Abstract: Various procedures for extracting uranium from fiberglass air filters have been tested and compared. Satisfactory results which involve the least amount of handling are obtained by simply washing the material with hot 1:1 hydrochloric acid.

The Eyewash program, written by James H. Alexander and Nancy D. Given, provides solutions of reactor criticality problems in spherical geometry by means of the group diffusion method. It employs thirty lethargy groups (plus one thermal group) in nine regions. The input consists principally of specifying the geometrical scaling factor, boundaries and compositions of the various regions, and temperature level. The output includes the value of vc that would render the system critical, the relative fission density distribution, fissions, absorptions, and leakages in each lethargy group in each region, and, if desired, an edit of the flux at each space point, each lethargy, and an edit of the macroscopic cross sections for each lethargy, each region. OCUSOL-A is a minor modification and extension of Eyewash. It provides for the computation and editing, on the supervisory control typewriter, of the total absorptions in selected nuclides in the various regions. This information is useful in the computation of breeding ratios and the preparation of detailed neutron balances, and in the estimation of flux-averaged cross sections for use in estimating the rate of change of concentration of the various nuclides with burn-up. The program also provides for saving and transferring the final fission …

The raw materials and fabrication procedures employed in preparing thirty two zirconium alloy compositions for evaluation as described in GEAP-3979 are reported. Considerations involved in the extension of reported laboratory procedures to larger scale production are discussed.

The following report analyzes various experiments made to discover factors that may affect properties of extruded compacts of crystal bar zirconium.

There is a continuing high interest in the development of organic coolant technology for application to future Hanford reactors. In addition to the HAPO organic program, two other programs are being sponsored by the Atomic Energy Commission. These include the Naval Reactor program, aimed at a reactor for ship propulsion, and the Civilian Power Reactor program. Because of the similarity of the technical efforts in the three programs, an attempt is being made to establish effective liaison among the programs. To this end, a visit was made to several sites actively engaged in organic development work. These sites and their primary functions are detailed in this report.

Introduction. the conventional procedures of analysis for uranium and manganese can be employed in the analysis of alloys of these metals. The alloys are reacted with perchloric acid and hydrogen peroxide, fumed to remove any chloride ions, diluted to volume and aliquots analyzed by redoximetry.

Introduction. It has been known for a long time that thorium is precipitated by oxalic acid in acid solutions, but a survey of the literature showed no study of the limits of the acidity and oxalic acid excess which yield quantitative results. V. I. Spitzin reports on the solubility of thorium oxalate in varying concentrations of several acids, but the effect of an excess oxalic acid is not included. Since solutions are sometimes presented for analysis that contain more than the recommended two per cent mineral acid, it would be advantageous to be able to quantitatively remove the thorium without otherwise altering the solutions. This was especially of interest in solutions containing bismuth, since it was hoped that some amounts of thorium could be precipitated in nitric acid solutions containing large quantities of bismuth. In removing the bismuth, first by a bismuth oxychloride precipitation, thee is every opportunity for carrying of the thorium.

aluminum has been considered as a material for cladding fuel elements to be used in reactors cooled by high-temperature recirculating water. Aluminum is abundant, chap, has a relatively low cross section for thermal neutrons, and is readily fabricated into complex shapes. For these reasons, it appears that the use of aluminum rather than steel, Zircaloy or other candidate materials for fuel element cladding, would result in considerable savings in operating expense. The actual economics will of course depend on specific factors such as core materials and design of the reactor/. Aluminum appears particularly attractive for cladding the cores of aluminum-plutonium alloy proposed for the Plutonium Recycle Test Reactor since, in this case, the physical characteristics of the core and cladding would be practically identical.

The following report discusses an equation derived by which the maximum allowable concentration in the atmosphere of a beta-omitting isotope for which lung damage is the limiting consideration can be calculated.

This report provides an overview of the creation of the Liquid Metal Fuel Reactor Experiment program. It furthers the work by constructing a single loop to test all the components required for the 16 loop reactor. This utility loop was also constructed to provide a facility for testing various components such as valves and flow meters.

The use of a reactor charged with silver nitrate coated packing for removal of radio-iodine from the waste gases of Hanford chemical processing plants has been successful in removing approximately 99.5 percent of this activity. Studies by the Radiological Sciences Department indicated the desirability of further reducing the amount of radio-iodine released to the atmosphere. Therefore, this study was undertaken with the objectives of better understanding the inherent limitations to iodine removal by reaction with silver nitrate, and improving the efficiency of removal of iodine.

From introduction: "The concluding remarks of the report on the electron diffraction study of UF6 suggest two alternate explanations for the apparent discrepancy between the structure proposed for this compound as deduced from X-ray diffraction work on single crystals and from the electron diffraction investigation of the vapor. The second explanation is based on the premise that the difference may be due to essentially unlike methods of treating the diffraction data. In this report we shall analyze X-ray powder photographs following a scheme parallel to that used in the analysis of the electron diffraction data, to check whether this particular explanation is tenable."

The Homogeneous Reactor Test (HRT) is the experimental reactor facility (Frontispiece) being designed and constructed at ORNL as the next step in homogeneous reactor development between the 1-Mv HRE and a "full-scale" power station. The HRT will provide an integrated test at 5 to 10 Mv for the flowsheet and equipment designs on which the full-scale effort will be based. Furthermore, its design is such that several homogeneous systems which require essentially the same operating equipment may be tested with comparatively minor modifications of the original reactor installation. The reactor will be assembled in the building which housed the HRE, located in the experimental reactor exclusion area approximately one mile south of the oak ridge laboratory. (See figure 1) / It is the purpose of this report to provide information with which the hazardous aspects of this reactor may be evaluated. Briefly, it will be shown after a statement of purpose and a general description of the reactor that: 1. The design characteristics and equipment requirements are such that escape of highly reactive material from the reactor piping is unlikely. 2. Should the entire core and blanket contents suddenly escape from the reactor system, a seal-welded steel tank surrounding the …

A method for determining zirconium in plutonium-zirconium alloys was required as part of an investigation of alloys containing fissionable material, with possible use in nuclear reactors. Alloys of these two elements were brought into solution with a bisulfate fusion and the zirconium was separated by precipitation with p-bromomandelic acid. Determinations were completed by weighing the zirconium oxide obtained after ignition of the precipitate at 925 degree C. The precision of this recommended procedure was estimated in terms of the standard deviation for quadruplicate determinations, made with weight aliquots from dissolved alloy samples. The range for the standard deviation was 0.5 to 1.7 parts per thousand for samples from which aliquots each containing 9 to 15 mg of zirconium were selected. The complete recovery of zirconium from solutions of pure zirconyl chloride and plutonium trichloride was shown by the 95 percent confidence limits of 99.9 +- 0.3 percent for the average of four determinations, observed with samples containing 5 to12 mg of zirconium in the presence of 10 to 20 mg of plutonium. It was found the Mo, La, PU(III), and K2Cr2O7 do not interfere with zirconium determinations made according to the recommended procedures, but Pu(IV) does interfere slightly. It was …

Abstract: "The cross section for this reaction is calculated for three Hulthen deuteron wave functions. A hard core in the deuteron at one-half meson Compton wavelength reduces the total cross section and flattens the angular distribution in the backwards direction in agreement with experiment."

An abrasive cutoff machine design, based upon a previous model, (1) was undertaken to provide for the sampling of radioactive material. the design objective was; first, to provide samples for metallographic examination, second, to provide samples for physical and mechanical property testing, and, third, to meet the following design requirements: 1. Remote operation. 2. Airborne contamination control. 3. Radioactive waste collection. 4. Remote maintenance.

This quarterly progress report details ongoing work at the Oak Ridge National Laboratory as part of the Aircraft Nuclear Propulsion Project. Topics of discussion include reactor theory and design, shielding research, materials research, appendixes with information on ongoing analytical chemical studies.

As there is no accurate measurements of the energy distribution of neutrons emerging from large uranium blocks, it becomes of importance to see how much information of this kind can be derived from the slowing down distribution of the neutrons in a water tank.

The following report describes the methods of chemical conversion of uranium fluoride to uranium trioxide.

Nitrate contained in raffinates from Canadian Blind River mills interferes seriously with thorium extraction by secondary amines. With primary amines, however, the effect is negligible and these compounds are the preferred process extractants.

Leaching investigations on low grade Belgian Congo uranium ores and recovery of uranium from acid leach solutions by uranous phosphate precipitation, uranyl phosphate precipitation and by sodium carbonate retreatment of alkali precipitates are described.

A repeatable technique for preparation of thin, self-supporting copper films has been developed at the Lawrence Radiation Laboratory in Livermore, California. The process, done in a vacuum chamber, involves evaporation of copper by electron bombardment, and deposition of the copper on a detergent-coast glass substrate. The copper film is later removed from the substrate by immersion in water.

This is a report of work completed during the period October 1, 1961, to December 31, 1961. The Program fuel element was completed and assembled. After extensive analysis, it was concluded that the fuel was satisfactory for use in the Program.

A resin-in-pulp process was developed using a series of fixed-screen or Winchester cells. Various laboratory and pilot plant models were constructed and tested under simulated plant conditions. The fixed-screen device proved very effective in the recovery of uranium and/or vanadium by a continuous, resin-in-pulp process.