Report presenting an investigation of the performance of slurry fuels consisting of 50 percent magnesium powder in a hydrocarbon carrier in a flight-type, 6.5-inch-diameter ramjet engine mounted in a connected-pipe facility. Results regarding the slurry performance and a comparison of slurry and ethylene performance are provided.

Report presenting an investigation to determine the effects of center-of-gravity position on the gust loads of a delta-wing model with the leading edge swept back 60 degrees. A 15-percent change in the center-of-gravity position on the mean geometric chord produced a 7.5-percent change in load for the model in a sharp-edge gust and a 35-percent change in load in a gust with a 6.5 chord gradient distance.

"The flame velocities were measured of 20 percent oxygen and 80 percent carbon monoxide mixtures containing either light water or heavy water. The flame velocity increased from 34.5 centimeters per second with no added water to about 104 centimeters per second for a 1.8 percent addition of light water and to 84 centimeters per second for an equal addition of heavy water. The addition of heavy water caused greater increases in flame velocity with equilibrium hydrogen-atom concentration than would be predicted by the Tanford and Pease square-root relation" (p. 1).

Report presenting a study of the first stage performance characteristics of the two-stage turbine from the J73 turbojet engine. The reduced-chord first-stage turbine operated at a peak brake internal efficiency of over 91 percent at a stage overall pressure ratio of 1.4 and at 90 percent of the design equivalent speed. The unit exhibited high efficiency over a wide range of operating variables.

From Summary: "Total vapor pressures were measured for 16 acid mixtures of the ternary system nitric acid, nitrogen dioxide, and water within the temperature range 10 degrees to 60 degrees Celsius, and with the composition range 71 to 89 weight percent nitric acid, 7 to 20 weight percent nitrogen dioxide, and 1 to 10 weight percent water. Heats of vaporization were calculated from the vapor pressure measurements for each sample for the temperatures 25, 40, and 60 degrees Celsius. The ullage of the apparatus used for the measurements was 0.46. Ternary diagrams showing isobars as a function of composition of the system were constructed from experimental and interpolated data for the temperatures 25, 40, 45, and 60 degrees C and are presented herein."

Report presenting a comparison of three hypervelocity vehicles: a ballistic rocket, a skip rocket, and a rocket glider. Range efficiency, automatic heating, and problems of glide rockets are explored.

Report presenting an investigation to evaluate the external-store drag reductions obtainable by application of Baldwin's moment-of-area rule. Several wing-body combinations were investigated with and without four typical air-to-air missiles. Results regarding the total-drag measurements, wave-drag components, and effectiveness of moment-of-area rule for reducing the drag of the external-store installations are provided.

Report presenting rotating-stall and blade-vibration data for the first three rotor blade rows of a 13-stage axial-flow compressor at several inlet temperatures. Stall patterns of 1 through 5 stall zones were detected at all inlet temperatures in the equivalent compressor speed ranges between 4600 and 6200 rpm.

Memorandum presenting the effects on combustor performance of operation at the high inlet-air pressures, temperatures, and velocities representative of conditions that may be encountered in high-pressure-ratio turbojet engines or at high flight speeds studied in a single tubular combustor. Some of the performance characteristics investigated were combustor-liner temperatures, carbon deposition, smoke formation, and combustion efficiency.

Report presenting an analysis of the causes of compressor stall and flame-out when armament is fired during flight at high altitudes. Experimental data are also presented. The increase in compressor-inlet temperature during armament firing was found to be the most important single factor affecting engine performance.

Report presenting an investigation to determine the effects of inlet-annulus blockage on compressor performance and its corresponding effect on the computed performance of a hypothetical engine. The hypothetical engine performance was calculated from the overall compressor performance and assumed component performance characteristics. Results regarding the compressor performance with no inlet blockage, effect of hub blockage on compressor performance and stall characteristics, effect of sector blockage on compressor performance, effect of hub blockage on computed engine performance, and design and control problems are provided.

Memorandum presenting rudder-pulse maneuvers performed with a swept-wing fighter-type airplane at altitudes from 30,000 to 43,000 feet over a Mach number range of 0.71 to 1.48 to determine the lateral stability characteristics relative to the stability axes, in general, and the lateral derivative characteristics, in particular. Four configurations were employed; three involves different vertical tails with varying aspect ratio or area and the fourth employed a large tail with an extension of the wing tips.

Memorandum presenting an investigation to define the relationships between the extent of laminar flow and such variables as surface smoothness, wall temperature, pressure gradient, and Mach number. The purpose of this particular paper is to review briefly the results that have been obtained from research.

"A spin-tunnel investigation of a 1/26 scale model of the Douglas XTB2D-1 airplane has been conducted in the Langley 20-foot free-spinning tunnel. The effects of control settings and movements upon the erect- and inverted-spin and recovery characteristics of the model were determined for various loading conditions. Tests were also performed to determine the effects of various tail modifications. The investigation included emergency spin-recovery parachute tests as well as crew-escape and rudder- and elevator-force tests. All tests were performed at an equivalent spin altitude of 20,000 feet" (p. 1).

"An investigation of the DM-1 Glider, which had approximately triangular plan form, an aspect ratio of 1.8 and a 60 degree sweptback leading edge, has been conducted in the Langley full-scale tunnel. The investigation consisted of the determination of the separate effects of the following modifications made to the glider on its maximum lift and stability characteristics: (a) installation of sharp leading edges over the inboard semispan of the wing, (b) removal of the vertical fin, (c) sealing of the elevon control-balance slots, (d) installation of redesigned thin vertical surfaces, (e) installation of faired sharp leading edges, and (f) installation of canopy" (p. 1).

Report presenting detailed circumferential and radial surveys of total pressure and total temperature made downstream of the turbine rotor of a high-speed, high-specific-mass-flow turbine at design operating conditions. The purpose of this testing was to determine the sources and magnitudes of losses in turbines. Results regarding total pressure ratio, total-temperature-drop ratio, contours of efficiency, and location of the losses are provided.

Memorandum presenting an investigation of the flow characteristics over a 6-percent-thick symmetrical circular-arc airfoil section with a 30-percent-chord trailing-edge flap at a Mach number of 6.90 and a Reynolds number of 1.65 x 10(sub 6). The model was tested over an angle-of-attack range of 0 to 16 degrees and a flap-deflection range of -16 degrees to 16 degrees. Results regarding pressure results and aerodynamic characteristics are provided.

Report presenting testing of a 4.5 inch by 4.5 inch tunnel with slots in two opposite walls in order to determine the effects of various slot exit shapes, mixing sections, and diffusers on power requirements. Some of the data obtained included measurements of the pressure ratio required to operate the tunnel, the effects of auxiliary bleed flow, diffuser static-pressure ratios and distributions, and diffuser total pressure distributions.

Report presenting an analysis of the blade-element performance of a highly loaded transonic rotor with double-circular-arc blades. The rotor was purposely loaded beyond the prudent level for exploratory purposes. Results regarding the radial-distribution plots, blade-element data, element blade-to-blade loss variation, and a comparison of steady-state and hot-wire measurements are provided.

Report discussing an investigation of a 45 degree swept-back-wing-body combination with flap spoiler ailerons, deflector ailerons, and a spoiler-slot-deflector aileron. The pressures were measured from Mach numbers 0.60 to 1.03 and at various angles of attack.

The gust and draft velocities from records of NACA instruments installed in P-61C airplanes participating in thunderstorm flights at Clinton County Army Air Field, Ohio, from September 10, 1947 to September 15, 1947, are presented.

Memorandum presenting an investigation of the performance of a five-stage transonic research compressor with distorted inlet flow. Both overall performance and individual blade-row performance results over a range of compressor speeds and equivalent weight flows were obtained with three circumferential inlet flow-distortion patterns covering annular extents of 60, 120, and 180 degrees. Results regarding compressor-inlet conditions and overall performance and individual blade-row performance are provided.

Memorandum presenting a flight investigation to determine the longitudinal and lateral handling qualities of the Douglas X-3 research airplane in the clean configuration. Static and dynamic stability and control characteristics were determined during trimmed and maneuvering flight at an average altitude of 30,000 feet and over a Mach number range from 0.7 to 1.16.

The gust and draft velocities evaluated from acceleration and airspeed-altitude records taken by NACA instruments installed in P-61c airplanes participating in thunderstorm flights 9, 10, and 11 of July 12, 1946, July 17, 1946, and July 18, 1946, respectively, are presented in references 1 and 2 for previous flights. In accordance with a recent discussion with a member of the U.S. Weather Bureau staff, motion-picture records of the pilots' instrument panels for the present flights were inspected to note variations in the readings of a milliammeter used in conjunction with other equipment to indicate ambient air temperature. The inspection indicated that the instrument read zero throughout all traverses.