This report discusses results from several studies involved in the project. Investigations include: vibrational models for surface olefins and alkylidenes; mechanism of the formation and fragmentation of diosmacyclobutanes; reaction of dienes and allenes with diosmacyclobutanes; determination by nematic phase NMR of the structure of mononuclear and dinuclear ethylene complexes of osmium; and generation of ``coordinatively unsaturated`` complexes by protonation of methyl osmium complexes.

The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) (DOE/EA-0347) on the proposed surface remediation of the Maybell uranium mill processing site in Moffat County, Colorado. The mill site contains radioactively contaminated materials from processing uranium ore that would be stabilized in place at the existing tailings pile location. Based on the analysis in the EA, DOE has determined that the proposed action does not constitute a major federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969, Public Law 91-190 (42 U.S.C. {section}4321 et seq.), as amended. Therefore, preparation of an environmental impact statement is not required and DOE is issuing this Finding of No Significant Impact (FONSI).

The purpose of the research project was to investigate the feasibility of the chemically assisted in situ retort method for recovering shale oil from Colorado oil shale. The chemically assisted in situ procedure uses hydrogen chloride (HCl), steam (H{sub 2}O), and carbon dioxide (CO{sub 2}) at moderate pressure to recovery shale oil from Colorado oil shale at temperatures substantially lower than those required for the thermal decomposition of kerogen. The process had been previously examined under static, reaction-equilibrium conditions, and had been shown to achieve significant shale oil recoveries from powdered oil shale. The purpose of this research project was to determine if these results were applicable to a dynamic experiment, and achieve penetration into and recovery of shale oil from solid oil shale. Much was learned about how to perform these experiments. Corrosion, chemical stability, and temperature stability problems were discovered and overcome. Engineering and design problems were discovered and overcome. High recovery (90% of estimated Fischer Assay) was observed in one experiment. Significant recovery (30% of estimated Fischer Assay) was also observed in another experiment. Minor amounts of freed organics were observed in two more experiments. Penetration and breakthrough of solid cores was observed in six experiments.

The direct partial oxidation of CH{sub 4} to CH{sub 3}OH has been studied in a non-permselective, non-isothermal catalytic membrane reactor system. A cooling tube introduced coaxially inside a tubular membrane reactor quenches the product stream rapidly so that further oxidation of CH{sub 3}OH is inhibited. Selectivity for CH{sub 3}OH formation is significantly higher with quenching than in experiments without quenching. For CH{sub 4} conversion of 4% to 7% CH{sub 3}OH selectivity is 40% to 50% with quenching and 25% to 35% without quenching.

At two uranium mill sites in Rifle, Colorado, the US Department of Energy (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project is removing uranium mill tailings and contaminated subgrade soils. This remediation activity will result in the production of groundwater contaminated with uranium, heavy metals, ammonia, sulfates, and total dissolved solids (TDS). The initial remediation plan called for a wastewater treatment plant for removal of the uranium, heavy metals, and ammonia, with disposal of the treated water, which still includes the sulfates and TDSS, to the Colorado River. The National Pollutant Discharge Elimination (NPDES) permit issued by the Colorado Department of Health for the two Rifle sites contained more restrictive discharge limits than originally anticipated. During the detailed review of alternate treatment systems to meet these more restrictive limits, the proposed construction procedures were reviewed emphasizing the methods to minimize groundwater production to reduce the size of the water treatment facility, or to eliminate it entirely. It was determined that with changes to the excavation procedures and use of the contaminated groundwater for use in dust suppression at the disposal site, discharge to the river could be eliminated completely.

The objective of this work is to investigate, in the laboratory, the parameters associated with a chemically assisted in situ recovery procedure, using hydrogen chloride (HCI), carbon dioxide (CO{sub 2}), and steam (H{sub 2}O), to obtain data useful to develop a process more economic than existing processes and to report all findings. The technical progress of the project is reported. The project status is that the solutions to the problems discussed in the third quarter status, were found to function satisfactorily. Future needs have been considered, and appropriate equipment and instrumentation changes have been designed. Only one experiment was performed this quarter, with some improvement over the previous experiments. The increase in shale oil recovery followed directly from the changes discussed last quarter, but the improvement could have been larger with wider-spread implementation of the changes. Equipment was purchased to rectify the need, and will be installed shortly. Further, a minor change in the design was necessary to account for the brittleness of high temperature electrical resistance heating tapes. The focus of the work this quarter has been on the development of computer software to enable the use of on-line parameter identification, the design of the instrumentation necessary to adequately …

The polycrystalline nature of thin-film CdTe and CuInSe{sub 2} solar cells continues to be a major factor in several individual losses that limit overall cell efficiency. This report describes progress in the quantitative separation of these losses, including both measurement and analysis procedures. It also applies these techniques to several individual cells to help document the overall progress with CdTe and CuInSe{sub 2} cells. Notably, CdTe cells from Photon Energy have reduced window photocurrent losses to 1 mA/Cm{sup 2}; those from the University of South Florida have achieved a maximum power voltage of 693 mV; and CuInSe{sub 2} cells from International Solar Electric Technology have shown a hole density as high as 7 {times} 10{sup 16} cm{sup {minus}3}, implying a significant reduction in compensation. 9 refs.

The objective of this work is to investigate, in the laboratory, the parameters associated with a chemically assisted in situ recovery procedure, using hydrogen chloride (HCI), carbon dioxide (CO{sub 2}), and steam (H{sub 2}O), to obtain-data useful to develop a process more economic than existing processes and to report all findings. The technical progress of the project is reported. The progress of the project is that experiment preparations are underway. Reactor design, process design, and experiment design have been completed. The laboratory to be used has required extensive clean-up, and is nearly ready. Safety considerations are underway. Finally, an initial literature search has revealed some important aspects that need to be considered.

None

None