A self-contained developmental or the formation of the problem of inelastic neutron scattering by crystals is presented. although nearly all of the methods and results used in the present discussion have appeared in a variety of previously published papers, additional mathematical details are given here which have been found by thee authors to aid in understanding the final results.

The nuclear characteristics and fuel costs of a number of aqueous homogeneous reactors have been estimated. Most of the reactors studied were cylindrical, two-region power-breeders variously having between 0 and 300 g/l of thorium in the core and between 500 and 1000 g/l of thorium in the blanket. The results of the calculations, including breeding ration, fuel inventories, doubling times, and net fuel costs, are summarized in this report.

The object of the work performed under this contract was to investigate the possibility of gas plating copper base metal with (a) pure chromium metal from chromium hexacarbonyl vapor; (b) chromium-nickel plating from a mixture of chromium hexacarbonyl and nickel tetracarbonyl. The object of the work performed during the final month was to confirm the fact that the gas plating of chromium metal and chromium-nickel laminates free from nitrides, oxides and carbides was practical.

A 10% phosphoric acid solution contain 0.2% "Rodine 45" inhibitor is recommended to be used for the chemical cleaning of the HRT seam and closed colling water systems. Wet storage is recommended for both of these systems. The steam system is to be stored with steam condensate containing 100 ppm hydrazine, and closed cooling water system is to be stored with steam condensate containing 1000 ppm potassium chromate.

Radiation level measurements of various HRE fuel system components, made in September, 1956, after 27 moths of storage, are compared with the June, 1954, readings before storage. Measurements were made with a standard cutie pie and results tabulated.

To supply information about the several letdown valves which have been in HRT service, a typical valve plug examined by the Metallurgy Section confirms the belief that chemical attack on the Stellite #6 was occurring. It appears that most of the corrosion was due to rinse solutions, since this phenomenon has not been noted on letdown valves in the HRT Mockup where over 90% of the operating time has been with UO2SO4 solutions.

The Eyewash program, written by James H. Alexander and Nancy D. Given, provides solutions of reactor criticality problems in spherical geometry by means of the group diffusion method. It employs thirty lethargy groups (plus one thermal group) in nine regions. The input consists principally of specifying the geometrical scaling factor, boundaries and compositions of the various regions, and temperature level. The output includes the value of vc that would render the system critical, the relative fission density distribution, fissions, absorptions, and leakages in each lethargy group in each region, and, if desired, an edit of the flux at each space point, each lethargy, and an edit of the macroscopic cross sections for each lethargy, each region. OCUSOL-A is a minor modification and extension of Eyewash. It provides for the computation and editing, on the supervisory control typewriter, of the total absorptions in selected nuclides in the various regions. This information is useful in the computation of breeding ratios and the preparation of detailed neutron balances, and in the estimation of flux-averaged cross sections for use in estimating the rate of change of concentration of the various nuclides with burn-up. The program also provides for saving and transferring the final fission …

Annual report submitted by the Boy Scouts of America to Congress describing highlights from 1926, activities, finance, organizational leadership, and other information about scouting programs.

The General Electric Company is designing and building a 180,000 kilowatt nuclear power plant for the Commonwealth Edison Company at a site 47 miles southwest of Chicago. The construction permit was issued on May 4, 1956 but is subject to submittal to the Commission of a final hazards summary report and a finding by the Commission that the final design provides reasonable assurances that the health and safety of the public will not be endangered by operation of the reactor in accordance with the specified procedures.

In concurrent flow of two phase mixtures there exists a velocity difference between the vapor and liquid phases. This difference in velocity is known as the slip velocity. The prediction of slip is the subject of Part I. In boiling systems there is some heat transfer rate at which nucleste boiling becomes unstable. At this point the separate bubbles coalesce forming an insulating vapor film on the heat transfer surface resulting in the destruction, or burnout, of the heater. The prediction of the conditions causing burnout is the subject of Part II.

Agency strategic plan for the Railroad Commission of Texas describing the organization's planned services, activities, and other goals during fiscal years 2019 through 2023

This note describes an analysis of the primary creep rates in thin-walled pressure tubing. The analysis accounts for the increase in tube radius and decrease of tube wall thickness. Both of these effects increase the stress; hence, they can affect the creep rate and cause unstable creep conditions.

Document listing Prudential salaries for "[..]vy & Le[o]y," "H. Gale Rogers," "R. W. Rogers," "A. [L.] Wallace," and "J. W. Duckey."

From abstract: "Resistivities of solid solution alloys in the systems Gd-Lu, Tb-Lu, Gd-Er, and Y-Lu were measured from 4.2-320°K to determine the behavior of the resistivity in alloy systems with magnetic phenomena arising from localized magnetic moments. A large contribution to the residual resistivity is caused by the random distribution of these localized moments through the lattice. An analysis of the lattice resistivity of the metals shows large variations across the heavy rare-earth series which are possibly correlated with the change of c/a ratio of the metals and the attendent changes in the Fermi surface geometry."

Reconciliation report with an ending account balance of $836.54 reconciled for the period ending on March 29, 2002.

Memos, agendas, regional hydrology, and field trip reports are included for the INEL oversight program; they relate to the hydrogeology of INEL and ICPP, and to the cleanup effort at these sites.

Experimental data in the literature on the physical, thermodynamic, and transport properties of aqueous LiOH are summarized. The behavior of some properties is predicted beyond the range of the data. 12 fig, 14 tables, 20 references.

Weekly report of the Texas Crop and Livestock Reporting Service on turkey poult numbers in Texas and compared with other states. It includes compiled statistics across six consecutive weeks during two years for turkey eggs set and poults hatched.

None

Coal is our largest domestic energy resource with recoverable reserves estimated at 268 billion short tons or 5.896 quads Btu equivalent. This is approximately 95 percent of US fossil energy resources. It is relatively inexpensive to mine, and on a per Btu basis it is generally much less costly to produce than other energy sources. Its chief drawbacks are the environmental, health and safety concerns that must be addressed in its production and consumption. Historically, coal has played a major role in US energy markets. Coal fueled the railroads, heated the homes, powered the factories. and provided the raw materials for steel-making. In 1920, coal supplied over three times the amount of energy of oil, gas, and hydro combined. From 1920 until the mid 1970s, coal production remained fairly constant at 400 to 600 million short tons a year. Rapid increases in overall energy demands, which began during and after World War II were mostly met by oil and gas. By the mid 1940s, coal represented only half of total energy consumption in the US. In fact, post-war coal production, which had risen in support of the war effort and the postwar Marshall plan, decreased approximately 25 percent between 1945 …

None

Ammonium nitrate production during the operation of the Defense Waste Processing Facility (DWPF) has been identified as a major problem. The accumulation of ammonium nitrate deposits in the vent system of the chemical processing cell has substantial safety implications and will require analysis of ammonium ions within DWPF process samples. As a part of the research and development of the DWPF at TNX, an ammonium analysis method developed by Dionex Corporation has been identified and confirmed to provide the required information. This memorandum describes the technical basis of the method, the accuracy and precision of the method, known interferences, and maintenance details.

Memos, agendas, regional hydrology, and field trip reports are included for the INEL oversight program; they relate to the hydrogeology of INEL and ICPP, and to the cleanup effort at these sites.

Results are reported in two areas: (1) understanding the mechanism of superplasticity in those that show unusual resistance to intergranular cavitation, and (2) understanding the growth of heteroepitaxial films of oxides by CVD (NiO, TiO{sub 2}).