, 2006), a filial therapy model based on the principles of child-centered play therapy, and was adapted for the classroom. In this quasi-experimental design, 12 teacher/aide pairs (n = 24) were assigned to the experimental (n = 12) or active control group (n = 12). Children who scored in the Borderline or Clinical range on at least one scale of the Child Behavior Checklist-Caregiver/Teacher Report Form (C-TRF) at pretest qualified for the study (n = 54). Nine hypotheses were analyzed using a two factor repeated measures multivariate analysis to determine if the CTRT group and the active control group performed differently across time according to pre-, mid-, and posttest results of the C-TRF. Additionally, effect sizes were calculated to determine practical significance. Five hypotheses were retained at the .05 level of significance. Post hoc analysis was conducted to analyze the effects of the two phases of treatment. Results indicated that children in the experimental group made statistically significant improvements in externalizing problems (p = .003). Children of focus made statistically significant …

This study looked at leadership development at top performing nuclear plants in the United States. The examination of leadership development as actually practiced in the nuclear energy industry lead to the development of a best practice model. The nuclear industry is self-regulated through the Institute for Nuclear Power Operations (INPO). INPO has been evaluating nuclear plants over the past 15 years. Recently they have identified supervisor performance as a key factor in poor plant performance. INPO created a model for leadership development called Growing Industry Leaders. The nuclear industry has identified its aging workforce and subsequent loss of leadership as an emerging issue facing the nuclear industry in the next five to ten years. This initiative was aimed at both the supervisor shortfalls identified through plant evaluations and the state of the workforce within the nuclear industry. This research evaluated the elements of this model and compared them to a model of best practice. This research answered the following questions: What elements of leadership development should be included in leadership development programs? What would a model of best practice in leadership development look like? Data was collected from nine out of 103 top performing plants. Development activities were categorized by …

Counter-productive workplace behavior (CWB) is defined as any intentional behavior on the part of an organization member viewed by the organization as contrary to its legitimate interests. A growing body of literature reveals that individual variables and pre-employment integrity tests can play a strong role in the prediction of CWB. The empirical literature has failed to clarify which type of individual level antecedents, or types of integrity test items, are more predictive of CWB. The current study evaluated data collected from restaurant employees (N=464) that measured items relating to personality tendencies, attitudes toward acceptance of counter-productive behaviors, work and high school background, and admissions of counter-productive behavior. A confirmatory factor analysis revealed a mediocre fit to a typology of CWB (interpersonal CWB vs. organizational CWB). Correlation analysis revealed that only specific attitudinal items and empirically keyed biodata items were significantly related to CWB. Hierarchical regression analysis found that attitudinal items paralleling admissions of CWB contributed variance beyond that of other personality and work and high school background antecedents.

This study addresses a tension in contemporary studies of public memory between ideology criticism and postmodern critique. Both strategies of reading public memory rely on a representational logic derived from the assumption that the source for comparison of a memory text occurs in a more fundamental text or event. Drawing heavily from Michel Foucault, the study proposes an alternative to a representational reading strategy based on the concepts of regularity, similitude, articulation, and cultural formation. The reading of Vietnam Veterans Memorial and the Galveston County Vietnam Memorial serves as an example of a non-representational regularity enabled by the cultural formation of pastoral power.