From Introduction: "The results of two phases of this investigation, presented in references 1 and 2, have indicated possible ways of reducing hull drag without causing large changes in aerodynamic stability and hydrodynamic performance."

Report presenting an investigation of a series of flame holders designed with the objective of providing a high combustion efficiency in a ramjet combustor at an inlet air velocity of 200 feet per second, inlet-air pressure of 60 inches of mercury absolute, inlet air temperature of 200 degrees Fahrenheit, and near stoichiometric fuel-air ratio. Results regarding the preliminary experiments, two parallel rows of gutters, three rows of gutters, staggered gutters, simultaneous use of three rows and staggered gutters, use of molybdenum, and magnitude of pressure fluctuations are provided.

Report presenting an investigation of several aileron modifications in conjunction with a tapered, sweptback wing with circular-arc airfoil sections of relatively large thickness ratio. This testing permits the evaluation of the wing-aileron rolling effectiveness over a range of Mach numbers. Results regarding true-contour ailerons, extended-chord ailerons, and blunt trailing-edge ailerons are provided.

Memorandum presenting an investigation to determine the automatic lateral stability characteristics of a model equipped with a gyro stabilizing unit that gave response to bank and yaw. Stable flights were obtained with the flicker-type automatic control, and the amplitude of the oscillations was decreased by adding the attachment which provided hunting control.

Report presenting an investigation to determine the aerodynamic characteristics of a wing with a leading sweptback edge at 47.5 degrees and a 20-percent-chord, 50-percent-span outboard aileron. The wing had symmetrical circular-arc airfoil sections and was tested with a circular-arc contour aileron and a flat-sided contour aileron with finite trailing-edge thickness. The longitudinal aerodynamic characteristics and aileron effectiveness are provided for both types of ailerons.

From Introduction: "The purpose of the present paper is to summarize the available data on the effects of wing-fuselage-tail and wing-nacelle interference on the distribution of the air load among aircraft components. Some discussion is also given of the effects of center-of-gravity position."

The J33-A-27 compressor was operated at an inlet pressure of 14 inches of mercury absolute and ambient inlet temperature over a range of equivalent impeller speeds from 6100 to 11,800 rpm. At the design equivalent speed of 11,800 rpm, the J33-A-27 compressor had a peak pressure ratio of 4.40 at an equivalent weight flow of 105.7 pounds per second and a peak adiabatic temperature-rise efficiency of 0.745. The maximum equivalent weight flow at design speed was 113.5 pounds per second.