Abstract: Studies were made of the air-borne contamination present during the operation of reducing plutonium tetrafluoride powder to the metal. Equipment design changes were made and operation technique changes were made until the amount of contamination present during operations was well below tolerance levels.

Report discussing experiments investigating the effects of radiation and metal toxicity on the function of the liver, kidneys, adrenals, and bone marrow of experimental animals.

This report for December, 1947 describes progress in ore dressing and pyrometallurgical studies, chemical work on phosphates, and analytical work.

This report for March, 1947 describes progress regarding chemical and spectrographic analysis, chemical work, physical methods of analysis, and ore dressing and pyrometallurgical studies,

This report for January, 1947 discusses progress regarding ore dressing studies, pyrometallurgical work, chemical work, chemical and spectrographic analysis, and physical methods of analysis.

Memorandum presenting high-speed wind-tunnel tests of four thin NACA 63-series airfoil sections with a design lift coefficient of 0.2 with the uniform-load type of mean camber line to determine the effectiveness of forward movement of the minimum-pressure position in improving the high-speed lift characteristics of low-drag airfoils. Results regarding the tunnel-wall effects, lift coefficient, drag coefficient, and moment coefficient are provided.

Report presenting supersonic-tunnel tests of two models of similar supersonic airplane configurations at Mach numbers of 1.55, 1.90, and 2.32 to determine values of the drag, lift, pitching moment, yawing moment, and side force. The models were similar except for the vertical wing location relative to the body axis and horizontal tail; one had a high wing and one had a low wing. Results regarding the precision of data, Reynolds numbers of tests, results at the different Mach numbers, and Schileren photographs are provided.

This report for May, 1947 describes progress regarding analytical work, chemical work, beta-counting methods of analysis, ore-dressing and pyrometallurgical studies, and pyrometallurgical work.

The emf of galvanic cells at high temperatures was measured using uranium metal in equilibrium with its chloride as one half of the cell, the other half of the cell being some reference electrode such as silver - silver chloride. Several designs of cells tried are described. A value of 2.83 volts/eq. at 1170[degree]K and also at 990[degree]K is considered as the most probably value for the potential of the uranium halide couple.

Report describing results of experiments that involved injecting radioactive yttrium into animals: "The excretion, retention, and distribution of the yttrium was measured, and its effect on survival and growth was observed. The average total excretion of Y91 to the time of death (from 76 hours to 24 days) was a little less than 30 per cent of the injected dose" (p. 2).

From Summary: "An investigation of two 1/14 scale model configurations of an outboard nacelle for the XB-36 airplane was made in the Langley two-dimensional low-turbulence tunnels over a range of airplane lift coefficients (C (sub L) = 0.409 to C(sub L) = 0.943) for three representative flow conditions. The purpose of the investigation was to develop a low-drag wing-nacelle pusher combination which incorporated an internal air-flow system. The present investigation has led to the development of a nacelle which had external drag coefficients of similar order of magnitude to those obtained previously from tests of an inboard nacelle configuration at the corresponding operating lift coefficients and from approximately one-third to one-half of those of conventional tractor designs having the same ratio of wing thickness to nacelle diameter."

"An investigation to determine the performance and operational characteristics of the TG-1OOA gas turbine-propeller engine was conducted in the Cleveland altitude wind tunnel. As part of this investigation, the combustion-chamber performance was determined at pressure altitudes from 5000 to 35,000 feet, compressor-inlet rm-pressure ratios of 1.00 and 1.09, and engine speeds from 8000 to 13,000 rpm. Combustion-chamber performance is presented as a function of corrected engine speed and corrected horsepower" (p. 1).

"A flight investigation of an I-16 jet propulsion engine installed in the waist compartment of a B-24M airplane was made to determine the effect of induction-system icing on the performance of the engine. Flights were made at inlet-air temperatures of 15 deg, 20 deg., and 25 F, an indicated airspeed of 180 miles per hour, jet-engine speeds of 13,000 and 15,000 rpm, liquid-water contents of approximately 0.3 to 0.5 gram per cubic meter, and an average water droplet size of approximately 50 microns. Under the most severe icing conditions obtained, ice formed on the screen over the front inlet to the compressor and obstructed about 70 percent of the front-inlet area" (p. 1).

Models were tested to evaluate effects of Reynolds number for both laminar and turbulent boundary layers. Principal geometric variables investigated were afterbody shape and length-diameter ratio. Force tests and base-pressure measurements were made. Schlieren photographs were used to analyze the effects of viscosity on flow separation and shock-wave configuration and to verify the condition of the boundary layer as deduced from the force tests. The results are discussed and compared with theoretical calculations.