This report describes the current state of the utility subroutine package used with codes being developed by the staff of the Applied Physics Division. The package provides a variety of useful functions for BCD input processing, dynamic core-storage allocation and management, binary I/O and data manipulation. The routines were written to conform to coding standards which facilitate the exchange of programs between different computers.

Report issued by the Argonne National Laboratory discussing progress made by the Reactor Development Program during March 1963. Reactor physics, experiments, and safety studies are presented. This report includes tables, and illustrations.

In the gelcasting process, a slurry of ceramic powder in a solution of organic monomers is cast in a mold. The process is different from injection molding in that it separates mold-filling from setting during conversion of the ceramic slurry to a formed green part. In this work, NMR spectroscopy and imaging have been conducted for in-situ monitoring of the gelation process and for mapping the polymerization. ¹H nuclear magnetic resonance spectra have been obtained during polymerization of a premix of soluble reactive methacrylamide (monomer) and N, N'-methylene bisacrylamide (cross-linking molecules). The premix was polymerized by adding ammonium persulfate (initiator) and tetramethyl-ethylene-diamine (accelerator) to form long-chain, cross-linked polymers. The time-varying spin-lattice relaxation times T₁ during polymerization have been studied at 25 and 35 C, and the variation of spectra and T₁ with respect to extent of polymerization has been determined. To verify homogeneous polymerization, multidimensional NMR imaging was utilized for in-situ monitoring of the process. The intensities from the images are modeled and the correspondence shows a direct extraction of T₁ data from the images.

Vapor explosions were produced by injecting small quantities of water into a container filled with molten sodium chloride. Minimum explosion efficiencies, as evaluated from reaction-impulse measurements, were relatively large. Subsurface movies showed that the explosions resulted from a two-step sequence: an initial bulk-mixing phase in which the two liquids intermix on a large scale, but remain locally separated by an insulating gas-vapor layer; and a second step, immediately following breakdown of the gas layer, during which the two liquids locally fragment, intermix, and pressurize very rapidly. The experimental results were compared with various mechanistic models that had been proposed to explain vapor explosions. Early models seemed inconsistent with the results. More recent theories suggest that vapor explosions may be caused by a nucleation limit or by dynamic mixing combined with high surface-heat-transfer rates. Both types of models are consistent with the results.

Report issued by the Argonne National Laboratory discussing acoustic-boiling-detection techniques. As stated in the abstract, "this report summarizes literature through June 1967 concerning acoustic methods. In the acoustic method for boiling detection, either acoustic waveguides or high-temperature acoustic sensors are recommended" (p. 1). This report includes tables, and illustrations.

The DOE-1 computer program under development by Argonne National Laboratory, Lawrence Berkeley Laboratory, and Los Alamos Scientific Laboratory is used to examine energy consumption in a typical middle-class household in Cincinnati, Ohio. The program is used to compare energy consumption under different structural and environmental conditions including various levels of insulation in the walls and ceiling, double and single glazing of windows, and thermostat setback schedules.

During the past decade, synchrotron radiation emitted by circulating electron beams has come into wide use as a powerful, versatile source of x-rays for probing the structure of matter and for studying various physical processes. Several synchrotron radiation facilities with different designs and characteristics are now in regular operation throughout the world, with recent additions in this country being the 0.8-GeV and 2.5-GeV rings of NSLS at Brookhaven National Laboratory. However, none of the operating facilities has been designed to use a low-emittance, high-energy stored beam, together with modern undulator devices, to produce a large number of hard x-ray beams of extremely high brilliance. This document is a proposal to the Department of Energy to construct and operate high-energy synchrotron radiation facility at Argonne National Laboratory. We have now chosen to set the design energy of this facility at 7.0 GeV, with the capability to operate at up to 7.5 GeV.

Report on the environmental impact of Argonne National Laboratory.

This report discusses the results of the environmental monitoring program at Argonne National Laboratory (ANL) for 1989. To evaluate the effects of ANL operations on the environment, samples of environmental media collected on the site, at the site boundary, and off the ANL site were analyzed and compared. A variety of radionuclides were measured in air, surface water, groundwater, soil, grass, bottom sediment, and milk samples.

The Community Systems Program is concerned with conserving energy and scarce fuels through new methods of satisfying the energy needs of American communities. These programs are designed to develop innovative ways of combining current, emerging, and advanced technologies into Integrated Community Energy Systems (ICES) that could furnish any, or all, of the energy-using services of a community. The key goals of the Community System Program then, are to identify, evaluate, develop, demonstrate, and deploy energy systems and community designs that will optimally meet the needs of various communities. Integrated systems offer considerable potential for fuel substitution, thereby allowing the use of non-scarce fuel resources that would not be economically usable in smaller unintegrated systems. Input energy sources for such systems may include low-grade waste heat, solid and liquid wastes, solar and geothermal heat, seawater heat dissipation, and use of less-scarce fuels, such as coal and biomass. A Grid-Connected ICES uses a central co-generation plant and distribution system to provide heating, cooling, and electrical energy services. During 1977, contracts for the following Grid-Connected ICES (G-C ICES) demonstration teams were negotiated: City of Independence, Missouri; Clark University; City of Trenton, New Jersey; Health Education Authority of Louisiana (HEAL); and University of Minnesota. …

Many of Argonne National Laboratory`s (ANL`s) scientific staff members were very active in R & D work related to accelerator-based spoliation sources in the 1970s and early 1980s. In 1984, the Seitz/Eastman Panel of the National Academy of Sciences reviewed U.S. materials science research facilities. One of the recommendations of this panel was that the United States build a reactor-based steady-state source, the Advanced Neutron Source (ANS), at Oak Ridge National Laboratory. Subsequently, R & D activities related to the design of an accelerator-based source assumed a lower priority. The resumption of pulsed-source studies in this country started simultaneously with design activities in Europe aimed at the European Spallation Source (ESS). The European Community funded a workshop in September 1991 to define the parameters of the ESS. Participants in this workshop included both accelerator builders and neutron source users. A consortium of European countries has proposed to build a 5-MW pulsed source, and a feasibility study is currently under way. Soon after the birth of the ESS, a small group at ANL set about bringing themselves up to date on pulsed-source information since 1984 and studied the feasibility of upgrading ANL`s Intense Pulsed Neutron Source (IPNS) to 1 MW by …

Report issued by the Argonne National Laboratory discussing meteorological data collected between 1952 and 1953. Wind, temperature, pressure, and precipitation studies are presented. This report includes tables, illustrations, and a map.

Highlights of the Chemical Engineering (CEN) Division's activities during 1981 are presented. In this period, CEN conducted research and development in the following areas: rechargeable lithium-alloy/iron sulfide batteries for electric vehicles and other applications, aqueous batteries--improved lead-acid, nickel/zinc, and nickel/iron--for electric vehicles, as well as advanced lead-acid batteries for electric.-utility load leveling, energy-efficient industrial electrochemical processes, molten carbonate fuel cells for use by electric utilities, coal technology, mainly fluidized-bed combustion of coal in the presence of an SO2 sorbent of limestone, heat- and seed-recovery technology for open-cycle magnetohydrodynamic systems.

Current status of epidemiological studies of the late effects of internal radium in humans, and mechanistic investigations of those effects.

Report issued by the Argonne National Laboratory covering the quarterly report from the Reactor Engineering Division. A summary of reactor programs, designs, development, and experiments are presented. This report includes tables, illustrations, and photographs.

A summary for 1979 of Argonne National Laboratory's program on the development of advanced batteries is presented. These batteries are being developed for electric-vehicle propulsion and stationary energy-storage applications. The principal cells under investigation at present are of a vertically oriented, prismatic design with one or more inner positive electrodes of FeS or FeS2, facing negative electrodes of Li-Al alloy, and molten LiCl-KCl electrolyte; the cell operating temperature is 400 to 500 degrees C. A small effort on the development of a calcium/metal sulfide cell is also being conducted.

Annual report of the Argonne National Laboratory Chemical Technology Division (CMT) discussing the group's activities during 1992. These included electrochemical technology; fossil fuel research; hazardous waste research; nuclear waste programs; separation science and technology; integral fast reactor pyrochemical processes; actinide recovery; applied physical chemistry; basic chemistry research; and analytical chemistry.

Recommended criteria are given for the performance of Advanced Photon Source (APS), taking into consideration undulator tunability criteria and their relationship to the storage ring energy and undulator gap, length of straight sections.

Because dynamic instability is not acceptable for any commercial maglev systems, it is important to consider this phenomenon in the development of all maglev systems. This study considers the stability of maglev systems based on experimental data, scoping calculations, and simple mathematical models. Divergence and flutter are obtained for coupled vibration of a three-degree-of-freedom maglev vehicle on a guideway consisting of double L-shaped aluminum segments attached to a rotating wheel. The theory and analysis developed in this study identifies basic stability characteristics and future research needs of maglev systems.

This report summarizes the research performed on Maglev vehicle dynamic stability at Argonne National Laboratory during the past few years. It also documents magnetic-force data obtained from both measurements and calculations. Because dynamic instability is not acceptable for any commercial Maglev system, it is important to consider this phenomenon in the development of all Maglev systems. This report presents dynamic stability experiments on Maglev systems and compares their numerical simulation with predictions calculated by a nonlinear dynamic computer code. Instabilities of an electrodynamic system (EDS)-type vehicle model were obtained from both experimental observations and computer simulations for a five-degree-of-freedom Maglev vehicle moving on a guideway consisting of double L-shaped aluminum segments attached to a rotating wheel. The experimental and theoretical analyses developed in this study identify basic stability characteristics and future research needs of Maglev systems.

From Abstract: "An alternative approach is presented with attempts to demonstrate that insight may be gained from a consideration that the basic cause of the effect may be due to reactivity rather than to period as the previous authors assumed. Methods for compensating for this effect are discussed."

A data bank of field experiences with heat exchanger tube vibration reveals numerous cases of tube failures at, or near, the baffle. The objective of this study is to provide qualitative impact/fretting wear information for heat exchanger tubes through the performance of a series of tests involving the pertinent parameters: impact force level, between the tube and its support; tube to support plate hole clearance; tube support plate thickness; and tube vibration frequency. The characteristics of impact/fretting wear relative to tube motion pattern, material combination and surrounding fluid were also investigated. The test apparatus consists of a cantilevered tube with a simulated tube support plate at the ''free end''. Tube vibration is induced by an electromagnetic exciter to simulate the flow-induced tube motion occurring in a real heat exchanger at the tube/tube support plate interface. Tests are conducted in air, water, and oil, all at room temperature. Wear rate increases significantly with the magnitude of the impact force between the tube and its support plate; the degree and trend of the wear rates are highly dependent on the mechanical and metallurgical properties of the tube/support material combination; the rate of impact/fretting wear decreases with increasing frequency. An empirical formula is …

In FY 1987, a program was initiated to demonstrate technology for recovering transuranic (TRU) elements from defense wastes. This hot demonstration was to be carried out with solution from the dissolution of irradiated fuels. This recovery would be accomplished with both PUREX and TRUEX solvent extraction processes. Work planned for this program included preparation of a shielded-cell facility for the receipt and storage of spent fuel from commercial power reactors, dissolution of this fuel, operation of a PUREX process to produce specific feeds for the TRUEX process, operation of a TRUEX process to remove residual actinide elements from PUREX process raffinates, and processing and disposal of waste and product streams. This report documents the work completed in planning and starting up this program. It is meant to serve as a guide for anyone planning similar demonstrations of TRUEX or other solvent extraction processing in a shielded-cell facility.

The TCLUST1 computer program was developed to study the transient thermal behavior of a subassembly of a liquid-metal fast breeder reactor (LMFBR) that is thermally coupled to its six neighboring subassemblies. Each of the seven subassemblies may be either a reflector subassembly, which contains a single solid hexagonal rod, or a pin-bundle subassembly. The TCLUST1 analytical model was developed based on conservation of energy, and the temperature distribution in the subassembly was obtained using the successive over-relaxation (SOR) technique. Measured temperatures obtained from a natural-convection flow test performed in EBR-II compare well with those predicted by TCLUST1. Appendixes describe the code input and go through a sample program.