A three-dimensional finite-element elastic analysis is carried out for a thick-wall tube (as sued in typical LMFBR steam generators) that contains a surface flaw in the form of a paraboloid of revolution. Effects of the depth and aspect ratio of the flaw on the stress distribution and stress concentration in the tube are explored.

Dissertation discussing the results of experiments to study the behavior of superconductors under light illumination.

This paper provides an economic analysis of three noise abatement strategies designed to interrupt the path of noise between highways and residential areas, and makes some abatement policy suggestions.

A data-collection and advisory team was formed to investigate observations of power reactivity decrement (PRD) and reactivity loss rate (RLR) obtained during EBR-II reactor run 74, because both the PRD and RLR were judged to be high during that run. This report describes the efforts to develop a realistic model explaining the reactivity observations for run 74 and presents recommendations for additional diagnostic information in the event of a recurrence of off-normal behavior of reactivity.

During disassembly and subsequent visual examinations of X159 (a Mark A-19A type of subassembly containing mixed-oxide fuel), 11 of 19 shroud tubes were found fully or partially severed. Several of the capsules within their shroud tubes were distinctly kinked at axial locations near those at which the shroud tubes were severed. The examination also disclosed that the shroud-tube fractures occurred during reactor operations.

An optimization method, based on linear programming, has been developed which determines the enrichment distribution in a multizone reactor such that the desired power distribution is achieved at BOL, as well as the poison distribution during reactor operation such that the reactor is kept critical and the desired power distribution is retained. For the numerical implementation of the method, the CYPRUS code has been written. Results of the application of the method are presented and input specifications for the use of the code are described.

Tutorial description of the Warren machine with a basic introduction to the motivation of the machine and the instructions that define it. Discussion of the fairly limited extensions required to extend the machine for more general use outside of implementations of logic programming. Substantial speedups will occur due to improvements in the implementation of the basic algorithms.

Much work has been done in the study of two-phase gas-liquid flows. Although it has been recognized superficially that such flows are not homogeneous in general, little attention has been paid to the inherent discreteness of the two-phase systems. Only relatively recently have fluctuating characteristics of two-phase flows been studied in detail. As a result, new experimental devices and techniques have been developed for use in measuring quantities previously ignored. This report reviews and summarizes most of these methods in an effort to emphasize the importance of the fluctuating nature of these flows and as a guide to further research in this field.

The behavior of FTR-type, mixed-oxide, pre-irradiated, ''intermediate-power-structure'' fuel during a simulation of an FTR loss-of-flow accident was studied in the Mark-IIA integral TREAT loop. Analysis of the data reported here leads to a postulated scenario (sequence and timing) of events in the test. This scenario is presented, together with the calculated timing of events obtained by use of the SAS code.

The problem of calculating comprehensive sets of cross sections for ionization of atoms and molecules is reviewed. Emphasis is put on targets that are already ionized and lower-energy collisions for which the incident electron must be treated on a par with target electrons. The physical circumstances are discussed in which perturbation methods should be adequate, and special investigations are recommended to identify the relevant ranges of parameters more precisely and dependably. A new R-matrix approach is outlined which should permit rather simple, approximate, but dependable calculations when the perturbation methods fail.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes studies directed toward seeking alternative cathode materials to NiO for molten carbonate fuel cells.

Fluid excitation forces are measured in a water loop for two circular cylinders arranged in tandem and normal to flow. The Strouhal number and fluctuating drag and lift coefficients for both cylinders are presented for various spacings and incoming flow conditions. Results show the effects of Reynolds number, pitch ratio, and upstream turbulence on the fluid excitation forces.

This report summarizes the flow-induced vibration of circular cylinders in quiescent fluid, axial flow, and crossflow, and applications of the analytical methods and experimental data in design evaluation of various system components consisting of circular cylinders.

A set of macro libraries has been developed that allows programmers to write portable FORTRAN code for multiprocessors. This document presents, in tutorial form, the macros used to implement three common synchronization patterns: self-scheduling DO-loops, barrier synchronization, and the askfor monitor.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes activities seeking alternative cathode materials to NiO for molten carbonate fuel cells.

Cold-trap regeneration may be very important in future LMFBRs because of the expected high hydrogen source from the steam generators. This hydrogen precipitates as NaH in the cold trap and may fill the trap within one year of operation. Several methods of cold-trap regeneration were considered, but the simplest and least expensive appears to be decomposition of NaH under vacuum at elevated temperatures. Experiments were done to assess the feasibility of this method for cold-trap regeneration. Small-scale simulated cold traps (SCT) were loaded with NaH and NaH plus Na2O, and were heated both under vacuum and under a sweep gas at 100 kPa. The evolved hydrogen was converted to water by a CuO bed and collected in a weighing tube.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes efforts directed toward (1) developing alternative concepts for components of molten carbonate fuel cells and (2) improving understanding of component behavior.

The Physics Division's program in nuclear physics covers a broad span of activities within that discipline. The object of this research is to understand the properties of atomic nuclei, their structure, the mechanisms of nuclear reactions, and manifestations of fundamental symmetries in nuclei. Work is carried out under a variety of subprograms: theory, heavy-ion physics, medium-energy physics and nuclear research. These categories do not represent a sharp separation between people--individual scientists often work in several different areas. This flexibility allows scientific problems to be addressed with a variety of techniques, and it avoids limiting individual scientists' activities to a particular subdiscipline.

The research program in nuclear physics in the Physics Division spans a broad range of activities and contributes to many of the major questions in the discipline. Activities may be roughly divided into three broad categories. Research with the tandem-linac in heavy-ion physics is doing well, though laboring under severe budgetary constraints, and outside use of the facility has increased substantially. Progress on the construction of the full ATLAS facility is coming along expeditiously and it is expected to be completed on schedule in 1985. In medium-energy physics, activities are continuing at LAMPF, as well as other accelerators, though considerable effort was devoted this year to the preparation of a proposal for a national electron accelerator facility.

Quarterly report on the activities of the Argonne National Laboratory Materials Science Division regarding economical conversion of coal into clean and usable alternate fuels will be advanced through the use of durable materials systems. This program is designed to provide part of the materials information necessary for successful operation of coal-conversion systems.

This report describes the work done to further develop the infrared spectroscopic analytical method for the analysis of atmospheric aerosol particles, as well as some exploratory work on a new procedure for determining proton acidity in aerosol samples. Earlier work had led to the successful use of infrared (ir) spectrophotometry for the analysis of nitrate, ammonium, and neutral and acidic sulfates in aerosol samples collected by an impactor on a Mylar-film substrate. In this work, a filter-extraction method was developed to prepare filter-collected aerosol samples for ir analysis. A study was made comparing the ir analytical results on filter-collected samples with impactor-collected samples. Also, the infrared analytical technique was compared in field studies with light-scattering techniques for aerosol analysis. A highly sensitive instrument for aerosol analysis using attenuated total internal reflection (ATR) infrared spectroscopy was designed, built, and tested. This instrument provides a measurement sensitivity much greater (by a factor of 6 for SO4²⁻) than that obtainable using the KBr-pellet method. This instrument collects size- and time-resolved samples and is potentially capable of providing automated, near real-time aerosol analysis. Exploratory work on a novel approach to the determination of proton acidity in filter- or impactor-collected aerosol samples is also described. …

Given a mapping with a sparse Jacobian matrix, the problem of minimizing the number of function evaluations needed to estimate the Jacobian matrix by differences is investigated. This problem can be attacked as a graph coloring problem and this approach leads to very efficient algorithms. The behavior of these algorithms is studied and, in particular, it is proved that two of the algorithms are optimal for band graphs. Numerical evidence is presented which indicates that these two algorithms are nearly optimal on practical problems.

Report discussing a project to design, build, and test a latent heat storage device using cross-linked, high-density polyethylene (HDPE). This report provides an update on progress up to the point that the device is ready to test.

Fluid damping plays an important role for structures submerged in fluid, subjected to flow, or conveying fluid. This design guide presents a summary of calculational procedures and design data for fluid damping for circular cylinders vibrating in quiescent fluid, crossflow, and parallel flow.