Summary: "This report investigates photographic methods of measuring beta radiation and includes a study of temperature effects on these measurements. Experimental data are submitted to show that an increase in film temperature before and during beta irradiation causes a definite increase in density for the same dosage. Recommendations drawn from experience gained in the experimental works are offered."

The following report provides the results of laboratory corrosion tests held to investigate the behavior of austenitic stainless steel, Type 347, in selected O.R.N.L. #1 Redox streams.

From introduction: This report describes the program of research on mineralogy and petrography of certain uraniferous vein deposits in the Boulder batholith of western Montana.

This is the fourth quarterly report that documents a system of mass flow that can record measurements of homogeneous flow, slurries, highly corrosive fluids and multiphase fluids, additionally considering pressure drops, measuring external to the flow, ruggedness and reliability.

Abstract: "Four brazing methods and one other joining process were evaluated for the joining of aluminum spacer fins to flat-plate aluminum-clad fuel elements. None of these methods appear completely suitable for use in a mass-production operation. Furnace brazing and salt-bath brazing were most promising. However, the mechanical problems involved in the application of either process deter their recommendation. Resistance brazing and torch-brazing were proven impractical. The great difference in mass between the two pieces being joined prevents the use of either the resistance or torch method. Pressure bonding is not applicable because of the excessive deformation of parts being joined."

Quarterly progress report describing work related to a study of radiation physics problems involved in the design of high-level cesium-137 gamma sources. It outlines work completed and ongoing goals for the project.

This report studies tritium oxides and tritium in water vapor, a product of P-10.

This report reviews aspects of experimental and clinical research performed in the investigation on the pathogenesis and recovery of bone marrow injury caused by total body irradiation.

Abstract: "A theoretical criterion is given for the conditions under which the ions from an ion source may be decelerated by a decelerating grid, following the accelerating grid which extracts ions from the emitter, without causing a reduction in the current supplied by the source."

Abstract: "A torus model of the elementary particles is suggested in which the electron and proton are made stable by gravitational forces derived from the electromagnetic field. It is suggested that the gravitational forces for the unstable particles, presumably the mesons, are not sufficient to keep the torus from expanding in the direction of its large radius. Rest energy zero can be achieved, presumably for photons and neutrons, when the gravitational energy and electromagnetic field energy are equal in magnitude. The manner in which these models can exhibit spin, magnetic moment, wave length, and phase velocity is indicated. The origin of nuclear forces from an electromagnetic basis is indicated."

From introduction: A subsurface exploration program was undertaken to investigate the concentration of uranium and vanadium in or near the base of the Shinarump member of the Chinle formation in the Flatirons locality, and to develop criteria whereby adjacent unexplored areas could be evaluated as to potential production capacity from study of geological and mineralogical features at the host rook outcrop. An earlier study of the area by C. G. Evensen of the U. S. Atomic Energy Commission had shown that geological conditions favorable to the accumulation of commercial uranium deposits were present in the Flatirons area.

Abstract: The Trans-Pecos region of southwest Texas is noted for the production of quicksilver, lead, silver, and copper from its several mining districts. Reconnaissance, which was concentrated in and around these districts, revealed many areas of slightly abnormal radioactivity. Only a few areas, however, showed uranium mineralization.

Cost estimates for two types of Th producing plants are offered. One utilizes Th(NO3)4 as raw material, the other uses monazite sand. Final processing schemes and plant designs are not fixed, so the estimates represent maximum costs. Recommendations for research and development of Th producing methods are given.

Abstract. a method of recovering thorium from slag from the bomb process of producing thorium has been developed. HCl and NaOH are the only chemicals required in quantity. Materials required for a representative slag are given.

Technical report that attempts to bring together the various chemical procedures which proved most useful in studying the results of cyclotron bombardment or small scale neutron bombardments of heavy element targets. The report is limited to the elements of the "actinide", or second rare earth series, starting with thorium and including the newly discovered elements of atomic number 95 and 96. Every attempt is made to include all details necessary so this report can serve as a practical laboratory guide. The report covers separation problems, time factors, and dealing with dangerously radioactive targets.

From introduction: "This article constitutes the third of a series of three papers on the "direct" measurements of the meson masses by the "Hp vs. Range" mass ratio method...The study here reported is a logical extension of the pion-proton mass ratio technique."

The following report analyzes results from studies made while applying chelating agents to ion exchange separations of the elements americium and curium.

"This is a selective bibliography of books and periodical articles relating to extrusion die design with special emphasis on extrusion of beryllium. Material on the extrusion process has been included when it contains information that might be of possible help in die designing."

Summary: The on-site radiological support program for Project Sedan was established to assist in exclusion area control, to ninimize the radiation exposure of participating personnel and observers, and to prevent the spread of radioactive contamination.

The preliminary process design of a PRFR pilot leaching plant, which is proposed to be located in Cell B of Building ORNL, is considered. Chemical, physical, and nuclear parameters are investigated in order that the leaching operations may be carried out without any chemical or nuclear hazards.

The Turco 4501 process is recommended for the decontamination of the PRFR pilot leaching plant equipment. The caustic-tartrate-nitric acid process is recommended for the decontamination of the cell and the equipment exterior.

Discussing recommendations for wagon drilling in the Temple Mountain District, Utah

This report describes the Temple Mountain district in Utah, specifically four Shinarump-capped areas that are recommended for ore mining.

The nil-ductility-transition (NDT) temperature, as defined by the Naval Research Laboratory drop-weight test, was determined on the A212B carbon-silicon steel used in the pressure vessel of the N. S. Savannah nuclear reactor. Correlations were made with the Charpy-V-notch impact energy at NDT. Specimens taken at two different thickness location from materials used in the upper closure head of the reactor vessel yielded NDT temperatures of 0 - 20°F which correspond to Charpy-V-notch impact energies of 11-19 ft-lb. Testing of as-received material used in the lower closure head indicated that the NDT temperature was 50°F which was equivalent to an average Charpy-V-notch impact energy of 12 ft-lb. After normalizing and stress-relieving this material, in order to more closely approximate the final condition of the reactor vessel, NDT was reduced to less than 10°F.