From Summary: "The report includes a description of the commonly used types and some others, the underlying principle utilized in the design, and some design data. The inherent errors of the instrument, the methods of making laboratory tests, descriptions of the test apparatus, and data in considerable detail in the performance of commonly used instruments are presented. Standard instruments and, in cases where it appears to be of interest, those used as secondary standards are described."

From Summary: "This report presents the results of tests in which the pressure distribution over the fixed wing of an autogiro was determined in both steady and accelerated flight. In the steady-flight condition, the rotor-blade motion was also measured. These data show that in steady flight the rotor speed as a function of the air speed is largely affected by the variation of the division of load between the rotor and the wing; as the load on the wing increases, the rotor speed decreases."

An investigation was made in the N.A.C.A. 7- by 10-foot wind tunnel to determine the aerodynamic section characteristics of an N.A.C.A. 23012 airfoil with a single main slotted flap equipped successively with auxiliary flaps of the plain, split, and slotted types. A test installation was used in which an airfoil of 7-foot span was mounted vertically between the upper and the lower sides of the closed test section so that two-dimensional flow was approximated" (p. 699).

A method has been developed for interpreting v-g records taken during the course of commercial transport operation. This method involves the utilization of fairly simple statistical procedures to obtain "flight envelopes," which predict that, on the average, in a stated number of flight hours, one value of airspeed will exceed the envelope, and one positive and one negative acceleration increment will exceed the envelope with equal probability of being experienced at any airspeed. Comparison with the actual data obtained from various airplanes and from various airlines indicates that these envelopes predict the occurrences of large values of acceleration and airspeed with a high degree of accuracy.

A method has been developed for interpreting V-G records taken during the course of commercial transport operation. This method involves the utilization of fairly simple statistical procedures to obtain "flight envelopes," which predict that, on the average, in a stated number of flight hours, one value of airspeed will exceed the envelope, and one positive and one negative acceleration increment will exceed the envelope with equal probability of being experienced at any airspeed. Comparison with the actual data obtained from various airplanes and from various airlines indicates that these envelopes predict the occurrences of large values of acceleration and airspeed with a high degree of accuracy.

From Summary: "The development and the use of a chart for estimating the pressure losses in jet-engine combustion chambers are described. By means of the chart, the pressure losses due to fluid friction and to momentum changes in the air flow accompanying combustion can be separately evaluated. The over-all pressure losses computed from the pressure-loss chart are within 7 percent of the experimental values for the three types of combustion chambers considered herein."

Models were tested to evaluate effects of Reynolds number for both laminar and turbulent boundary layers. Principal geometric variables investigated were afterbody shape and length-diameter ratio. Force tests and base-pressure measurements were made. Schlieren photographs were used to analyze the effects of viscosity on flow separation and shock-wave configuration and to verify the condition of the boundary layer as deduced from the force tests. The results are discussed and compared with theoretical calculations.

"A flight investigation of an I-16 jet propulsion engine installed in the waist compartment of a B-24M airplane was made to determine the effect of induction-system icing on the performance of the engine. Flights were made at inlet-air temperatures of 15 deg, 20 deg., and 25 F, an indicated airspeed of 180 miles per hour, jet-engine speeds of 13,000 and 15,000 rpm, liquid-water contents of approximately 0.3 to 0.5 gram per cubic meter, and an average water droplet size of approximately 50 microns. Under the most severe icing conditions obtained, ice formed on the screen over the front inlet to the compressor and obstructed about 70 percent of the front-inlet area" (p. 1).

From Summary: "An investigation of two 1/14 scale model configurations of an outboard nacelle for the XB-36 airplane was made in the Langley two-dimensional low-turbulence tunnels over a range of airplane lift coefficients (C (sub L) = 0.409 to C(sub L) = 0.943) for three representative flow conditions. The purpose of the investigation was to develop a low-drag wing-nacelle pusher combination which incorporated an internal air-flow system. The present investigation has led to the development of a nacelle which had external drag coefficients of similar order of magnitude to those obtained previously from tests of an inboard nacelle configuration at the corresponding operating lift coefficients and from approximately one-third to one-half of those of conventional tractor designs having the same ratio of wing thickness to nacelle diameter."

Memorandum presenting high-speed wind-tunnel tests of four thin NACA 63-series airfoil sections with a design lift coefficient of 0.2 with the uniform-load type of mean camber line to determine the effectiveness of forward movement of the minimum-pressure position in improving the high-speed lift characteristics of low-drag airfoils. Results regarding the tunnel-wall effects, lift coefficient, drag coefficient, and moment coefficient are provided.

"An investigation to determine the performance and operational characteristics of the TG-1OOA gas turbine-propeller engine was conducted in the Cleveland altitude wind tunnel. As part of this investigation, the combustion-chamber performance was determined at pressure altitudes from 5000 to 35,000 feet, compressor-inlet rm-pressure ratios of 1.00 and 1.09, and engine speeds from 8000 to 13,000 rpm. Combustion-chamber performance is presented as a function of corrected engine speed and corrected horsepower" (p. 1).

Report presenting supersonic-tunnel tests of two models of similar supersonic airplane configurations at Mach numbers of 1.55, 1.90, and 2.32 to determine values of the drag, lift, pitching moment, yawing moment, and side force. The models were similar except for the vertical wing location relative to the body axis and horizontal tail; one had a high wing and one had a low wing. Results regarding the precision of data, Reynolds numbers of tests, results at the different Mach numbers, and Schileren photographs are provided.

"Data obtained from an extensive investigation of the cooling characteristics of four multicylinder, liquid-cooled engines have been analyzed and a correlation of both the cylinder-head temperatures and the coolant heat rejections with the primary engine and coolant variables was obtained. The method of correlation was previously developed by the NACA from an analysis of the cooling processes involved in a liquid-cooled-engine cylinder and is based on the theory of nonboiling, forced-convection heat transfer. The data correlated included engine power outputs from 275 to 1860 brake horsepower; coolant flows from 50 to 320 gallons per minute; coolants varying in composition from 100 percent water to 97 percent ethylene glycol and 3 percent water; and ranges of engine speed, manifold pressure, carburetor-air temperature, fuel-air ratio, exhaust-gas pressure, ignition timing, and coolant temperature" (p. 207).

Report presenting the transonic drag characteristics of a series of wing-body combinations and their component parts using the free-fall method. The configurations examined had wings of various sweeps and thickness ratios mounted on identical bodies of fineness ratio 12.

Report presenting the tumbling characteristics of dynamic models of 14 airplane designs in the free-spinning tunnel for various loadings and configurations. Conventional airplanes were not found to tumble, but tailless and tail-first airplanes might depending on the amount of static longitudinal stability. Results regarding the effect of dimensional and mass characteristics, effect of controls, use of parachutes as a tumble-recovery device, accelerations, and possibility of pilot escape are provided.

The aerodynamic characteristics of 34 miscellaneous airfoils tested in the Langley two-dimensional low-turbulence tunnels are presented. The data include lift, drag, and in some cases, pitching-moment characteristics, for Reynolds numbers between 3.0 x 10 (exp 6) and 9.0 x 10 (exp 6).

"An investigation was conducted to determine the cause of failures in the seventh- and tenth-stage blades of an axial-flow compressor. The natural frequencies of all rotor blades were measured and critical-speed diagrams were plotted. These data show that the failures were possibly caused by resonance of a first bending-mode vibration excited by a fourth order of the rotor speed in the seventh stage and a sixth order in the tenth stage" (p. 1).

"High-speed wind-tunnel tests were conducted of two versions of a 0.17-scale model of the McDonnell XF2H-1 airplane to ascertain the high-speed stability and control characteristics and to study means for raising the high-speed buffet limit of the airplane, The results for the revised model, employing a thinner wing and tail than the original model, revealed a mild diving tendency from 0.75 to 0.80 Mach number, followed by a marked climbing tendency from 0.80 to 0.875 Mach number. The high-speed climbing tendency was caused principally by the pitching-moment characteristics of the wing" (p. 1).

Report presenting data from 95 subsonic flutter tests conducted in the flutter research tunnel on untapered cantilever wings with sweepback angles of 0, 45, and 60 degrees and carrying a single concentrated weight. The primary purpose of the investigation was to present experimental information to be used to evaluate analytical procedures for determining the flutter speed of weighted sweptback wings. The dynamic pressure, flutter velocity, Mach number, natural and flutter frequencies, and phase-angle relationships of the stresses for the natural and flutter frequencies are presented.

Report presenting a flight investigation of rocket-powered models at high-subsonic, transonic, and supersonic speeds to determine the zero-lift drag of fin-stabilized bodies of revolution differing in maximum diameter. All bodies had 6.04 fineness ratio and cut-off sterns with equal base area. The most favorable location out of the 20-percent, 40-percent, and 60-percent positions were evaluated for different speeds.

"An experimental investigation, using microscopic observation and color motion photomicrographs of the action, was conducted to determine the cause of fretting. Glass and other noncorrosive materials, as well as metals, were used as specimens. A very simple apparatus vibrated convex surfaces in contact with stationary flat surfaces at frequencies of 120 cycles or less than l cycle per second, an amplitude of 0.0001 inch, and load of 0.2 pound" (p. 135).

A method of calibrating the static-pressure source of a pitot static airspeed installation on an airplane in level flight, dives, and other maneuvers at high altitude and at transonic and supersonic speeds is described. The method principally involves the use of radar-phototheodolite tracking equipment. The various sources of error in the method are discussed and sample calibrations are included.

Report presenting a wind-tunnel investigation to explore the possibility of employing boundary-layer suction slots as a means for delaying laminar separation at the leading edge and turbulent separation over the rear portions of the airfoil section at high lift coefficients. Results regarding lift and drag are explored.

Report presenting an investigation in the 7- by 10-foot tunnel of the aerodynamic and hinge-moment characteristics of an untapered, aspect ratio 3, semispan horizontal-tail model with 45 degrees of sweepback through a range of Mach numbers. The model was equipped with an unbalanced and a horn-balanced 25-percent-chord elevator.