Results of a questionnaire survey are presented on reactor supervisor and operator education, experience, and training, and on certification procedures by reactor category. The questionnaires were obtained from 362 supervisors, 393 operators, 44 supervisor trainees, and 139 operator trainees.

Investigation of whether the multi-thousand psi pressure pulses that occurred in the BORAX-I and SPERT-I destructive power excursion could have been generated by thermal mechanisms in the geometries of unmolten reactor cores. These pressure pulses were "at least as high as 6,000 psi, and probably higher than 10,000 psi " in BORAX I, and "between 3,000 and 4,000 lb/in" in SPERT I. An experimental investigation was undertaken of pressure pulse generation by purely thermal means.

Abstract. the direct and inert-gas radiolysis, as well as the vacuum ultra-violet photolysis of CD3CH2CD3, CH3CD2CH3 and C3H2+C3D3 mixtures have been investigated in the presence of radical scavengers. The major conclusions are : (a) at atmospheric pressures, neutral propane decomposition contributes to the observed products although to a lesser extent than parent ion decompositions ; (b) a variation in pressure has a pronounced effect on the fragmentation of the parent ion ; (c) the hydrogen atoms in the ethyl ion are randomized in the direct as well as in the inert-gas sensitized radiolysis ; (d) rearrangement in the parent ion is of minor importance in the radiolysis ; (e) although the formation of propylene is related to the propyl ion, it is not necessarily produced by the neutralization of this ion.

This technical report describes the development, design, operation, and performance of a full-circle, radial-vane steam separator for the boiling water section of a nuclear superheat reactor. Steam-water tests of this model have demonstrated that is has vane capacity in excess of that required for the 300-Mx(e) separate superheat reactor and for the 300-Mw mixed spectrum superheat reactor. It is proposed that the vane capacity requirement of the 600 Mw(e) separate superheat reactor may be attained by increasing the nozzle length.

From abstract: "This project was a study of electrostatic classification of submicron aerosols. Classification of particles as small as 0.006-[mu]-diameter was shown to be feasible, and good classification of atmospheric dust was achieved. However, a practical solution to the problem of overlapping between particles larger and smaller than 0.1 [mu], the point of minimum electric mobility, was not found."

"lsotope dilution techniques are described for the assay of chlorinated hydrocarbon pesticides and organic phosphorus pesticides in foods. Results are given for the determination of tetranitro-DDT-dianilide, dianilide of tetranitro- DDE, dieldrin, systox, and derivatives of these compounds. "

From abstract: "In this paper the motion of a nucleus with an intrinsic quadrupole moment in an external electrostatic field gradient is discussed from a classical point of view. It is shown that in the classical approximation the angular momentum may precess about the direction of strongest field gradient or about the direction of intermediate field gradient, but not about the direction of weakest field gradient. The classical precession frequencies are found to be related to the quantum mechanical dipole transition frequencies."

Abstract: This technical report contains a summary of experimental and analytical work performed on cold clean SM-1 Core II with special components and PM-2A Core I each with thermal shield and vessel mockups. The purpose of this work was to define the neutron intensity and spectra to which the pressure vessels are subjected in order to assess the effect of irradiation on the vessel lifetimes. The radial distributions of the energy dependent neutron flux per unit power in the core and vessel mockups are presented. The uncertainties associated with the measurements are also given. In addition to graphical and tabular presentations of the test results, discussions are provided on the experimental techniques and theory. A review of the analytical models is provided in addition to the calculational results. A special analytical study of the the PM-2A Core I power distribution and absolute power level determination is given. A comparison of the experimental and analytical results is made and conclusions and recommendations presented.

Abstract: A detailed description of the PM-2A reactor, primary system and instrumentation is presented. A general description of the secondary system and plant arrangement at Camp Century, Greenland is included. The results of the startup physics, shielding, thermal and hydraulics and radiochemistry test are presented. the analysis performed on the shielding and thermal and hydraulic tests is included. The shielding problem at startup and the shielding modification made to the plant are described along with the radiation measurements made in these areas.

This report covers the S-I-5-B-M fuel irradiation in the GETR Maritime Loop during the second quarter of fiscal year 1962. The data are summarized in Section II. Discussions on fuel performance, fuel environment (water chemistry), problems with loop operations, and the crud deposition program are included.

The absolute differential cross sections for elastic scattering of 31-Mev He3 ions on Be, Al, Cu, Sn(nat), Sn120, and Bi have been measured in the angular range of approximately 10 to 120 deg in the center-of-mass system. Thin self-supporting foil targets were chosen to span the parameter A 1/3, where A is the target mass number. The first excited states of the isotopes of the above elements had sufficient energy separation from the ground state to enable elastic scattering to be resolved from inelastic scattering. The detection system, consisting of Cal(Tl) scintillation crystals, was capable of 3%pulse-height resolution and 1 degree angular resolution. Characteristically, the light-element angular distributions show strong diffraction effects. The differential cross section divided by the Rutherford cross section decreases exponentially at large angles for the heavy elements, and the differential cross sections break away from Rutherford behavior at angles which increase almost linearly with increase of atomic number of the target nucleus. A comparison of the results for natural tin, and tin enriched to 85% in Sn120, indicated that within the experimental uncertainties over the measured angular interval, there were no pronounced isotopic effects. The data are presented both in tabular and graphical form to allow …

"Rates of acetylene polymerization induced by Kr/sup 85/ in d-c fields were up to 15 times greater than those observed when no fields were imposed. Work to determine the relations between acetylene pressure, Kr/sup 85/ concentration, and the field intensity is continuing. In other activities, equipment is being designed to study the effects of megacycle electric fields on radioinduced chemical reactions."

"As presented in the original proposal the project consisted essentially of three parts: Phase I, Development and refinement of a radiochemical flow counting technique for the study of kinetics of reactions in solution ; Phase II, The application of this technique to the detailed study of the mechanism of solvolysis of sulfonium salts in mixed solvents ; Phase II, The further application of this kinetic technique, as a longer term aim, to other reacting systems of biochemical or other interest. This report covers the work of the contractual period 1 Sept. 1959 to 31 Aug. 1960."

""Progress is reported on: design of a continuous flow system for the irradiation of silane using a Cos5 source; pile irradiation of silane samples at elevated temperatures; investigation of materials other than silane, including nonsilicon compounds as well as those containing the silyl group; modification of the existing vacuum system for handling larger quantities of silane as well as increasing the accuracy of the pressure measurements; and use of an electric discharge for the decomposition of silane. Studies were continued on the radiation- and thermalinduced decomposition of sikane at 325 and 350 deg C. A preliminary value of G= 33 was obtained for silane."

"Progress is reported on: design of a continuous flow system for the irradiation of silane using a Cos5 source; pile irradiation of silane samples at elevated temperatures; investigation of materials other than silane, including nonsilicon compounds as well as those containing the silyl group; modification of the existing vacuum system for handling larger quantities of silane as well as increasing the accuracy of the pressure measurements; and use of an electric discharge for the decomposition of silane. The work performed during the period of this report consisted of the following: 1. Preparation of samples of trichlorosilane and hydrogen and subsequent thermal and irradiation studies, and analysis of these samples. 2. Preparation of mixed samples of silane and argon and subsequent thermal and irradiation studies and and analysis. 3. Outlining of future investigations to be conducted on this project."

"A series of glass compositions containing uranium oxide was investigated to determine fiberizability and physical properties of resultant fibers. The basic properties to be determined were the maximum U/sub 3/O/sub 8/ content in a fiberizable glass and the maximum service temperature of the fibers. Glasses containing 60 wt% U/sub 3/O/sib 8/ were fiberizable; the fibers had strengths of 100,000 psi at 1600 deg F. Fiber-forming equipment was installed at Moun Laboratory to produce glass fibers containing PuO/sub 2/. Fibers were successfully formed in the first trials. For additional work a series of base glasses were provided affording a wider range of both PuO/sub 2/ solubility and physical properties."

This report follows an investigation made to determine creep-rupture data for three sheet materials. Fourteen of sixteen tests were made in an atmosphere of carbon dioxide within hermetically sealed capsules, analyzing the reaction of the three sheet metals: 347 stainless steel, iron-aluminum-chromium alloy designated 261C, and a zirconium-base alloy, AE1H. Minimum creep rate, per cent elongation, and rupture life were determined and reported.

"A comparison of the grafting of a 2:1 molar mixture of methacrylic acid and styrene to both polypropylene film and fabric using CO60 source and electron accelerator as sources of ionizing radiation is made on the basis of mutual or simultaneous grafting and post-irradiation grafting.

The study which has been carried out under Contract AT(30-1)2477 has as its objective the review of all work which has been done on the application of radionuclear techniques to research in water resources and supply, the evaluation of this work, and the suggestions of specific experiments which must be performed if these applications are to be extended.

Previous studies have been made of the relationship among acceleration, specific power, payload fraction, and travel time for many interplanetary missions. These utilized tangential thrust and correspond to the high thrust Hohmann transfer orbits. In addition, a complete optimization of the one way Mars mission has been accomplished. Since the minimum Jupiter round trip time was six and a half years for tangential thrust, calculations were carried out using higher energy transfer orbits. It is shown that the orbit-matching problem cannot be solved with tangential thrust programming in this case. The initial period of acceleration away from the earth's orbit was accomplished using tangential thrust in order to minimize energy expenditure. This was followed by a period of coasting until the proper moment arrived for commencing the orbit-matching maneuver. This terminates when the velocity and spatial coordinates of Jupiter's orbit are matched. The technique used for accomplishing these various orbit matching conditions without iteration are described. Best results for the final maneuver were obtained with the thrust vector approximately normal to the velocity vector. By this technique it is shown that the round-trip Jupiter mission may be carried out in four and an half years with 16% payload and 0.10 …

The chief purpose of this contract is the development of ceramic materials with high dielectric constant and high dielectric strength values, and suitable for use of dielectrics in capacitors capable of storing large amounts of energy in small volumes. Work performed during the fourth quarter included (1) Material development and sample preparation; (2) Sample testing; (3) discussion of ceramic density measurements; (4) Optical studies of titanates; (5) Fabrication of large ceramics; and (6) Capacitor design.

The chief purpose of this contract is the development of ceramic materials with high dielectric constant and high dielectric strength values, and suitable for use of dielectrics in capacitors capable of storing large amounts of energy in small volumes. Work performed during the fifth quarter included (1) Material development and sample preparation; (2) Sample testing; (3) Optical studies of titanates; (4) Fabrication of large ceramics; and (5) Capacitor design.

Report covering progress regarding a study on radiation synthesis involving halogenated compounds. Experimental progress, results and discussion are included.

The purpose of this experiment is to study the quantitative adsorption characteristics of a carbon adsorber bed receiving a radioactive inert gas in a helium stream. An objective of the experiment is to measure the equilibrium transmission of the radio-active gas through a carbon adsorber in order to determine if radio-active decay of the adsorbed gas permits additional adsorption.