The following report covers the construction materials selected for laboratory corrosion studies and the determination of their corrosion rates in process solutions.

From abstract: "This project was a study of electrostatic classification of submicron aerosols. Classification of particles as small as 0.006-[mu]-diameter was shown to be feasible, and good classification of atmospheric dust was achieved. However, a practical solution to the problem of overlapping between particles larger and smaller than 0.1 [mu], the point of minimum electric mobility, was not found."

From abstract: "Results of two methods of reducing the phosphate and vanadate contents of MgX, a uranium precipitate from the Belgian Congo, are described...Chemical analyses of several samples of pitchblende and MgX are presented."

Abstract: Studies were made of the air-borne contamination present during the operation of reducing plutonium tetrafluoride powder to the metal. Equipment design changes were made and operation technique changes were made until the amount of contamination present during operations was well below tolerance levels.

This report discusses a study which explores the effects of feed and acidity on extractive methods. From abstract: "Results from fractional precipitation of MgX from dilute sulfuric acid solutions indicate that, in the presence of sufficienct iron, phosphate is precipitated as ferric phosphate, and not as uranyl phosphate."

Abstract: "X-ray and microscopic examination of slags from uranium metal production bombs which gave good and bad yields in the plant at St. Louis have indicated the significance of uranium oxide formation. Apparently the oxide (UO2) results from reaction of the UF4 with linear material, particularly with moisture in the liner."

Report discussing laboratory investigations of thorium nitrate purification. Batch equilibrium data, solubility data, viscosity data, density data, and the results seven batch countercurrent extraction tests and two selective stripping tests are included.

From introduction: This report presents the results of the two phases of the work: study of the compatibility of beryllia bodies with a coating material, molybdenum; and studies of beryllia-beryllium body fabrication.

This report discusses tests of several nonaqueous extractive methods meant to leach Western ores of uranium and vanadium. Explanations of different methods are given as well as their extraction results.

Abstract: "The results of leaching studies on sulphide froth products obtained from the flotation of high-sulphur pitchblende are presented. The distribution of molybdenum in flotation products is also given. The flotation test at Middlesex is evaluated."

From abstract: "This report describes the construction and operation of a mixer-settler pilot plant for the purification of mantle-grade thorium nitrate. The liquid-liquid extraction process utilized 30% tributyl phosphate - 70% 'Solvesso-100' as the organic solvent and nitric acid as the salting agent. Continuous steady-state operation of the equipment was demonstrated, with very good recovery of thorium."

Report discussing progress from May, 1960 through July, 1960 on a study of radiation synthesis involving halogenated compounds. Experimental procedures and data are included.

Report covering progress regarding a study on radiation synthesis involving halogenated compounds. Experimental progress, results and discussion are included.

This report follows an investigation made to determine creep-rupture data for three sheet materials. Fourteen of sixteen tests were made in an atmosphere of carbon dioxide within hermetically sealed capsules, analyzing the reaction of the three sheet metals: 347 stainless steel, iron-aluminum-chromium alloy designated 261C, and a zirconium-base alloy, AE1H. Minimum creep rate, per cent elongation, and rupture life were determined and reported.

The following report examines the most suitable enamels recommended for protection of aluminum slug cans.

Introduction: "During the early planning of the multicurie cells at Hanford it was decided that a slave type manipulator would be necessary to perform the experiments for which the cells were being designed. The design required steel roofs for installation through a port hole in the face. Technical Services Equipment Development began developing the proposed manipulator in January 1951 by making a study of those existing at that tune. None met the requirements which had been established; therefore, the design of a special manipulator was started immediately."

This report analyzes a linear, hard-core pinch tube built to examine tubes afflicted by small-scale instabilities evident from many observations.

This report describes a toroidal version of the hard-core pinch and the additional information it can obtain to what the analogous linear pinch can get.

Abstract. Experimental work was carried out to improve material conversion efficiency and to reduce handling costs inherent in the present process for production of high purity calcium. Charges up to 54 pounds were handled successfully in the equipment available. Material losses were reduced and more complete removal of alkali and alkaline earth metals was effected by controlled pressures of inert gas and by melting under positive pressure of Argon.

A good determination of the resonance absorption of uranium when admixed with various substances is necessary so that calculations can be made on the efficiency of homogeneous piles. The original experiments along these lines were undertaken by Creutz, Jupnik, and Snyder (C-116) and consisted of experiments on the resonance capture in pure U, UO2, U3O8, and one experiment on capture in a mixture of U3O8 and graphite. These experiments were done at the cyclotron in Princeton and consisted of determining the ratio of the twenty-three minute activity of uranium to an iodine monitor placed in some position with respect to the sample. By using spheres of different radii both the volume and the surface absorptions were measured. It was considered very desirable to extend these measurements to mixtures containing large amounts of graphite to uranium and also to investigate other substances containing hydrogen and deuterium. In addition it was decided to use both iodine and gallium monitors in the experiments. While the experiments were in progress, an absorption curve for uranium metal was made by Marshall using iodine and gallium detectors, which showed that there was a certain amount of overlapping of resonance levels of uranium and iodine.

It was desired to determine a method of evaporating boron to form a rather pure uniform tenacious coat of specified thickness. These coats are needed as monitoring films for neutron intensities, particularly in steel ionization cylinders. The most satisfactory method of evaporating boron employed a graphite filament. A mixture of amorphous boron and Carbenoid A was painted onto the filament which was then heated by electrical resistance method to 2300 degree C at which temperature the boron evaporated. Opaque films with purities up to 98% boron or better could be deposited by this method. Much heat was liberated by the filament, and it was found necessary to cool the steel cylinders during evaporation to prevent alloying of boron with the steel. Cathodic deposition also proved satisfactory for producing high purity films; this method has the advantage that little or no heat is produced during the process, but requires much time. Other less efficacious methods of depositing lighter films of born were developed; these are included in the following discussion.

Report discussing experiments investigating the effects of radiation and metal toxicity on the function of the liver, kidneys, adrenals, and bone marrow of experimental animals.

This report for December, 1947 describes progress in ore dressing and pyrometallurgical studies, chemical work on phosphates, and analytical work.

This report for March, 1947 describes progress regarding chemical and spectrographic analysis, chemical work, physical methods of analysis, and ore dressing and pyrometallurgical studies,