A parameter study was performed to examine the (shock) damage obtained with long-rod and spherical mono-material penetrators impacting two varieties of limestone. In all cases, the impacts were assumed to be normal to the plane of the rock and at zero angle of attack (in the case of the rods). Impact velocities ranged to 15 km/s but most calculations were performed at 4 and 6 km/s and the penetrator mass was fixed at 1000 kg. For unlined underground structures, incipient damage was defined to occur when the peak stress, {sigma}{sub pk}, exceeds 1 kb (100 MPa) and the applied impulse per unit area, I{sub pk}, exceeds 1 ktap (1 kb-{micro}s). Severe damage was assumed to occur when {sigma}{sub pk} exceeds 1 kb and I{sub pk} exceeds 1000 ktaps. Using the latter definition it was found that severe damage in hard, non-porous limestone with spherical impactors extended to a depth of 9 m on-axis for an impact velocity of 4 km/s and 12 m at 6 km/s. Cylinders with length-to-diameter (L/D) ratio of 8.75 achieved depth to severe damage of 23 m and 40 m, respectively under the same conditions. For a limestone medium with 2% initial gas porosity, the latter …

Recent years have seen the flowering of ''experimental'' mathematics, namely the utilization of modern computer technology as an active tool in mathematical research. This development is not limited to a handful of researchers, nor to a handful of universities, nor is it limited to one particular field of mathematics. Instead, it involves hundreds of individuals, at many different institutions, who have turned to the remarkable new computational tools now available to assist in their research, whether it be in number theory, algebra, analysis, geometry or even topology. These tools are being used to work out specific examples, generate plots, perform various algebraic and calculus manipulations, test conjectures, and explore routes to formal proof. Using computer tools to test conjectures is by itself a major time saver for mathematicians, as it permits them to quickly rule out false notions.

A real number alpha is said to be b-normal if every m-long string of digits appears in the base-b expansion of alpha with limiting frequency b-m. We prove that alpha is b-normal if and only if it possesses no base-b ''hot spot''. In other words, alpha is b-normal if and only if there is no real number y such that smaller and smaller neighborhoods of y are visited by the successive shifts of the base-b expansion of alpha with larger and larger frequencies, relative to the lengths of these neighborhoods

My talk will focus on our recent computational modeling results of uranium corrosion and the impact of impurities on uranium corrosion, which occurs primarily through hydriding Uranium hydriding is one of the most important processes that has received considerable attention over many years. Although significant number of experimental and modeling studies have been carried out concerning thermo chemistry, diffusion kinetics and mechanisms of U-hydriding, very little is known about the electronic structure and electronic features that govern the U-hydriding process. Our modeling efforts focus the electronic feature that controls the activation barrier and thus the rate of hydriding. Our recent efforts have been focused on the role of impurities such as Fe, Cr, Si, C, Al and so on. Moreover the role of impurities and the role of the product UH{sub 3} on hydriding rating have not been fully understood. Condon's diffusion model was found to be in excellent agreement with the experimental reaction rates. From the slopes of the Arrhenius plot the activation energy was calculated as 6.35 kcal/mole. Bloch and Mintz have discussed two models, one, which considers hydrogen diffusion through a protective UH{sub 3} product layer, and the second where hydride growth occurs at the hydride-metal interface. …

We use on-shell recursion relations to determine the one-loop QCD scattering amplitudes with a massless external quark pair and an arbitrary number (n - 2) of positive-helicity gluons. These amplitudes are the last of the unknown infrared- and ultraviolet-finite loop amplitudes of QCD. The recursion relations are similar to ones applied at tree level, but contain new non-trivial features corresponding to poles present for complex momentum arguments but absent for real momenta. We present the relations and the compact solutions to them, valid for all n. We also present compact forms for the previously-computed one-loop n-gluon amplitudes with a single negative helicity and the rest positive helicity.

We report on the operation of the Mercury laser with fourteen 4 x 6 cm{sup 2} Yb:S-FAP amplifier slabs pumped by eight 100 kW peak power diode arrays. The system was continuously run at 55 J and 10 Hz for several hours, (2 x 10{sup 5} cumulative shots) with over 80% of the energy in a 6 times diffraction limited spot at 1.047 um. Improved optical quality was achieved in Yb:S-FAP amplifiers with magneto-rheological finishing, a deterministic polishing method. In addition, average power frequency conversion employing YCOB was demonstrated at 50% conversion efficiency or 22.6 J at 10 Hz.

Pulse shape analysis is proved to be a powerful tool to characterize the performance of CdZnTe devices and understand their operating principles. It allows one to investigate the device configurations, electron transport properties, effects governing charge collection, electric-field distributions, signal charge formation, etc. This work describes an application of different techniques based on the pulse shape measurements to characterize pixel, coplanar-grid, and virtual Frisch-grid devices and understand the electronic properties of CZT material provided by different vendors. We report new results that may explain the performance limits of these devices.

Tenascin-X is an extracellular matrix protein initially identified because of its overlap with the human CYP21B gene. Because studies of gene and protein function of other tenascins had been poorly predictive of essential functions in vivo, we used a genetic approach that critically relied on an understanding of the genomic locus to uncover an association between inactivating tenascin-X mutations and novel recessive and dominant forms of Ehlers-Danlos syndrome. Tenascin-X provides the first example of a gene outside of the fibrillar collagens and their processing enzymes that causes Ehlers-Danlos syndrome. Tenascin-X null mice recapitulate the skin findings of the human disease, confirming a causative role for this gene in Ehlers-Danlos syndrome. Further evaluation of these mice showed that tenascin-X is an important regulator of collagen deposition in vivo, suggesting a novel mechanism of disease in this form of Ehlers-Danlos syndrome. Further studies suggest that tenascin-X may do this through both direct and indirect interactions with the collagen fibril. Recent studies show that TNX effects on matrix extend beyond the collagen to the elastogenic pathway and matrix remodeling enzymes. Tenascin-X serves as a compelling example of how human experiments of nature can guide us to an understanding of genes whose function may …

The authors propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. This database will be searchable and cross-indexed with relevant publications, including published detector descriptions. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This database should eventually contain all published data from Bevalac, AGS and SPS to RHIC and CERN-LHC energies, proton-proton to nucleus-nucleus collisions as well as other relevant systems, and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of old and new experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion and target and source development for upcoming facilities such as the Next Linear Collider. To enhance the utility of this database, they propose periodically performing evaluations of the data and summarizing the results in topical reviews.

We propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. This database will be searchable and cross-indexed with relevant publications, including published detector descriptions. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This database should eventually contain all published data from Bevalac and AGS to RHIC to CERN-LHC energies, proton-proton to nucleus-nucleus collisions as well as other relevant systems, and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of old and new experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion and target and source development for upcoming facilities such as the Next Linear Collider. To enhance the utility of this database, we propose periodically performing evaluations of the data and summarizing the results in topical reviews.

New results from studies of coplanar-grid CdZnTe (CZT) detectors are presented. The coplanar-grid detectors, were investigated by using a highly collimated X-ray beam available at Brookhaven's National Synchrotron Light Source and by applying a pulse-shape analysis. The coplanar-grid detector operates as a single-carrier device. Despite the fact that its operational principle is well known and has been investigated by many groups in the past, we found some new details that may explain the performance limits of these types of devices. The experimental results have been confirmed by extensive computer modeling.

To successfully tune the DARHT II transport beamline requires the close coupling of a model of the beam transport and the measurement of the beam observables as the beam conditions and magnet settings are varied. For the ETA II experiment using the DARHT II beamline components this was achieved using the SUICIDE (Simple User Interface Connecting to an Integrated Data Environment) data analysis environment and the FITS (Fully Integrated Transport Simulation) model. The SUICIDE environment has direct access to the experimental beam transport data at acquisition and the FITS predictions of the transport for immediate comparison. The FITS model is coupled into the control system where it can read magnet current settings for real time modeling. We find this integrated coupling is essential for model verification and the successful development of a tuning aid for the efficient convergence on a useable tune. We show the real time comparisons of simulation and experiment and explore the successes and limitations of this close coupled approach.

We present a multi-parametric experimental investigation of laser conditioning efficiency and behavior in KDP and DKDP crystals as a function of laser wavelength, fluence, number of pulses, and conditioning protocol. Our results expose complex behaviors associated with damage initiation and conditioning at different wavelengths that provide a major step towards revealing the underlying physics. In addition, we reveal the key parameters for optimal improvement to the damage performance from laser conditioning.

We present experimental results aiming to reveal the relationship between damage initiating defect populations in KDP and DKDP crystals under irradiation at different wavelengths. Our results indicate that there is more than one type of defects leading to damage initiation, each defect acting as damage initiators over a different wavelength range. Results showing disparities in the morphology of damage sites from exposure at different wavelengths provides additional evidence for the presence of multiple types of defects responsible for damage initiation.

For experimental campaigns on the National Ignition Facility (NIF) to be successful, they must obtain useful data without causing unacceptable impact on the facility. Of particular concern is excessive damage to optics and diagnostic components. There are 192 fused silica main debris shields (MDS) exposed to the potentially hostile target chamber environment on each shot. Damage in these optics results either from the interaction of laser light with contamination and pre-existing imperfections on the optic surface or from the impact of shrapnel fragments. Mitigation of this second damage source is possible by identifying shrapnel sources and shielding optics from them. It was recently demonstrated that the addition of 1.1-mm thick borosilicate disposable debris shields (DDS) block the majority of debris and shrapnel fragments from reaching the relatively expensive MDS's. However, DDS's cannot stop large, faster moving fragments. We have experimentally demonstrated one shrapnel mitigation technique showing that it is possible to direct fast moving fragments by changing the source orientation, in this case a Ta pinhole array. Another mitigation method is to change the source material to one that produces smaller fragments. Simulations and validating experiments are necessary to determine which fragments can penetrate or break 1-3 mm thick DDS's. …

The effect of solution annealing temperature on the observed corrosion attack mode in Alloy 22 welds was assessed. Three types of specimens were examined, including the as-welded state, solution annealed for 20 minutes at 1121 C, and solution annealed for 20 minutes at 1200 C. The microstructures of the specimens were first mapped using electron backscatter diffraction to determine the grain structure evolution due to solution annealing. The specimens were then subjected to electrochemical testing in a 6 molal NaCl + 0.9 molal KNO{sub 3} environment to initiate crevice corrosion. Examination of the specimen surfaces after corrosion testing showed that in the as-welded specimen, corrosion was present in both the weld dendrites as well as around the secondary phases. However, the specimen solution annealed at 1121 C showed corrosion only at secondary phases and the specimen annealed at 1200 C showed pitting corrosion only in a handful of grains.

Water transport through soft contact lenses (SCL) is important for acceptable performance on the human eye. Chemical-potential gradient-driven diffusion rates of water through soft-contact-lens materials are measured with an evaporation-cell technique. Water is evaporated from the bottom surface of a lens membrane by impinging air at controlled flow rate and humidity. The resulting weight loss of a water reservoir covering the top surface of the contact-lens material is recorded as a function of time. New results are reported for a conventional hydrogel material (SofLens{trademark} One Day, hilafilcon A, water content at saturation W{sub 10} = 70 weight %) and a silicone hydrogel material (PureVision{trademark}, balafilcon A, W{sub 10} = 36 %), with and without surface oxygen plasma treatment. Also, previously reported data for a conventional HEMA-SCL (W{sub 10} = 38 %) hydrogel are reexamined and compared with those for SofLens{trademark} One Day and PureVision{trademark} hydrogels. Measured steady-state water fluxes are largest for SofLens{trademark} One Day, followed by PureVision{trademark} and HEMA. In some cases, the measured steady-state water fluxes increase with rising relative air humidity. This increase, due to an apparent mass-transfer resistance at the surface (trapping skinning), is associated with formation of a glassy skin at the air/membrane interface when …

The costs for carbon dioxide (CO{sub 2}) capture and storage (CCS) in geologic formations is estimated to be $6-75/t CO{sub 2}. In the absence of a mandate to reduce greenhouse gas emissions or some other significant incentive for CCS deployment, this cost effectively limits CCS technology deployment to small niche markets and stymies the potential for further technological development through learning-by-doing until these disincentives for the free venting of CO{sub 2} are in place. By far, the largest current fraction of these costs is capture (including compression and dehydration), commonly estimated at $25-60/t CO{sub 2} for power plant applications followed by CO{sub 2} transport and storage, estimated at $0-15/t CO{sub 2}. Of the storage costs, only a small fraction of the cost will go to accurate geological characterization. These one-time costs are probably on the order of $0.1/t CO{sub 2} or less as these costs are spread out over the many millions of tons likely to be injected into a field over many decades. Geologic assessments include information central to capacity prediction, risk estimation for the target intervals, and development facilities engineering. Since assessment costs are roughly 2 orders of magnitude smaller than capture costs, and assessment products carry other …

A method is presented for using the statistical design of experiment (2{sup k} Factorial Design) technique in the sensitivity analysis of the thermal response (temperature) of the 9975 radioactive material packaging where multiple thermal properties of the impact absorbing and fire insulating material Celotex and certain boundary conditions are subject to uncertainty. 2{sup k} Factorial Design method is very efficient in the use of available data and is capable of analyzing the impact of main variables (Factors) and their interactions on the component design. The 9975 design is based on detailed finite element (FE) analyses and extensive proof testing to meet the design requirements given in 10CFR71 [1]. However, the FE analyses use Celotex thermal properties that are based on published data and limited experiments. Celotex is an orthotropic material that is used in the home building industry. Its thermal properties are prone to variation due to manufacturing and fabrication processes, and due to long environmental exposure. This paper will evaluate the sensitivity of variations in thermal conductivity of the Celotex, convection coefficient at the drum surface, and drum emissivity (herein called Factors) on the thermal response of 9975 packaging under Normal Conditions of Transport (NCT). Application of this methodology …

Theories of evolving quintessence are constructed that generically lead to deviations from the w = -1 prediction of non-evolving dark energy. The small mass scale that governs evolution, m_\phi \approx 10^-33 eV, is radiatively stable, and the"Why Now?'' problem is solved. These results rest crucially on seesaw cosmology: in broad outline, fundamental physics and cosmology can be understood from only two mass scales, the weak scale, v, and the Planck scale, M. Requiring a scale of dark energy \rho_DE^1/4 governed by v^2/M, and a radiatively stable evolution rate m_\phi given by v^4/M^3, leads to a distinctive form for the equation of state w(z) that follows from a cosine quintessence potential. An explicit hidden axion model is constructed. Dark energy resides in the potential of the axion field which is generated by a new QCD-like force that gets strong at the scale \Lambda \approx v^2/M \approx \rho_DE^1/4. The evolution rate is given by a second seesaw that leads to the axion mass, m_\phi \approx \Lambda^2/f, with f \approx M.

A speculative propulsion concept is presented, based on accelerating a spacecraft by impact of a stream of matter in relative motion with respect to the spacecraft. To accelerate the stream to the needed velocity the stream mass is contained in a transit vehicle, launched at low velocity and hence low energy cost, and then sent on a trajectory with near encounters of the planets for gravitational assist. The mass arrives at Earth or wherever the propellant is needed at much higher velocity and kinetic energy, where it is released into an extended stream suitable for propulsion. The stream, moving at a relative velocity in the range of 10 to 30km/s, should be capable of both high thrust and high specific impulse. Means of limiting the transverse expansion of the stream during release and for the {approx}1000 seconds duration of impact are a critical requirement for practicality of the concept. The scheme could potentially lead to a virtually unlimited energy source. One can imagine using a portion of one stream to launch another, larger payload on a similar trajectory. This creates, in effect, an energy amplifier extracting energy from the orbital motions of the planets. The gain of the energy amplifier …

Phase 1 of isotopes in the Project for Intercomparison of Land-surface Parameterization Schemes (iPILPS) compares the simulation of two stable water isotopologues ({sup 1}H{sub 2} {sup 18}O and {sup 1}H{sup 2}H{sup 16}O) at the land-atmosphere interface. The simulations are off-line, with forcing from an isotopically enabled regional model for three locations selected to offer contrasting climates and ecotypes: an evergreen tropical forest, a sclerophyll eucalypt forest and a mixed deciduous wood. Here we report on the experimental framework, the quality control undertaken on the simulation results and the method of intercomparisons employed. The small number of available isotopically-enabled land-surface schemes (ILSSs) limits the drawing of strong conclusions but, despite this, there is shown to be benefit in undertaking this type of isotopic intercomparison. Although validation of isotopic simulations at the land surface must await more, and much more complete, observational campaigns, we find that the empirically-based Craig-Gordon parameterization (of isotopic fractionation during evaporation) gives adequately realistic isotopic simulations when incorporated in a wide range of land-surface codes. By introducing two new tools for understanding isotopic variability from the land surface, the Isotope Transfer Function and the iPILPS plot, we show that different hydrological parameterizations cause very different isotopic responses. We …

Deposition of maximum laser energy into a small, high-Z enclosure in a short laser pulse creates a hot environment. Such targets were recently included in an experimental campaign using the first four of the 192 beams of the National Ignition Facility [J. A. Paisner, E. M. Campbell, and W. J. Hogan, Fusion Technology 26, 755 (1994)], under construction at the University of California Lawrence Livermore National Laboratory. These targets demonstrate good laser coupling, reaching a radiation temperature of 340 eV. In addition, the Raman backscatter spectrum contains features consistent with Brillouin backscatter of Raman forward scatter [A. B. Langdon and D. E. Hinkel, Physical Review Letters 89, 015003 (2002)]. Also, NIF Early Light diagnostics indicate that 20% of the direct backscatter from these reduced-scale targets is in the polarization orthogonal to that of the incident light.

None