Report presenting the tracking performance of an automatically controlled interceptor in which the deflection channel incorporated a bank-angle-error computer that commanded rolling velocities of the interceptor proportional to the computed bank-angle errors. Results regarding gravity terms included in bank-angle-error computation and a comparison of modified system using bank-angle-error computer with the prototype system are provided.

Report presenting an investigation at Mach number 1.91 to determine the gross spreading characteristics of jets expanding from convergent and convergent-divergent nozzles using total-temperature surveys. Results regarding the preliminary development and jet spreading characteristics of the different types of nozzles are provided.

Report discussing tests of a model of a B-36J/RF-84F tip-coupled airplane to evaluate the flutter characteristics where bomber-body freedoms are allowed and to obtain information about the dynamic stability characteristics. The variables studied were the skew angle of the fighter-bomber coupling, the fighter longitudinal position, the fighter and bomber loading, angle of sideslip, degrees of body freedom, and number of fighters. Flutter was primarily found to occur when the fighter roll frequency was near the natural chordwise-bending frequency of the bomber wing.

Memorandum presenting an investigation of the theoretical performance of a two-stage ballistic rocket missile with a centerbody and two parallel boosters for JP4-oxygen and ammonia-fluorine propellants. The missile using the ammonia-fluorine propellant weighs about one-half as much as a missile using JP4-oxygen. Results regarding the optimum missile and effect of variation of design parameters are provided.

From Introduction: "The importance of blunt noses as a means of reducing the heat transfer to high velocity missiles has recently received much publicity. The question of just what blunt shape is best is still moot, and it is the purpose of this paper to present and examine some recent experimental results which may throw some light on this problem."

"A ram-jet engine with an experimental 48-inch-diameter combustor was investigated in a free-jet facility. The combustor design comprised a large-volume annular pilot region and an array of sloping baffle- or gutter-type flameholders. The combustor was intended to operate at a fuel-air ratio of about 0.037" (p. 1).

Report presenting an investigation of the low-speed, power-off stability and control characteristics of a model of the McDonnell XF3H-1 airplane. Flight testing occurred in the clean and slat- and flaps-extended conditions over a range of lift coefficients.

Report presenting flight testing on models of the proposed Consolidated Vultee Aircraft Corporation MX-1626 airplane with nacelles and without nacelles. Results regarding drag level, design modifications, dampening, trimming, and the use of ventral boosters are provided.

Memorandum presenting net jet thrusts for stoichiometric hydrocarbon-air, hydrogen-air and pentaborane-air mixtures for equilibrium and frozen expansion in the exhaust nozzle at flight Mach numbers up to 10. Net jet thrusts for equilibrium flow were three to five times that for frozen flow at Mach 10 for the three fuels cited, a hydrocarbon, hydrogen, and pentaborane. Results regarding dissociation energies, reaction rate, residence time, and estimated minimum performance are provided.

Free jet tests of 48 inch diameter ramjet combustor with annular can-type flame holder.

"Results are presented of a free-flight investigation between Mach numbers of 0.7 to 1.3 and Reynolds numbers of 3.1 x 10(exp 6) to 7.0 x 10(exp 6) to determine the longitudinal aerodynamic characteristics of the Northrop MX-775A missile. This missile has a wing, body, and vertical tail, but has no horizontal tail. The basic wing plan form has an aspect ratio of 5.5, 45 deg of sweepback of the 0.406 streamwise chord line, and a taper ratio of 0.4" (p. 1).

Report presenting an investigation of a model of the Bumblebee XPM missile to determine the causes of booster-fin failures for a range of Mach numbers and Reynolds numbers. The cause of fin failure was determined to be the launching shoes that caused the missiles to trim at increasingly negative angles of attack. Additional testing with wing spoilers and alternate booster fins was also conducted.

Report presenting an investigation conducted on a full-scale afterburner and turbojet engine to determine the effect of pressure level on afterburner-wall temperature. For a given ratio of cooling airflow to afterburner gas flow, the afterburner-wall temperature increased as afterburner-outlet pressure was increased. The results indicated that heat transfer by luminous radiation was not significant any pressure level investigated.

Memorandum presenting an investigation of the effect of base bleed on the base force of a supersonic-interceptor model in the 8- by 6-foot supersonic wind tunnel. Generally, base pressures greater than ambient were obtained at the engine operating pressure ratios of the primary nozzle.

Sea-level static testing of turbojet engine afterburner.