Description of cooling, shielding, controls are discussed for 100 kw and 1 Mw operation of a low cost experimental neutron chain reactor.

Abstract: Various procedures for extracting uranium from fiberglass air filters have been tested and compared. Satisfactory results which involve the least amount of handling are obtained by simply washing the material with hot 1:1 hydrochloric acid.

Report presenting a comparison of three hypervelocity vehicles: a ballistic rocket, a skip rocket, and a rocket glider. Range efficiency, automatic heating, and problems of glide rockets are explored.

From Summary: "Experimental force, moment, and center-of-pressure variations for a large number of bodies of revolution have been compared with the calculated characteristics based on the approximate theory developed in NACA-RM-A9I26. The bodies varied in fineness ratio from 4.5 to 21.1, from blunt unboattailed bodies to airship hulls, and the experimental results are given for widely varying Mach number ranges of angle of attack. It is shown that the lift and drag characteristics are fairly accurately predicted by the theory but that the actual center of pressure is more rearward than the theory indicates."

Unit developed at Knolls Atomic Power Laboratory for extraction and overcomes the disadvantages of the batch countercurrent units currently in use.

Memorandum presenting flight tests conducted on two straight-wing jet airplanes of generally similar configuration, one exhibiting a diving tendency and the other a climbing tendency, in order to investigate the cause for the particular type of behavior of each airplane at high Mach numbers. The results showed that the diving tendency experienced by the one airplane was due to the predominant effect of an increased angle of attack of the horizontal tail.

The raw materials and fabrication procedures employed in preparing thirty two zirconium alloy compositions for evaluation as described in GEAP-3979 are reported. Considerations involved in the extension of reported laboratory procedures to larger scale production are discussed.

The following report analyzes various experiments made to discover factors that may affect properties of extruded compacts of crystal bar zirconium.

There is a continuing high interest in the development of organic coolant technology for application to future Hanford reactors. In addition to the HAPO organic program, two other programs are being sponsored by the Atomic Energy Commission. These include the Naval Reactor program, aimed at a reactor for ship propulsion, and the Civilian Power Reactor program. Because of the similarity of the technical efforts in the three programs, an attempt is being made to establish effective liaison among the programs. To this end, a visit was made to several sites actively engaged in organic development work. These sites and their primary functions are detailed in this report.

Report presenting an investigation of an NACA submerged inlet operating over a range of mass-flow ratios and oncoming flow angles through a range of Mach numbers by use of a transonic bump. Results regarding the ram-recovery ratio, pressure distributions, and tuft studies are provided.

Introduction. the conventional procedures of analysis for uranium and manganese can be employed in the analysis of alloys of these metals. The alloys are reacted with perchloric acid and hydrogen peroxide, fumed to remove any chloride ions, diluted to volume and aliquots analyzed by redoximetry.

Introduction. It has been known for a long time that thorium is precipitated by oxalic acid in acid solutions, but a survey of the literature showed no study of the limits of the acidity and oxalic acid excess which yield quantitative results. V. I. Spitzin reports on the solubility of thorium oxalate in varying concentrations of several acids, but the effect of an excess oxalic acid is not included. Since solutions are sometimes presented for analysis that contain more than the recommended two per cent mineral acid, it would be advantageous to be able to quantitatively remove the thorium without otherwise altering the solutions. This was especially of interest in solutions containing bismuth, since it was hoped that some amounts of thorium could be precipitated in nitric acid solutions containing large quantities of bismuth. In removing the bismuth, first by a bismuth oxychloride precipitation, thee is every opportunity for carrying of the thorium.

aluminum has been considered as a material for cladding fuel elements to be used in reactors cooled by high-temperature recirculating water. Aluminum is abundant, chap, has a relatively low cross section for thermal neutrons, and is readily fabricated into complex shapes. For these reasons, it appears that the use of aluminum rather than steel, Zircaloy or other candidate materials for fuel element cladding, would result in considerable savings in operating expense. The actual economics will of course depend on specific factors such as core materials and design of the reactor/. Aluminum appears particularly attractive for cladding the cores of aluminum-plutonium alloy proposed for the Plutonium Recycle Test Reactor since, in this case, the physical characteristics of the core and cladding would be practically identical.

The following report discusses an equation derived by which the maximum allowable concentration in the atmosphere of a beta-omitting isotope for which lung damage is the limiting consideration can be calculated.

Discusses geography, climate, agricultural practices, and crops of each life zone in New Mexico. Provides mammal, breeding bird, reptile, amphibian, and plant species list for each zone. Includes a life zone map.

This report provides an overview of the creation of the Liquid Metal Fuel Reactor Experiment program. It furthers the work by constructing a single loop to test all the components required for the 16 loop reactor. This utility loop was also constructed to provide a facility for testing various components such as valves and flow meters.

Report presenting the results of testing in the transonic range of four flutter airfoils attached to a freely falling body. Failures of the airfoils were metered and recorded in order to determine the Mach numbers and altitudes of failure.

"The tests reported herein were made for the purpose of determining the high-speed load distribution on the wing of a 3/16 scale model of the Douglas XSB2D-1 airplane. Comparisons are made between the root bending moment and section torsional moment coefficients as obtained experimentally and derived analytically. The results show good correlation for the bending moment coefficients but considerable disagreement for the torsional moment coefficients, the measured moments being greater than the analytical moments. The effects of Mach number on both the bending moment and torsional moment coefficients were small" (p. 1).

From Introduction: "The engine evaluation of blends reported herein was conducted at the NACA Lewis laboratory. The data contained in references 2 to 14 are therefore summarized and the effect of the molecular structure of fuels on antiknock performance is shown in herein."

The use of a reactor charged with silver nitrate coated packing for removal of radio-iodine from the waste gases of Hanford chemical processing plants has been successful in removing approximately 99.5 percent of this activity. Studies by the Radiological Sciences Department indicated the desirability of further reducing the amount of radio-iodine released to the atmosphere. Therefore, this study was undertaken with the objectives of better understanding the inherent limitations to iodine removal by reaction with silver nitrate, and improving the efficiency of removal of iodine.

From introduction: "The concluding remarks of the report on the electron diffraction study of UF6 suggest two alternate explanations for the apparent discrepancy between the structure proposed for this compound as deduced from X-ray diffraction work on single crystals and from the electron diffraction investigation of the vapor. The second explanation is based on the premise that the difference may be due to essentially unlike methods of treating the diffraction data. In this report we shall analyze X-ray powder photographs following a scheme parallel to that used in the analysis of the electron diffraction data, to check whether this particular explanation is tenable."

Report presenting an experimental investigation performed to determine the effect on base and forebody pressures of using a sting modified with varying length splitter plates and fins instead of a conventional sting to support a cone-cylinder body of revolution.

The Homogeneous Reactor Test (HRT) is the experimental reactor facility (Frontispiece) being designed and constructed at ORNL as the next step in homogeneous reactor development between the 1-Mv HRE and a "full-scale" power station. The HRT will provide an integrated test at 5 to 10 Mv for the flowsheet and equipment designs on which the full-scale effort will be based. Furthermore, its design is such that several homogeneous systems which require essentially the same operating equipment may be tested with comparatively minor modifications of the original reactor installation. The reactor will be assembled in the building which housed the HRE, located in the experimental reactor exclusion area approximately one mile south of the oak ridge laboratory. (See figure 1) / It is the purpose of this report to provide information with which the hazardous aspects of this reactor may be evaluated. Briefly, it will be shown after a statement of purpose and a general description of the reactor that: 1. The design characteristics and equipment requirements are such that escape of highly reactive material from the reactor piping is unlikely. 2. Should the entire core and blanket contents suddenly escape from the reactor system, a seal-welded steel tank surrounding the …

Memorandum presenting the results of a wind-tunnel investigation of the damping in pitch of a model triangular wing with an aspect ratio of 4 combined with a slender pointed body. The investigation was conducted at Mach numbers from 0.10 to 0.95 for Reynolds numbers of 550,000 and 1,250,000 with additional data obtained at Reynolds numbers of 3,000,000 and 6,000,000 at Mach number 0.23. Results regarding the effects of oscillation amplitude, Mach number, Reynolds number, angle of attack, frequency, and pitching axis position are provided.