Development of a steam separator the Pathfinder Reactor is reported. A full-scale separator model was developed through the combination of scale-model testing and the application of principles associated with the existing theory of centrifugal separation. This model was put through full-scale air-water tests which led to modifications and a final design which meets Pathfinder requirements. Design data are included for the reactor and the steam separator. (J.R.D.)

None

Knowledge of volatile concentrations in magmas are important in the prediction of explosive volcanism, and contribute to the understanding of the carbon dioxide budget of the atmosphere. Some important variables that are controlled by volatiles are: crystallization temperature of phases, composition of liquids minimum, and viscosity. Volatiles are also catalysts for reactions.

The following are included in the well test plan: well test program schedule and order of work; the injection well drilling program details; the production well drilling program details; and long-term (30-day) production testing program details. (MHR)

The water-moderated core used for destructive experiments is mounted in the Spent I open-type reactor vessel, which has no provision for pressurization or forced coolant flow. The core is an array of highly enriched aluminum clad, plate-type fuel assemblies, using four bladetype, gang-operated control rods. Reactor transients are initiated at ambient temperature by step-insentions of reactivity, using a control rod which can be quickly ejected from the core. Following an initial series of static measurements to determine the basic- reactor properties of the test core, a series of nondestructive, self-limiting power excursion tests was performed, which covered a reactor period range down to the point where minor fuel plate damage first occurred -approximately for a 10- msec period test. These tests provided power, temperature, and pressure data. Additional kinetic teste in the period region between 10 and 5 msec were completed to explore the region of limited core damage. Fuel plate damage results included plate distortion, cladding cracking, and fuel melting. These exploratory tests were valuable in revealing unexpected changes in the dependence of pressure, temperature, burst energy, and burst shape parameters on reactor period, although the dependence of peak power on reactor period was not significantly changed. An evaluation …

A study was made to determine whether secondary iso tope effects also occur in molecular structure. Electron diffraction studies were carried out on ethane and deuteroethane. In C/sub 2/H/sub 6/ the mean C-C and C-H bond lengths found agreed very closely with values determined for other paraffin hydrocarbons, and the C--H bond showed a normal primary isotope effect (~ 0.005 A) similar to that found in methane when H is replaced by O. The output of the leastsquares analysis suggested that the mean C-- C bond length in C/sub 2/D/sub 6/ is shorter than in C/sub 2/H/sub 6/ and by about 0.004 A. Th e decrease seemed to be real for the apparent uncertainty was not much greater than 0.001 A. (M.C.G.)

The basic goal of the Limestone Injection Multistage Burner (LIMB) demonstration is to extend LIMB technology development to a full- scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (a) reductions of 50 percent or greater in SO{sub x} and NO{sub x} emissions can be achieved at a fraction of the cost of add-on FGD systems, (b) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit, and (c) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater.

A multiple-reflection optical cell for Raman or fluorescence gas analysis consists of two spherical mirrors positioned transverse to a multiple-pass laser cell in a confronting plane-parallel alignment. The two mirrors are of equal diameter but possess different radii of curvature. The spacing between the mirrors is uniform and less than half of the radius of curvature of either mirror. The mirror of greater curvature possesses a small circular portal in its center which is the effective point source for conventional Fl double lens collection optics of a monochromator-detection system. Gas to be analyzed is flowed into the cell and irradiated by a multiply-reflected composite laser beam centered between the mirrors of the cell. Raman or fluorescence radiation originating from a large volume within the cell is: (1) collected via multiple reflections with the cell mirrors; (2) partially collimated; and (3) directed through the cell portal in a geometric array compatible with Fl collection optics.

A feasibility study has been completed to decontaminate the primary system of the Dresden-1 Nuclear Power Unit operated by Commonwealth Edison Company of Illinois. Available data initially were searched to determine the state of the art. Solvents based on organic acids and chelates gave unsatisfactory deontamination factors or unacceptable corrosion rates when evaluated for cleaning of specimens from the Dresden-1 primary system, under static and dynamic conditions. A new proprietary cleaning solution, Dow Solvent NS-1, was successfully applied in these laboratory studies.

This report summarizes the mechanical, structural, and hydrodynamic design of the Intermediate-Size Inducer Pump (ISIP). The design was performed under Atomics International's DOE Base Technology Program by the Atomics International and Rocketdyne Divisions of Rockwell International. The pump was designed to utilize the FFTF prototype pump frame as a test vehicle to test the inducer, impeller, and diffuser plus necessary adapter hardware under simulated Large Scale Liquid Metal Fast Breeder Reactor service conditions. The report describes the design requirements including the purpose and objectives, and discusses those design efforts and considerations made to meet the requirements. Included in the report are appendices showing calculative methods and results. Also included are overall assembly and layout drawings plus some details used as illustrations for discussion of the design results and the results of water tests performed on a model of the inducer.

Appendices are presented which contain information concerning the decontamination of Dresden-1; consultant's opinions; proceedings of the American Power Conference, Volume 37, 1975; health physics reports; toxicological properties and industrial handling hazards of Dow solvent NS-1; and expected radiation dose rates in the new Dresden station radioactive waste processing building.

Work to develop the theory controlling the electroplating of a compound semiconductor on a transparent, conductive substrate and to demonstrate operative solar cells using the approach is reported. The current program is divided essentially into three paralleled team efforts. The first effort centers on refining the electroplating process at Monosolar so thicker and more uniform layers of p- or n-type cadmium telluride can be plated on both In/sub 2/O/sub 3/:Sn- and Ni- coated substrates. 1 ..mu..M thick polycrystalline films have been achieved for the first time ever without peeling problems, a thickness optimum for maximum solar absorption and economy of materials. Second, work is underway at UCLA to physically and electrically characterize the films and diodes made from them. Under proper conditions Schottky diodes with better than 10/sup 4/ rectification ratios at 1.5 V were obtained along with preliminary indications of grain sizes up to 1 ..mu..M. Measurements of these diodes revealed the presence of deep trapping level(s) that may be associated with plating process impurities that since may have been eliminated. Third, work so far on developing improved techniques for depositing ITO has been successful at UCLA in their effort to eliminate persistent problems with ITO obtained from outside …

A low-temperature (750{degrees}C) process to produce aluminum, employing dimensionally-stable electrodes, was investigated under this contract. Tests were carried out at a 10-ampere scale to develop a nonconsumable anode and to evaluate certain cell operating parameters. The work was carried out in conjunction with a NSF SBIR research grant to study the fundamental science aspects of the process. A scaled up 300-ampere cell was built and a preliminary test run was made with encouraging results. The new technology has the promise of producing aluminum at 5.0 kWh/lb as compared to the US average of about 7.5 kWh/lb, and to produce it at lower cost. Preliminary technical discussions have been held with a major US aluminum company under secrecy agreement for eventual licensing.

In neutron dosimetry, calculations enable one to predict the response of a proposed dosimeter before effort is expended to design and fabricate the neutron instrument or dosimeter. The nature of these calculations requires the use of computer programs that implement mathematical models representing the transport of radiation through attenuating media. Numerical, and in some cases analytical, solutions of these models can be obtained by one of several calculational techniques. All of these techniques are either approximate solutions to the well-known Boltzmann equation or are based on kernels obtained from solutions to the equation. The Boltzmann equation is a precise mathematical description of neutron behavior in terms of position, energy, direction, and time. The solution of the transport equation represents the average value of the particle flux density. Integral forms of the transport equation are generally regarded as the formal basis for the Monte Carlo method, the results of which can in principle be made to approach the exact solution. This paper focuses on the Monte Carlo technique.

These appendices to the Near Term Hybrid Vehicle Trade-off Studies reports present data on the SPEC-78 computer model for simulating vehicle performance, fuel economy, and exhaust emissions; propulsion system alternatives; lead-acid and sodium-sulfur batteries; and production cost estimates. (LCL)

>The plant was operated from Feb. l959 until Jan. 3, 1961 when a nuclear excursion rendered the plant inoperable, A summary of operations is presented for the period Feb. 1960 until the incident. Plant operational tinwe during the period was 78% of that available. Satisfactory operation of conventional plant equipment was observed during 196 startups and scrams. An inspection of fuel assemblies after 700 Mwd showed no damage except to the B-Al strips attached to these assemblies. A greater than predieted gain in core reactivity was attributed to boron loss. Control rod sticking occurred 53 times ln 2,730 cases of operation. Test results on a PL-type condenser showed that its performance meets design rating. Steam quality remained greater than 99% for power levels up to 4.7 Mw(t) and radiation in the main steam system continued to be satisfactorily low. Waste handling requirements were increased but posed no problem. (J.R.D.)

A total of 661 animals was exposed to sharp''-rising overpressures of 3 to 4 msec duration using a shock tube of novel design which produced a pressure pulse similar to that obtained with high explosives. The reflected shock overpressures associated with 50% lethality were 29.0, rabbit, respectively. Other observations included the time of death in mortally wounded animals and gross pathological lesions likely to contribute to mortality. Selected data from the literature bearing upon the influence of overpressure and pulse duration on lethality were reviewed. These included pulse durations ranging from less than 1 msec to 8 sec. The critical pulse duration, that duration shorter than which the overpressures required for mortality increases sharply, was noted to depend upon animal size and to be of the order of many hundreds of microseconds to very few milliseconds for smaller'' animals and a few to many tens of milliseconds for larger'' animals. (auth)

The Sunkist Citrus Plant in Ontario, California, processes about 6 million pounds of citrus fruit per day to make products which include frozen concentrated juice; chilled, pasteurized, natural strength juice; molasses from peel; dried meal from peel; pectin; citrus oil; and bioflavonoids. The energy intensive operations at the plant include concentration, drying, and refrigeration. The objective of the two-year two-phase project is to identify an economically viable alternative to the existing method of meeting energy requirements. Progress on the technical work of Phase I is reported. The following are summarized: requirements (energy price projection, atmospheric emission requirements, citrus juice quality constraints, economic evaluations); characterization (basic citrus processing operations, energy consumption and fruit processed vs time, identification and measurement of energy uses, energy balance for a typical citrus juice evaporator); and thermodynamic analysis (heat pump model, thermal evaporator, and co-generation model).

Information is presented concerning corrosion studies on steels.

The use of a biphase turbine system to recover waste heat from diesel engines was examined and found to have many favorable attributes. Among these were low rpm, high torque, low heat exchanger cost, and simplicity. Several candidate working fluid combinations were tested at temperatures of interest. The contact heat exchanger concept was substantiated by large scale experiment. The program includes subscale tests of key hardware components of a biphase turbine bottoming system. These are the two-phase nozzle, two-phase turbine, and direct contact heat exchanger. A comprehensive cost analysis was completed. A three-year program leading to a full-size system field demonstration has been planned. Progress in the first year of this program and the effort started on the second year program are reported.

A 15-kilowatt, continuous-wave carbon dioxide laser was contracted to make partial-penetration welds in 6.35-and 12.7-mm-thick wrought depleted uranium plates. Welding power and speed ranged from 2.3 to 12.9 kilowatts and from 21 to 127 millimeters per second, respectively. Results show that depth-to-width ratios of at least unity are feasible. The overall characteristics of the process indicate it can produce welds resembling those made by the electron-beam welding process.

We have investigated the role of an isomeric state and its coupling to the ground state (g.s.) via photons and neutron inelastic scattering in a stellar environment by making detailed photonuclear and neutron cross-section calculations for /sup 176/Lu and /sup 210/Bi. In the case of /sup 176/Lu, the g.s. would function as an excellent galactic slow- (s-) process chronometer were it not for the 3.7-h isomer at 123 keV. Our calculations predicted much larger photon cross sections for production of the isomer, as well as a lower threshold, than had been assumed based on earlier measurements. These two factors combine to indicate that an enormous correction, a factor of 10/sup 7/, must be applied to shorten the current estimate of the half-life against photoexcitation of /sup 176/Lu as a function of temperature. This severely limits the use of /sup 176/Lu as a stellar chronometer and indicates a significantly lower temperature at which the two states reach thermal equilibrium. For /sup 210/Bi, our preliminary calculations of the production and destruction of the 3 /times/ 10/sup 6/ y isomeric state by neutrons and photons suggest that the /sup 210/Bi isomer may not be destroyed by photons as rapidly as assumed in certain …

The potential hazard to man arising from the hypothetical release of radioactive spent fuel waste into various water systems has been evaluated. Radionuclide transport and human exposure were simulated for six water systems: a large Northwestern river, a small Northeastern river, a small Northwestern river, a large Central Region river, a lake with no outflow in an arid region, and an aquifer discharging directly into an ocean.

The failure mode analysis for any cryogenic system includes the effects of a large liquid spill due to vessel rupture or overfilling. The Oxygen Deficiency Hazard (ODH) analysis for this event is a strong function of the estimated heat flux entering the spilled liquid. A common method for estimating the heat flux is to treat the surface on which the liquid spills as a semi-infinite solid. This note addresses the effect of linearizing the temperature profile in this form of analysis, and shows it to cause the calculated flux to be underestimated by more than a factor of two. 3 refs., 2 figs.