This paper describes simulation and experimental results for a 1400A, {+-} 900V peak rated, switch mode power supply for SNS Injection Kicker Magnets. For each magnet (13 m{Omega}, 160{micro}H), the power supply must supply controlled pulses at 60 Hz repetition rate. The pulse current must rise from zero to maximum in less than 1 millisec in a controlled manner, flat top for up to 2 millisec, and should fall in a controlled manner to less than 4A within 500{micro}s. The low current performance during fall time is the biggest challenge in this power supply. The simulation results show that to meet the controlled fall of the current and the current ripple requirements, voltage loop bandwidth of at least 10 kHz and switching frequency of at least 100 kHz are required. To achieve high power high frequency switching with IGBT switches, a series connected topology with three phase shifted (O{sup o}, 60{sup o} & 120{sup o}) converters each with 40 kHz switching frequency (IGBT at 20kHz), has been achieved. In this paper, the circuit topology, relevant system specifications and experimental results that meet the requirements of the power supply are described in detail. A unique six pulse SCR rectifier circuit with …

The systematic requirements to divert an object on an earth-impacting course are developed relating the minimum velocity perturbation (both magnitude and direction) to the time available before impact. This, coupled with the accuracy to which orbits can be determined, restricts the time available for any mitigation technology to operate. Because nuclear energy densities are nearly a million times higher than those possible with chemical bonds, it is the most mass efficient means for storing delivering energy with today's technology. The question is how to most effectively apply that energy. This paper will examine the simple case of shattering the body, as well as a more controlled approach in which one or more small velocity increments divert a body. The optimal approach depends on the detailed circumstances, but in either case, already developed technology permits a successful diversion with a few years to decades of notice. The success of nuclear options on relatively short timescales permits consideration of other technologies that while not so well developed might be sufficiently improved to divert small (100 meter) bodies.

Daily newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.

Weekly newspaper from Alvin, Texas that includes local, state, and national news along with advertising.

This report tracks the progress of the bill providing FY2004 appropriations for the Departments of Labor, Health and Human Services, and Education, and Related Agencies (L-HHS-ED). This report summarizes L-HHS-ED discretionary funding issues but not authorization or entitlement issues.

Weekly newspaper from Holliday, Texas that includes local, state, and national news along with advertising.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

The Spallation Neutron Source accelerator systems will provide a 1 GeV, 1.44 MW proton beam to a liquid mercury target for neutron production. Beam tuning dumps are provided at the end of the linac (the Linac Dump) and in the Ring-to-Target transport line (the Extraction Dump) [1]. Thin windows are required to separate the accelerator vacuum from the poor vacuum upstream of the beam dump. There are several challenging engineering issues that have been addressed in the window design. Namely, handling of the high local power density deposited by the stripped electrons from the H-beam accelerated in the linac, and the need for low-exposure removal and replacement of an activated window. The thermal design of the linac dump window is presented, as is the design of a vacuum clamp and mechanism that allows remote removal and replacement of the window.

The Congressional Budget Office’s (CBO) January 2004 budget report for FY2005 (the Budget and Economic Outlook: Fiscal Years 2005-2014) estimated the FY2005 baseline deficit at $362 billion, not much different from that proposed by the Administration. Selected alternative policies included in the CBO report, estimates for the cost of extending the tax cuts, reforming the AMT, and letting discretionary spending grow at the rate of gross domestic product (GDP) growth, would increase the deficit, particularly in the years beyond FY2009.

Point defects are induced in high quality optical-grade fused silica by high fluence (>30 J/cm{sup 2}) 355nm laser pulses. The microscopic depth distribution of laser irradiation induced defects has been nondestructively determined using Cathodoluminescence (CL) microanalysis. CL emissions have been observed at 1.9eV, 2.2eV, 2.7eV and 4.4eV. In addition following CO{sup 2} laser treatment for damage mitigation an emission at 3.2eV is also observed. The CL emissions have been identified with the NBOHC (non-bridging oxygen hole center), the STE (self-trapped exciton), an ODC (oxygen-deficient center) and an aluminum impurity centre. The spatially resolved CL data is consistent with damage initiation at the exit surface. The concentration of 355 nm laser induced defects is greatest at the surface and monotonically decays to pre-irradiation levels at {approx}10 {micro}m depth below the surface. With CO{sup 2} processing to mitigate damage, the defect concentration and spatial distribution is reduced to a maximum depth of {approx}6{micro}m. CL microanalysis provides a sensitive and nondestructive method of assessing the magnitude and submicron distribution of irradiation induced damage in technologically important materials.

Weekly newspaper from Rusk, Texas that includes local, state and national news along with extensive advertising.

China has ambitious goals for economic development, and mustfind ways to power the achievement of those goals that are bothenvironmentally and socially sustainable. Integration into the globaleconomy presents opportunities for technological improvement and accessto energy resources. China also has options for innovative policies andmeasures that could significantly alter the way energy is acquired andused. These opportunities andoptions, along with long-term social,demographic, and economic trends, will shape China s future energysystem, and consequently its contribution to emissions of greenhousegases, particularly carbon dioxide (CO2). In this study, entitled China sSustainable Energy Future: Scenarios of Energy and Carbon Emissions, theEnergy Research Institute (ERI), an independent analytic organizationunder China's Na tional Development and Reform Commission (NDRC), soughtto explore in detail how China could achieve the goals of the TenthFive-Year Plan and its longer term aims through a sustainable developmentstrategy. China's ability to forge a sustainable energy path has globalconsequences. China's annual emissions of greenhouse gases comprisenearly half of those from developing countries, and 12 percent of globalemissions. Most of China's greenhouse gas emissions are in the form ofCO2, 87 percent of which came from energy use in 2000. In that year,China's carbon emissions from energy use and cement production were 760million metric tons (Mt-C), …

Weekly newspaper from The Colony, Texas that includes local, state, and national news along with advertising.

The Spallation Neutron Source (SNS) accelerator systems will provide a 1 GeV, 1.44 MW proton beam to a liquid mercury target for neutron production. In order to satisfy the accelerator systems' portion of the Critical Decision 4 (CD-4) commissioning goal (which marks the completion of the construction phase of the project), a beam pulse with intensity greater than 1 x 10{sup 13} protons must be accumulated in the ring, extracted in a single turn and delivered to the target. A commissioning plan has been formulated for bringing into operation and establishing nominal operating conditions for the various ring and transport line subsystems as well as for establishing beam conditions and parameters which meet the commissioning goal.

Collective interactions of the beam with itself and with its periodic lattice surroundings in high intensity accelerator rings, such as PSR and SNS, can lead to beam growth, halo generation, and losses. These interactions also provide a rich source of dynamic phenomena for analytical, computational, and experimental study. With continuing increases in model development and computer power, a number of sophisticated codes are now capable of detailed realistic studies of collective beam dynamics in rings. We concentrate here on a computational examination of high intensity beam dynamics in SNS. These studies include the effects of the accelerator lattice, space charge, impedances, losses and collimation, and magnet errors.

In response to concerns expressed by the California Legislature and the citizenry of the State of California, the State Water Resources Control Board (SWRCB), implemented a program to assess groundwater quality, and provide a predictive capability for identifying areas that are vulnerable to contamination. The program was initiated in response to concern over public supply well closures due to contamination by chemicals such as MtBE from gasoline, and solvents from industrial operations. As a result of this increased awareness regarding groundwater quality, the Supplemental Report of the 1999 Budget Act mandated the SWRCB to develop a comprehensive ambient groundwater-monitoring plan, and led to the initiation of the Ambient Groundwater Monitoring and Assessment (GAMA) Program. The primary objective of the GAMA Program is to assess the water quality and to predict the relative susceptibility to contamination of groundwater resources throughout the state of California. Under the GAMA program, scientists from Lawrence Livermore National Laboratory (LLNL) collaborate with the SWRCB, the U.S. Geological Survey, the California Department of Health Services (DHS), and the California Department of Water Resources (DWR) to implement the groundwater assessment program in cooperation with local water purveyors. In 2001 and 2002, LLNL carried out this vulnerability study in …

We contacted 125 scientists, ethicists, legal scholars, social scientists and informal science educators to participate in a short survey designed to identify critical issues related to nanotechnology. Fifty-six (45%) responded positively, and 46 completed the survey. We then conducted a series of interviews and site visits based on scientific area, and regional representation. Key points are summarized in the attached table. Based on the results of our surveys, we were able to construct three strong areas of ethical, legal, social, and environmental issues around which to build socratic dialogs in a standard Fred Friendly Seminar format. We were also able to identify 4 science center/museum partnerships and a proposal has been submitted to NSF's NISE Program. We are preparing to submit proposals to other agencies and foundations for support.

Weekly newspaper from Cuero, Texas that includes local, state, and national news along with advertising.

The primary focus of this 3-year project was to develop and put to use an instrument to test experimentally the effect of pressure on body centered cubic (BCC) metals and other materials of interest to the Stockpile Stewardship program. Well-resolved materials testing requires measurements of load and deformation rate be measured at separable conditions of temperature, pressure, and plastic strain. The new apparatus at the heart of this work, the Deformation-DIA (D-DIA), began the project as a design concept. Its principal feature would be the capability to extend the conditions for such controlled materials testing from the current pressure limit of about 3 to almost 15 GPa, a factor of 5 increase. Once constructed and successfully tested, the plan of the project was to deform samples of BCC metals at arbitrary temperature and high pressures in order to provide preliminary measurements of strength and to prove its worth to the Stockpile Stewardship program. The project has been a stunning success. Progress toward demonstrating the worth of the D-DIA as a workhorse instrument for materials strength measurement at high pressure was given a huge boost by the fact that the machine itself functioned flawlessly from the very start, allowing the investigators …

This report provides a background and analysis comparing military commissions as envisioned under Military Commission Order (M.C.O.) No. 1 and general military courts-martial conducted under the Uniform Code of Military Justice (UCMJ). The report notes some of the criticism directed at the President's Military Order (M.O.), and explains how those concerns are addressed by the military commission orders and instructions. The report concludes by summarizing legislation introduced to authorize and regulate military tribunals to try suspected Al Qaeda and Taliban members, and provides two charts to compare the proposed military tribunals under proposed legislation, the regulations issued by the Department of Defense, and standard procedures for general courts-martial under the Manual for Courts-Martial.

This report provides a background and analysis comparing military commissions as envisioned under M.C.O. No. 1 to general military courts-martial conducted under the UCMJ. The report notes some of the criticism directed at the President’s M.O., and explains how those concerns are addressed by the military commission orders and instructions. The report provides two charts to compare the regulations issued by the Department of Defense and standard procedures for general courts-martial under the Manual for Courts-Martial. The second chart, which compares procedural safeguards incorporated in the regulations with established procedures in courts martial, follows the same order and format used in CRS Report RL31262, Selected Procedural Safeguards in Federal, Military, and International Courts, in order to facilitate comparison with safeguards provided in federal court and the International Criminal Court.

This report provides a background and analysis comparing military commissions as envisioned under M.C.O. No. 1 to general military courts-martial conducted under the UCMJ. The report notes some of the criticism directed at the President’s M.O., and explains how those concerns are addressed by the military commission orders and instructions. The report provides two charts to compare the regulations issued by the Department of Defense and standard procedures for general courts-martial under the Manual for Courts-Martial. The second chart, which compares procedural safeguards incorporated in the regulations with established procedures in courts martial, follows the same order and format used in CRS Report RL31262, Selected Procedural Safeguards in Federal, Military, and International Courts, in order to facilitate comparison with safeguards provided in federal court and the International Criminal Court.

The goal of this research is to design, build and test a phoswich-based radiation detector for simultaneously monitoring all radioactive components in the effluent resulting from the cleanup of nuclear waste

Commercial building retrocommissioning activity has increased in recent years. LBNL recently conducted a study of 8 participants in Sacramento Municipal Utility District's (SMUD) retrocommissioning program. We evaluated the persistence of energy savings and measure implementation, in an effort to identify and understand factors that affect the longevity of retrocommissioning benefits. The LBNL analysis looked at whole-building energy and the retrocommissioning measure implementation status, incorporating elements from previous work by Texas A&M University and Portland Energy Conservation Inc. When possible, adjustments due to newly discovered major end uses, occupancy patterns and 2001 energy crisis responses were included in the whole-building energy analysis. The measure implementation analysis categorized each recommended measure and tracked the measures to their current operational status. Results showed a 59% implementation rate of recommended measures. The whole-building energy analysis showed an aggregate electricity savings of approximately 10.5% in the second post-retrocommissioning year, diminishing to approximately 8% in the fourth year. Results also showed the 2001 energy crisis played a significant role in the post-retrocommissioning energy use at the candidate sites. When natural gas consumption was included in the analysis, savings were reduced slightly, showing the importance in considering interactive effects between cooling and heating systems. The cost effectiveness …