Report issued by the Brookhaven National Laboratory discussing the instrumentation, operation, and maintenance of the established area radiation monitoring stations. This report includes maps, tables, illustrations, and photographs.

Report issued by the Brookhaven National Laboratory discussing capture positron ratios. As stated on page 1, "the purpose of this report is to present aids for the simple determination of the relative probabilities of K-electron capture and positron emission for allowed and first-forbidden transitions" (p. 1). This report includes tables, and illustrations.

Report issued by the Brookhaven National Laboratory discussing methods of nitrogen fixation, and their economic impacts. As stated in the introduction, "studies are described on circulating dust fuels, as well as fixed plated, porous bed, and other types of fuels as the basis for chemo-nuclear reactor designs, and the various fuel systems are compared on a technical and economic basis" (p. 3). This report includes tables, and illustrations.

This technical report discusses techniques that have been developed for "computing the angular thermal flux spectrum emerging from a lattice. These methods are applied to water lattices and it is found that the computed spectra are sensitive to the geometrical description of the lattice, but insensitive to the anisotropic scattering by water. Comparisons with measured spectra indicate that corrections for gradients and the finite size of the experimental lattice are important." -- from abstract (p. 3).

This report is a progress report detailing operations and ongoing projects at the Brookhaven National Laboratory. The report describes new developments with buildings and progress regarding ongoing experiments. The report includes photographs showing progress in the construction of the reactor and other images and figures that accompany the descriptions of projects.

From Abstract: "The diffusion cooling coefficient in graphite has been determined by measuring the change in the asymptotic average velocity with buckling, by pulsed neutron methods. The times necessary to establish equilibrium spectra in graphite and heavy water have been measured and are reported."

Sheline and Johnson made Mg28 through the reactions Si30(γ,2p)Mg28 and Mg26(α,2p)Mg28 in order to characterize and determine a decay scheme for the new nuclide. Lendner separated a magnesium fraction from the spallation products of the irradiation of chlorine, as sodium chloride, with 340-MeV protons. The 21-h activity that was present was deduced to be Mg28 from the 2.3-m half-life of the Al28 that was milked from it, as Sheline and Johnson had done.

A previous report on this subject (Brookhaven National Laboratory, AGS Internal Report, ECR-4) described in detail the methods of measuring the injected and accelerated proton currents in the Brookhaven AGS up to May 1961. At that time the accelerated current was measured by extracting the bunch frequency component of the signal given by a pair of radial position observation electrodes. The injected current was also determined by the signal induced on a similar pair of radial position electrodes. Absolute values were then determined from machine parameters and a wire measurement of the electrode sensitivities. Linac currents, however, were measured with transformers, calibrated by putting known current pulses through a single turn loop. As described in ECR-4, a crude current transformer was placed on the AGS ring and cross-calibration measurements were carried out using a half turn injected beam. The pickup electrode value was then found to be about 10% higher than that given by the current transformer. This amount of disagreement was within the estimated accuracy of the measurements and calibrations used at that time.

The discovery of the vector meson which mediates the weak interactions, W,1 would be of extreme importance for weak interaction physics and for field theory in general. The W, if it exists, will be made in a variety of processes such as v+N →W+ + e- + N, or n- + P →W- + P, or, as studied in this note, P + P → D + W+. The W couples to leptons with a dimensionless constant [constant not transcribed] where G is the Feral constant defined t=so that [constant not transcribed]. Thus for [equation not transcribed] and the smallness of this constant is, evidently, what makes any of the above processes difficult to detect. The W may have a variety of decay modes.

Internal-conversion coefficients may be thought of as consisting of two parts: a usually dominant part which depends only on the atomic number and the nuclear transition energy, and a usually small part depending explicitly on nuclear transition matrix elements. This latter part arises from the penetration of the converting atomic electrons within the transforming nucleus.

Nusselt numbers have been calculated for heat transfer to fluids flowing through annuli under conditions of uniform heat flux and fully established velocity and temperature profiles. The following cases were considered: (a) laminar flow, (b) slug flow, (c) turbulent flow with molecular conduction only, and (d) turbulent flow with both molecular and eddy conduction. These Nusselt numbers were determined for two conditions: heat transfer from the inner wall only and heat transfer from the outer wall only. The results were correlated by semi-empirical equations. The final results obtained on cases (a), (b), and (c) are applicable to any fluid, whereas those obtained on (d) are for liquid metals only. Wall- and bulk-temperature relationships for the above four cases were also determined. These relationships were treated as dimensionless temperature ratios. Both the Nusselt numbers and temperature ratios were evaluated over the r1/r2 range, zero to unity; the former being the case of the circular pipe, and the latter, the case of infinite parallel plates.

The problem of separation of beams of particles of different masses but of the same momentum at Bev energies is the subject of a great deal of study at several high energy laboratories. In this note we shall describe the problem and tabulate a few of the cogent parameters. Frequently the student of high energy interactions is faced with a beam of miscellaneous particles coming from an accelerator. By standard techniques this beam can be rendered approximately parallel and an inch or so in diameter. By passage through a magnetic field the beam can be analyzed in momentum. Now it frequently happens that the particles in which the experimenter is particularly interested make up only a small fraction of the beam and the exigencies of the proposed experiment may well demand that the background of undesired particles be drastically reduced. The problem is difficult because the velocities of the various particles are almost equal to each other and to the velocity of lights; this makes time-of-flight techniques relatively ineffective. The energies of the particles are almost equal so electrostatic separation also is difficult. Since the beam is already analyzed in momentum, further separation by magnetic means is impossible.

In the course of a general study of K- p interactions at 2.24 Bev/c incident K- momentum, we have investigated the following reactions, the experimentally detectable final states of Ξ Κ π system. In this report we shall discuss the possible existence of Ξ π resonances above 1530 Mev and the evidence for possible structure in the overlap regions. An evaluation of the isospin of the Ξ * will be made. In addition, production and decay angular distribution of the Ξ * will be presented.

The inelastic scattering of low energy neutrons from condensed matter offers a means of investigating the motions of atoms in liquids or solids down to times in the order of 10-12 to 10-13 seconds. The theoretical framework and techniques of such measurements are discussed and the results of cold neutron measurements with liquid H2O and Pb are presented. In H2O the neutron data show that for times in the order of 10-12 seconds the water molecule tends to maintain some average position with respect to its neighbors. In this sense the short time behavior of water is similar to that of a solid. Diffusion characteristic of a liquid occurs at later times. Measurements in liquid lead just above the melting point also show the same effect but not as markedly.

Programs are under way at Brookhaven National Laboratory to study the behavior of fission products released from reactor fuel materials. Major emphasis has been placed on fission product iodine because of the physiological hazard associated with the I131 isotope. A complete reactor safety analysis, considering either a slow or rapid release of fission products, requires a knowledge of the chemical and physical states of the fission products during release, the extent of their release, and an understanding of their chemical interactions with the reactor environment.

Speed limits of decimal counting schemes based on binary-to-decimal conversion are considered. A simple "1-2-4-8" decimal logic is described, which is inherently as fast as the basic bistable. A decade for counting in 100-200 Mc/sec range, based on this logic and the tunnel diode-transistor bistable, is presented.

Mammalian bone marrow contains a considerable number of small lymphoid cells (small lymphocytes and small lymphocyte-like cells). The total number of these cells (50,000 to 500,000 per mm3) depends on species, age and other factors. The origin, function and fate of these cells remain obscure in many respects. In particular, it has not been shown beyond doubt, if and to what extent small lymphoid cells enter the bone marrow via the blood stream or if their origin is in part or entirely within the bone marrow. In addition it has not been clearly shown whether or not these cells may function as multipotential hemopoietic stem cells. Results obtained from experiments with irradiated parabiotic animals and animals given regional fractioned doses of X-irradiation, and transplantation of leukocytes from peripheral blood into lethally irradiated recipients afford indirect evidence that peripheral blood of mice and rats may contain stem cells capable of DNA synthesis and division.

The blue-green algae, classed as primitive monerans, represent the lowest level of organization known to possess a higher plant type of photosynthesis. The role in photosynthesis of the phycocyanin in these organisms is particularly interesting from the point of view of ultrastructural biochemistry. It has been shown repeatedly that despite the primacy normally assigned to chlorophyll, the light absorbed by phycocyanin is used more efficiently for photosynthesis (equated with photosynthetic oxygen evolution). This property is all the more intriguing since Hill activity is very labile in these organisms; the loss being correlated with the release of phycocyanin. Then too, it has been observed that fluorescence at about 685 mμ, attributed to chlorophyll, is proportionately greater for wavelengths absorbed by phycocyanin. French and Young attributed the differential to inactive absorption by carotenoids in the "Soret" region of chlorophyll, but Duysens concluded that the magnitude of the difference observed by him was too great to be explained by screening. Duysens proposed the existence of two pools of chlorophyll of about equal size; one containing fluorescent, photosynthetically active chlorophyll in proximity to phycocyanin, the other nonfluorescent, photosynthetically inactive and remote from phycocyanin.

The vacuum system for the bubble chamber must evacuate rapidly a volume of approximately 500 cubic feet and eliminate the outgassing of a surface area of approximately 50,000 square inches. The backstreaming of oil from the diffusion pump must be kept to an absolute minimum to prevent oil films forming on the window. The vacuum system must also provide the protection against liquid nitrogen and hydrogen/leaks to prevent pressure buildup.

One of the major, as well as first, decisions which must be taken on a large chamber is to decide on the direction of the magnetic field, i.e., vertical or horizontal. Either alternative has advantages and disadvantages ad it is the intention of this note to discuss these features.

When the design of the refrigerator was begun, one of the important parameters was refrigeration capacity required. In order to estimate the required hydrogen refrigeration load the following had to be considered: 1. Dynamic Load due to pulsing of the chamber. Although this has been determined some two years ago through test work, it has not been published as of this date and will be presented here. 2. Static losses due to conduction, radiation, and convection. This is covered by Eng. Note BC-03-0-B. 3. Cool-down requirements. This is covered by Eng. Note BC-03-0-C.

Prior to assembly into the 80" bubble chamber, the expansion system was subjected to a series of tests to check piston dynamics and gain information on the reliability of the various components. Furthermore, the rest provided operating personnel with the opportunity to become familiar with the operation and maintenance of the expansion system. Two separate tests were performed with the apparatus that was located at the north end of the AGS experimental area; one during the week of Oct. 15 and the other during the week of Nov. 12. The system was run with helium gas supplied from AGS compressor room and the piston was operated at room temperature.

We have decided to try pressure-moulding coathangers, and this is a report on the specifications and tolerances R. R. Rau and I have calculated

Reliability of individual components and the ability to produce refrigeration even if one or two of these components should be in operable are the prime design parameters of this cycle. Each component was looked at with these two parameters in mind and any item that had obvious objections was either rejected or backed up with another piece of equipment. Along this line, you will notice (refer to line schematic) two hydrogen compressors and two nitrogen compressors; for full capacity all are required. However, in the event of the loss of use of one of these compressors, it will still be possible to produce at least 50% of the rated capacity. To eliminate outside influences, the cycle was designed around what may be called a closed cycle cascade system; with the assumption that there is no loss of power, cooling water, the equipment can run indefinitely. The nitrogen and hydrogen cycles are of the Simple Linde type with pre-cooling making use of the Joule-Thompson Effect for the refrigeration produced. The low-temperature components of the cycle have no moving parts other than valves, consisting entirely of counter-flow heat exchangers to lower the temperature of the incoming high-pressure gas to a level where …