A simple graphical method has been developed to undertake technical design trade-off studies for individual parabolic dish modules comprising a two-axis tracking parabolic dish with a cavity receiver and power conversion assembly at the focal point. The results of these technical studies can then be used in performing the techno-economic analyses required for determining appropriate subsystem sizing. Selected graphs that characterize the performance of subsystems within the module have been arranged in the form of a nomogram that would enable an investigator to carry out several design trade-off studies. Key performance parameters encompassed in the nomogram include receiver losses, intercept factor, engine rating, and engine efficiency. Design and operation parameters such as concentrator size, receiver type (open or windowed aperture), receiver aperture size, operating temperature of the receiver and engine, engine partial load characteristics, concentrator slope error, and the type of reflector surface, are also included in the graphical solution. Cost considerations are not included. The nomogram has been used to perform trade-off studies that have provided a basis for determining requirements for a single concentrator that could perform satisfactorily with either the selected Stirling or Brayton engine. This activity is summarized to illustrate the usage of the nomogram. Additionally, …

A new electric gun system was constructed for use in high-pressure EOS studies. The system is powered by a 100 kV, 15.6 ..mu..F capacitor bank. At 100 kV charging voltage the system inductance is 23 nH. This system has driven 0.3 mm-thick Kapton projectiles to > 20 km/s and 0.3 mm Kapton/30 ..mu..m Ta projectiles to approx. 10 km/s. Projectile velocity is modeled phenomenlogically by an electrical Gurney model.

The rates for a number of reactions producing certain stable nuclides, such as /sup 3/He and /sup 4/He, and fission in the moon are calculated for galactic-cosmic-ray particles and for solar protons. Solar-proton-induced reactions with bromine usually are not an important source of cosmogenic Kr isotopes. The /sup 130/Ba(n,p) reaction cannot account for the undercalculation of /sup 130/Xe production rates. Calculated production rates of /sup 15/N, /sup 13/C, and /sup 2/H agree fairly well with rates inferred from measured excesses of these isotopes in samples with long exposure ages. Cosmic-ray-induced fission of U and Th can produce significant amounts of fission tracks and of /sup 86/Kr, /sup 134/Xe, and /sup 136/Xe, especially in samples with long exposures to cosmic-ray particles.

This report presents research results in the areas of industrial hygiene, radiation protection, fire safety, and instrument development. Items have been individually abstracted. (ACR)

The Lawrence Livermore Laboratory is currently constructing a new linear induction accelerator with a higher beam current than the Astron accelerator. The new accelerator, called the Experimental Test Accelerator (ETA) will be a 5-MeV, 10-kA accelerator with a pulse width of 50-ns. Like the Astron, the principle of magnetic induction is used to obtain a linear accelerator. The modular accelerating cavities form essentially a 1:1 transformer and the change in flux in the ferrite core induces an axial electric field for the acceleration of electrons. Since the total energy storage for the ETA is much greater than the requirement for Astron, the power system, the capacitor bank and the modulator charging system all had to be modified to provide an overall regulation of .1%. This strict regulation of the charging voltage is necessary for pulse-to-pulse repeatability.

The Electrochemical Technology Program at Argonne National Laboratory (ANL) provides technical and programmatic support to DOE's Electric and Hybrid Propulsion Division (DOE-EHP). The goal of DOE-EHP is to advance promising electric-vehicle (EV) propulsion technologies to levels where industry will continue their commercial development and thereby significantly reduce air pollution and petroleum consumption due to the transportation sector of the economy. In support of this goal, ANL provides research, development, testing/evaluation, post-test analysis, modeling, and project management on advanced battery technologies for DOE-EHP. This report summarizes the battery-related activities undertaken during the period of January 1, 1993 through March 31, 1993. In this report, the objective, background, technical progress, and status are described for each task. The work is organized into the following task areas: 1.0 Project Management; 2.0 Sodium/Metal Chloride R D; 3.0 Microreference Electrodes for Lithium/Polymer Batteries.

The method is based on counting the 186-keV gamma rays emitted by /sup 235/U using a Pb-collimated Ge(Li) detector. Measurements of fifty UF/sub 6/ product and feed cylinders reveal the following precisions and counting times: Product - 2S, 0.98% (600 s); Feed - 2S, 0.48% (2500 s); Product - 1S, 0.62% (1000 s); Feed - 1S, 0.73% (3000 s). A 1% precision is desired for variables - attributes verification measurements of /sup 235/U assay in UF/sub 6/ sample cylinders for safeguards inspections by the International Atomic Energy Agency (IAEA). Statistically, these measurements stand between fine, high-precision (or variables) measurements and gross, low-precision (or attributes) ones. Because of their intermediate precisions, the variables-attributes measurements may not require analysis of all samples, and this could result in significant savings of IAEA inspector time. Although the precision of the above results is satisfactory, the average relative differences between gamma-ray and mass-spectrometric determinations for the last two sets of measurements (1S cylinders) have positive biases.

This progress report discusses activities for the P Division for the month of May 1949. The nominal operating level for both B and F Piles was 275 megawatts (MW) throughout the month except for outages listed under Area Activities. The D Pile operated at 275 MW until May 23 when the nominal level was raised to 290 MW in the first step of the program covered in Production Test No. 105-260-P to evaluate the feasibility of operating piles at higher power levels. A total of 44 tons of metal, at an average concentration of 285 megawatt days/ton (MWD/ton), was discharged from the piles during the month. Considerable difficulty was experienced during the month with stuck tubes containing Class IV (alpha-rolled, triple-dipped, randomly transformed) metal. A total of nine tubes with concentrations in the range of 320--370 MV/ton was encountered. As a result of these difficulties with the Class IV material, future discharges of this type metal will be limited to concentrations in the range 300--320 MWD. Approximately one ton of Class V (alpha-rolled, triple-dipped, completely transformed) metal was discharged at a concentration of 368 MV/ton for test purposes. Inspection of this material indicated that all the slugs were in satisfactory …

This report details activities of the Irradiation Processing Department during the month of May 1964.

The baseline risk assessment [WSRC91] has demonstrated that the hazard at PAR Pond is solely from external exposure to Cs-137, a gamma emitting radionuclide. Between 1954 and 1964, approximately 222 curies of radioactive cesium (Cs-134 and Cs-137) were released to the Lower Three Runs Creek system from R Reactor [Ma9l]. These releases were associated with leaking fuel and target slugs in the reactor disassembly basin. Independent studies show that approximately 45 curies of Cs-137 (half-life of 30 years) still resides in the sediments of PAR Pond [Wh9l; Wi9l]; Cs-134 has a relatively short half-life (2 years) and has decayed to insignificant quantities since it was released.

A low-temperature (750{degrees}C) process to produce aluminum, employing dimensionally-stable electrodes, was investigated under this contract. Tests were carried out at a 10-ampere scale to develop a nonconsumable anode and to evaluate certain cell operating parameters. The work was carried out in conjunction with a NSF SBIR research grant to study the fundamental science aspects of the process. A scaled up 300-ampere cell was built and a preliminary test run was made with encouraging results. The new technology has the promise of producing aluminum at 5.0 kWh/lb as compared to the US average of about 7.5 kWh/lb, and to produce it at lower cost. Preliminary technical discussions have been held with a major US aluminum company under secrecy agreement for eventual licensing.

This report details benefits of an increase in the flow of water from the lower depths of Grand Coulee Reservoir which used to lower river temperatures at HAPO. A net average daily reduction of over 1.7{degree}C resulted at HAPO. The peak reduction was over 4.0{degree}C. The net production gain from temperature change was 13,350 MWD. The cost of control was: Grand Coulee Charges (Estimated) $37,000, and other 3,500, for a total of $40,500.

The power of some SRP fuel assemblies is limited by the burnout safety factor (BOSF) in some applications. This power limitation is unnecessarily restrictive, because the current conservatism in predicting film boiling burnout is unusually large compared to that in predicting unstable flow in fuel assemblies. In the past, most SRP fuel assemblies operated at the flow instability limit and were far enough removed from burnout that a convenient and very conservative burnout limit system could be used. If the same degree of safety was used for both burnout and flow instability, the power of BOSF-limited assemblies could be increased. This memorandum, which is part of the program to improve the system for protection against burnout, evaluates the probability and consequences of burnout at various BOSF levels.

This is the monthly report for the Hanford Laboratories Operation, May 1958. Reactor fuels, chemistry, dosimetry, separation processes, reactor technology, financial activities, biology operation, physics and instrumentation research, employee relations, operations research and synthesis operation, programming, radiation protection, and laboratory auxiliaries operation area discussed.

To quantify the potential for {sup 129}I to migrate from buried waste at the Savannah River Plant (SRP) burial ground, a four year study was made. Spent berl saddles containing 68.7 mCi of {sup 129}I from separations process air filters were buried in a 10 ft. {times} 10 ft. {times} 12 ft. deep lysimeter exposed to normal weather conditions at the burial ground. During the four year study leaching and migration released 48.5 nCi of {sup 129}I from the 68.7 mCi buried in the lysimeter. This represents an average 1.77 {times} 10{sup {minus}7} fraction/year released. The release rate was relatively constant during the four years, varying mainly with seasonal rainfall. Calculations based on these results indicate a release of <3 {mu}Ci/year of {sup 129}I from SRP buried waste to the groundwater. Qualitatively this release and subsequent migration has recently been confirmed by measurement of 0.25 pCi {sup 129}I /1 in water from a well 600{prime} southwest of the burial ground.

A series of three experimental tests was conducted on the operation and adequacy of the K-Reactors` third, or last-ditch, cooling system. The first test showed considerable line corrosion the second test was performed directly after line cleaning, and the third test showed a significant amount of additional line corrosion after only nine months of service. The present cooling adequacy of this last-ditch system at the KE and KW reactors is summarized these show the power levels for which we have adequate last-ditch cooling as a function of the crosstie coolant temperature. These figures include the effects of increasing the number of pumps that remain in operation at the other K-Reactor, and various other operating or emergency conditions. These curves are for diesel pump speeds of 750 rpm which are planned for June of this year. In these figures the crosstie temperature is assumed to be a conservative 5{degrees}C above the process water inlet temperature.

This is the monthly report for the Hanford Laboratories Operation, May, 1959. Reactor fuels, chemistry, dosimetry, separation processes, reactor technology, financial activities, biology operation, physics and instrumentation research, employee relations, operations research and synthesis operation, programming, radiation protection, and laboratory auxiliaries operation area discussed.

The cap-spire pulsing technique of preheating the cap-spire portion of the fuel assembly does significantly improve the brazing of the cap-spire assembly. The air pocket at the spire wafer junction is fully removed. The cap side wafer is essentially 100% wetted with brazing alloy. Destructive tests show that a 4 to 1 improvement in most quality measurements is achieved over present cap preheating techniques, without using additional cleaning step of spire etching. The pulsing is accomplished by a cammed drive system, using a stroke of three-fourths of an inch with a spring return. The system is driven by an electrical gear reduction motor at a rate of 1.4 pulses per second. A preheating cycle of 21 {plus_minus} 2 seconds is used for the current I&E cap designs. The cap-spire assembly does not require any special treatment other than the normal chemical cleaning.

Research continued on relative biological effectiveness, in the following areas: radial distribution of dose about the path of an energetic heavy ion; the response of E. Coli mutants to ionizing radiations; the application of a fragmentation model to to the calculation of cell survival and mutation with heavy ion beams; biological radiation effects from gamma radiation and heavy ion beams on organisms; cancer induction in the Harderian Gland by HZE particles; and effects of low dose radiations. (CBS)

The task to evaluate saltstone properties associated with performance criteria as a function of extended exposure to temperatures typical of adiabatic curing is described in this document and involves extension of previous qualification studies for DWPF Saltstone formulations.

This report discusses the following topics; establishment and growth of the laboratories and the struggle for Livermore; technology and weapons development; and challenges to unbridled technological development--the laboratories and arms control.

The radiological, fire and electrical hazards posed by a 200 MeV electron Linear Accelerator, which the NSLS Department will install and commission within a newly assembled structure, are addressed in this Preliminary Safety Analysis Report. Although it is clear that this accelerator is intended to be the injector for a future experimental facility, we address only the Linac in the present PSAR since neither the final design nor the operating characteristics of the experimental facility are known at the present time. The fire detection and control system to be installed in the building is judged to be completely adequate in terms of the marginal hazard presented - no combustible materials other than the usual cabling associated with such a facility have been identified. Likewise, electrical hazards associated with power supplies for the beam transport magnets and accelerator components such as the accelerator klystrons and electron gun are classified as marginal in terms of potential personnel injury, cost of equipment lost, program downtime and public impact perceptions as defined in the BNL Environmental Safety and Health Manual and the probability of occurrence is deemed to be remote. No unusual features have been identified for the power supplies or electrical distribution system, …

Liquids derived from coal contain relatively high amounts of oxygenated organic compounds, mainly in the form of phenols and furans that are deleterious to the stability and quality of these liquids as fuels. Hydrodeoxygenation (HDO) using Mo/W sulfide catalysts is a promising method to accomplish this removal, but our understanding of the reactions occurring on the catalyst surface during HDO is very limited. Rather than attempting to examine the complexities of real liquids and catalysts we have adopted an approach here using model systems amenable to surface-sensitive techniques that enable us to probe in detail the fundamental processes occurring during HDO at the surfaces of well-defined model catalysts. The results of this work may lead to the development of more efficient, selective and stable catalysts. Above a S/Mo ratio of about 0.5 ML, furan does not adsorb on sulfided Mo surfaces; as the sulfur coverage is lowered increasing amounts of furan can be adsorbed. Temperature-programmed reaction spectroscopy (TPRS) reveals that C-H, C-C and C-O bond scission occurs on these surfaces. Auger spectra show characteristic changes in the nature and amount of surface carbon. Comparisons with experiments carried out with CO, H{sub 2} and alkenes show that reaction pathways include -- …

A comparison study was made between a quartz tube non-porous packed bed reactor and a 40 Angstrom pore size porous VYCOR membrane reactor using two different methane coupling catalysts. Comparisons of reactor performance of the two reactors were made on the basis of amount of methane converted, C{sub 2} selectivities and the total C{sub 2} yields. Identical flow and temperature conditions were maintained for the two reactor systems for this study. These studies appear to indicate that improved performance can be obtained in VYCOR membrane reactors. The product stream from the tube side effluent of the porous VYCOR membrane reactor was superior to that from the quartz tube non-porous reactor in terms of improved C{sub 2} selectivity. At the present stage of research, the total effluent from the membrane reactor compared slightly less favorably to the effluent from a non-porous reactor, but studies are continuing on devising a reactor configuration which increases methane throughput in the tube side of the membrane reactor which is expected to demonstrate the overall superiority of the membrane reactor. Simulation results obtained by doing a parameter study for different reactor systems showed that, for the methane coupling reaction, where the desired product formation had a …