None

None

This paper discusses the results obtained in an ongoing study geared towards developing advanced mixed-metal oxide sorbents for desulfurization of coal-derived fuel gases in the temperature range of 350 to 550{degrees}C. The paper focuses on the study related to the development of durable sorbents suitable for fluidized-bed application and addresses thermodynamic considerations, sulfidation kinetics, regenerability, and the physical and chemical characteristics of a number of novel sorbents.

We present strange particle spectra and yields measured atmid-rapidity in sqrt text s=200 GeV proton-proton (p+p) collisions atRHIC. We find that the previously observed universal transverse mass(mathrm mT \equiv\sqrt mathrm p_T 2+\mathrm m2) scaling of hadronproduction in p+p collisions seems to break down at higher \mt and thatthere is a difference in the shape of the \mt spectrum between baryonsand mesons. We observe mid-rapidity anti-baryon to baryon ratios nearunity for Lambda and Xi baryons and no dependence of the ratio ontransverse momentum, indicating that our data do not yet reach thequark-jet dominated region. We show the dependence of the mean transversemomentum (\mpt) on measured charged particle multiplicity and on particlemass and infer that these trends are consistent with gluon-jet dominatedparticle production. The data are compared to previous measurements fromCERN-SPS, ISR and FNAL experiments and to Leading Order (LO) and Next toLeading order (NLO) string fragmentation model predictions. We infer fromthese comparisons that the spectral shapes and particle yields from $p+p$collisions at RHIC energies have large contributions from gluon jetsrather than quark jets.

The coordinated use of geographically distributed computers, or metacomputing, can in principle provide more accessible and cost- effective supercomputing than conventional high-performance systems. However, we lack evidence that metacomputing systems can be made easily usable, or that there exist large numbers of applications able to exploit metacomputing resources. In this paper, we present work that addresses both these concerns. The basis for this work is a system called Nimrod that provides a desktop problem-solving environment for parametric experiments. We describe how Nimrod has been extended to support the scheduling of computational resources located in a wide-area environment, and report on an experiment in which Nimrod was used to schedule a large parametric study across the Australian Internet. The experiment provided both new scientific results and insights into Nimrod capabilities. We relate the results of this experiment to lessons learned from the I-WAY distributed computing experiment, and draw conclusions as to how Nimrod and I-WAY- like computing environments should be developed to support desktop metacomputing.

This paper describes the approach and result of an assessment of health risks associated with long-term exposure to ozone. The health endpoint of interest is the probability of formation of mild lesions in the centriacinar region of the lung among children living in New York City. The risk model incorporates an exposure model and a health model. The exposure model is preliminary results of the probabilistic NAAQS Exposure Model (P-NEM) for ozone, and the health model is the judgments of active researchers about the likelihood of formation of ozone-induced lesions in the human lung. Children and New York City were chosen as the population and city of interest because it is believed that children are more sensitive to ozone than any other group of people, and New York City is more representative of other urban areas than Los Angeles, the other city of which P-NEM exposure results are available. Risk results are presented for ten exposure distributions generated by P-NEM, two air quality scenarios (``as-is`` and ``attainment``), and two exposure periods (1 and 10 ozone seasons). The results vary across experts, are not very sensitive to variations in P-NEM exposure distributions, are lower for attainment conditions than as-is conditions, and …

The G{sub 2}-MSSM is a model of particle physics coupled to moduli fields with interesting phenomenology both for colliders and astrophysical experiments. In this paper we consider a more general model--whose moduli Kahler potential is a completely arbitrary G{sub 2}-holonomy Kahler potential and whose matter Kahler potential is also more general. We prove that the vacuum structure and spectrum of BSM particles is largely unchanged in this much more general class of theories. In particular, gaugino masses are still suppressed relative to the gravitino mass and moduli masses. We also consider the effects of higher order corrections to the matter Kahler potential and find a connection between the nature of the LSP and flavor effects.

Enclosures for confinement of special nuclear materials (SNM) have evolved into the design of gloveboxes. During the early stages of glovebox technology, established practices and process operation requirements defined design criteria. Proven boxes that performed and met or exceeded process requirements in one group or area, often could not be duplicated in other areas or processes, and till achieve the same success. Changes in materials, fabrication and installation methods often only met immediate design criteria. Standardization of design criteria took a big step during creation of ``Special-Nuclear Materials R and D Laboratory Project, Glovebox standards``. The standards defined design criteria for every type of process equipment in its most general form. Los Alamos National Laboratory (LANL) then and now has had great success with Pu-238 processing. However with ever changing Environment Safety and Health (ES and H) requirements and Ta-55 Facility Configuration Management, current design criteria are forced to explore alternative methods of glovebox design fabrication and installation. Pu-238 fuel processing operations in the Power Source Technologies Group have pushed the limitations of current design criteria. More than half of Pu-238 gloveboxes are being retrofitted or replaced to perform the specific fuel process operations. Pu-238 glovebox design criteria are headed …

Article on activity coefficients at infinite dilution for organic compounds dissolved in 1-alkyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ionic liquids having six-, eight-, and ten-carbon alkyl chains.

The Exploratory Shaft (ES) at Yucca Mountain is planned to be constructed during 1985 and 1986 as part of the detailed site characterization for one of three sites which may be selected as candidates for location of a high-level radioactive waste repository. Conventional mining methods will be used for the shaft sinking phase of the ES project. The ES will be comprised of surface support facilities, a 1480-ft-deep circular shaft lined with concrete to a finished inside diameter of 12 ft, lateral excavations and test installations extending up to 200 ft from the shaft, and long lateral borings extending up to 2300 ft from the shaft. The estimated time for sinking the shaft to a total depth of about 1480 ft and completing the lateral excavations and borings is about two years. The major underground development planned for the primary test level at a depth of 1200 ft consists of the equivalent of 1150 ft of 15- by 15-ft drift. The total volume of rock to be removed from the shaft proper and the lateral excavations totals about 1/2 million cubic feet. Construction equipment for the shaft and underground excavation phases consists of conventional mine hoisting equipment, shot hole and …

This project has examined the impacts from the marine disposal of carbon dioxide based on the current state of knowledge.

We present S/1 and R/1 test results on unconditioned and 355 nm (3{omega}), 500 ps laser conditioned DKDP. We find up to {approx}2.5X improvement in fluence in the S/1 performance after 3{omega}, 500 ps conditioning to 5 J/cm{sup 2}. For the first time, we observe a shift to higher fluences in the R/1 results for DKDP at 3{omega}, 7 ns due to 500 ps laser conditioning. The S/1 results are compared to {rho}({phi}) results previously measured on the same DKDP crystal [1]. A consistent behavior in fluence was found between the S/1 and {rho}({phi}) results for unconditioned and 500 ps conditioned DKDP. We were successful at using Poisson statistics to derive a connection between the S/1 and {rho}({phi}) results that could be tested with our data sets by trying to predict the shape of the {rho}({phi}) curve. The value for the power dependence on fluence of {rho}({phi}) derived from the S/1 data was {approx}11 {+-} 50%. The results presented and discussed here imply a strong correlation between the damage probability (S/1) test and {rho}({phi}). We find a consistent description of the two test types in terms of a power law {rho}({phi}) and that this basic shape held for all cases, …

An analysis has been performed to determine the principal chemical forms for the structural and fission product elements during a postulated severe core damage accident in tritium powered core in the Savannah River Site (SRS) reactors. These reactors are powered with UAl{sub x} fuel and are used for the production of weapons materials. Six core elements, cesium, iodine, tellurium, strontium, barium, and lithium, were emphasized in this analysis. Other elements also included were aluminum, hydrogen, oxygen, uranium, molybdenum, silicon, zirconium, magnesium, iron, chromium, nickel, cadmium, zinc, cooper, manganese, nitrogen, and argon. The masses of each of the constituents used in the analyses were based on end-or-core life masses for the structural and fission product elements and on core gas volume for steam, N, and Ar. A chemical equilibrium analysis was performed using the Facility for Analysis of Chemical Thermodynamics (FACT) computer code at three temperatures (800, 1100, 1400 K) and two pressures (1 and 10 atmospheres). These temperatures and pressures are typical for postulated severe core accidents in the ATR.

This document discusses fission product behavior during two postulated loss-of-flow accidents (leading to high- and low-pressure core degradation, respectively) in the Advanced Test Reactor (ATR). These transients are designated ATR Transient LCPI5 (high-pressure) and LPP9 (low-pressure). Normally, transients of this nature would be easily mitigated using existing safety systems and procedures. In these analyses, failure of these safety systems was assumed so that core degradation and fission product release could be analyzed. A probabilistic risk assessment indicated that the probability of occurrence for these two transients is of the order of 10{sup {minus}5 }and 10{sup {minus}7} per reactor year for LCP15 and LPP9, respectively.

The transverse mass spectra and mid-rapidity yields for {Xi}s and {Omega}s plus their anti-particles are presented. The 10% most central collision yields suggest that the amount of multi-strange particles produced per produced charged hadron increases from SPS to RHIC energies. A hydrodynamically inspired model fit to the spectra, which assumes a thermalized source, seems to indicate that these multi-strange particles experience a significant transverse flow effect, but are emitted when the system is hotter and the flow is smaller than values obtained from a combined fit to {pi}, K, p and {Lambda}s.

No abstract prepared.

None

As a part of its compliance with the Department of Energy requirements for safety of nuclear facilities at the Savannah River Site (SRS), Westinghouse Savannah River Company (WSRC) assigns functional classifications to structures, systems and components (SSCs). As a result, changes in design, operations, maintenance, testing, and inspections of SSCs are performed and backfit requirements are established. This paper describes the Critical Protection Item (CPI) Classification for waste processing facility (WPF) at SRS. The descriptions of the WPF and the processes considered are provided elsewhere. The proposed CPI classification methodology includes the evaluation of the onsite radiological consequences, and the onsite and offsite non-radiological consequences from postulated accidents at the WPF, and comparison of these consequences with allowable frequency-dependent limits. When allowable limits are exceeded, CPIs are identified for accident mitigation.

This paper presents a study for a facility where a deflagration of flammable vapors takes place, and the generated pressure and temperature transients are analyzed to evaluate the pressure differentials induced on the various components of the facility to assesses their structural integrity. The temperature profiles are also analyzed to assess the qualification of the equipment that is required to operate during and after such an accident.

The increasing power density of integrated circuits (ICs) is creating the need for improvements in systems for transferring heat away from the chip. In earlier investigations, diamond films were used to conduct heat from ICs and spread the energy across a heat sink. The authors` investigation has indicated that a 635 {mu}m (25 mil) thick silicon substrate with embedded heat pipes could perform this task better than a diamond film. From their study, it appears that the development of a heat-pipe heat-spreading system is both technically and commercially feasible. The major challenge for this heat-spreading system is to develop an effective wick structure to transport liquid to the heated area beneath the chip. This paper discusses the crucial design parameters for this heat-pipe system, such as the required wick properties, the material compatibility issues, and the thermal characteristics of the system. The paper also provides results from some recent experimental activities at Sandia to develop these heat-pipe heat spreader systems.

Surface x-ray scattering has been used to determine the structure of Tl adlayers on the Au(111) electrode surface during the course of 0{sub 2} reduction. 0. reduction is considerably catalyzed by Ti adlayers on Au(111). The half-wave potential is shifted to more positive values in the presence of the Ti adlayer. In both, acid and alkaline solutions TI causes a change in the reaction mechanism from a 2-ereduction to a 4e-reduction in a limited potential range. The in-plane X-ray diffraction measurements revealed that the close-packed rotated-hexagonal Ti phase, which exists in the potential range between -0.4V and the bulk TI deposition at {approx}{minus} 0.7V, has a lower activity for 0. reduction than the low-coverage phases in both solutions. It supports a 2e-reduction.0{sub 2} reduction does not change the TI coverage in this phase but causes a significant decrease of the in-plane diffracted intensity. The lower coverage phases which exist at more positive potentials, viz., aligned hexagonal in alkaline solution and patches of the (2 {times} 2)TI phase in acid solution, are conducive to a 4e-reduction. The diffraction intensity from these two phases, however, vanishes quickly during O{sub 2} reduction. It appears that the TI coverage remains on the surface unchanged. …

We propose measurements of the deeply virtual Compton amplitude (DVCS) {gamma}* {yields} H{bar H}{gamma} in the timelike t = (p{sub H} + p{sub {bar H}}){sup 2} > 0 kinematic domain which is accessible at electron-positron colliders via the radiative annihilation process e{sup +}e{sup -} {yields} H{bar H}{gamma}. These processes allow the measurement of timelike deeply virtual Compton scattering for a variety of H{bar H} hadron pairs such as {pi}{sup +}{pi}{sup -}, K{sup +}K{sup -}, and D{bar D} as well as p{bar p}. As in the conventional spacelike DVCS, there are interfering coherent amplitudes contributing to the timelike processes involving C = - form factors. The interference between the amplitudes measures the phase of the C = + timelike DVCS amplitude relative to the phase of the timelike form factors and can be isolated by considering the forward-backward e{sup +} {leftrightarrow} e{sup -} asymmetry. The J = 0 fixed pole contribution which arises from the local coupling of the two photons to the quark current plays a special role. As an example we present a simple model.

Small-angle neutron scattering (SANS) can structurally characterize fullerenes in solvents with strong SANS contrast (e.g. CS{sub 2}). Deuterated solvents (e.g. toluene-d{sub 8}) have a high scattering length density (SLD), which is close to that of C{sub 60} and C{sub 70} moieties. Hence, there is virtually no SANS contrast with the solvent and these particles are practically ``invisible`` in such media. On the other hand, the negative scattering length of hydrogen means that the SLD of H{sup 1}-containing materials is much lower, so they have strong contrast with toluene-d{sub 8}. Thus, SANS makes it possible to study the size and shapes of modified buckyballs such as the polymer-substituted fullerenes, or flagellenes. These consist of C{sub 60} cores to which 1-4 polystryene chains (with a molecular weight, MW {approx_equal} 2000) are attached. The extrapolated cross section at zero angle of scatter [d{Sigma}/d{Omega}(0)] is a function of the number of pendant chains, so SANS can be used to assess the number of ``arms`` which are covalently attached to the fullerene ``sphere.`` Close agreement ({plus_minus}4%) between measured and calculated values of d{Sigma}/d{Omega}(0) along with independent estimates of the radius of gyration (R{sub g}) and second virial coefficient (A{sub 2}) for a calibration linear polystyrene …

Vacuum-arc deposition is used to deposit multilayer C films by modulating the sample bias during deposition. Effect of varying the sublayer thickness in multilayer films consisting of alternating layers of ``hard`` (68.4 GPa, -100 V bias) and ``soft`` (27.5 GPa, - 200 V bias) was investigated. Films consisting of equal thickness layers of hard and soft material and an individual layer thickness varying from 10 to 35 nm were deposited. Mechanical property measurements were obtained by finite element modeling of nanoindentation load-displacement curves. The film hardness values were about 20% below the average of the component layers and relatively independent of the layer thickness. TEM revealed deterioration of the multilayer structure when the sublayer thickness was below 15 nm due to implantation damage of the hard layers caused by the energetic C{sup +} ions of the soft layers (-2000 V bias) deposited over them. Pin-on-disk wear tests show that the wear rate drops when sublayer thickness is decreased below 20 nm and remains constant with further decreases in the layer thickness.