The TESTCLK module was specifically designed for use in prototyping crates for the Colliding Detector Facility (CDF) Run 2 Experiment at Fermi National Accelerator Laboratory. The TESTCLK Module allows the user to supply system clocks and trigger signals to stand-alone crates. This module has allowed designers of the CDF Run 2 electronics to thoroughly test their modules, despite the lack of a DAQ system supplied clock and trigger interface. This paper will explore the features that were found important to incorporate into the TESTCLK, and describe how they were implemented. The paper will also describe how the TESTCLK module has been used to support the initial implementation of the DAQ system at CDF. This has allowed data taking and testing of CDF Electronic modules before production clock and trigger modules became available.

There is very strong circumstantial evidence that there was an inflationary epoch very early in the history of the universe. In this lecture the author describes how we might be able to piece together some understanding of the dynamics during and immediately after the inflationary epoch.

We summarize recent measurements made at the Tevatron Collider using top event candidates. Cross section and mass measurements are discussed in a separate contribution to these Proceedings. Here we report on studies of the top P_T distribution in t{anti t} production and studies of single top production. Properties of top decays examined are: BF(t {yields} Wb)/BF(t {yields} Wq), helicity amplitudes of W's from top decays and correlations of t{anti t} decay products. Searches for new physics in rare top decays and a search for a state X {yields} t{anti t} are also reported.

The stacking of second and third layers of supercrystals of self-assembled passivated gold nanoparticles has been investigated using transmission electron microscopy. We report for the first time nanoparticles occupying the twofold saddle site in the third layer.

A message passing library's implementation of broadcast communication can significantly affect the performance of applications built with that library. In order to choose between similar implementations or to evaluate available libraries, accurate measurements of broadcast performance are required. As we demonstrate, existing methods for measuring broadcast performance are either inaccurate or inadequate. Fortunately, we have designed an accurate method for measuring broadcast performance. Measuring broadcast performance is not simple. Simply sending one broadcast after another allows them to proceed through the network concurrently, thus resulting in accurate per broadcast timings. Existing methods either fail to eliminate this pipelining effect or eliminate it by introducing overheads that are as difficult to measure as the performance of the broadcast itself. Our method introduces a measurable overhead to eliminate the pipelining effect.

This work combines focused ion beam sputtering and ultra-precision machining as a first step in fabricating microstructure in metals and alloys. Specifically, {approx}25{micro}m diameter micro-end mills are made from cobalt M42 high-speed steel and C2 micrograin tungsten carbide tool blanks by ion beam sputtering. A 20 keV focused gallium beam defines tool cutting edges having radii of curvature < 0.1{micro}m. Micro-end mills having 2, 4 and 5 cutting edges successfully machine small trenches in 6061-T4 aluminum, brass, 4340 steel and polymethyl methacrylate. Machined trench widths are approximately equal to the tool diameters and surface roughnesses (rms) are {approx}150 nm or less. Microtools are robust and operate for more than 6 hours without fracture. Results from ultra-precision machining aluminum at feed rates as high as 50 mm/minute are included.

It is estimated that two billion people live without electricity and its services worldwide. In addition, there is a sizeable number of rural villages that have limited electrical service, with either part-day operation by diesel generator or partial electrification. For many villages connected to the grid, power is often sporadically available and of poor quality. The US National Renewable Energy Laboratory (NREL) in Golden, Colorado, has initiated a program that involves hybrid systems, to address these potential electricity opportunities in rural villages through the application of renewable energy technologies.1 The objective of this program is to develop and implement applications that demonstrate the technical performance, economic competitiveness, operational viability, and environmental benefits of renewable rural electric solutions, compared to the conventional options of line extension and isolated diesel mini-grids. Hybrid systems are multi-disciplinary, multi-technology, multi-application programs composed of six activities, including village applications development, computer model development, systems analysis, pilot project development, technical assistance, and Internet-based village power project data base. While the current program emphasizes wind, photovoltaics (PV), and their hybrids with diesel generator, micro-hydro and micro-biomass technologies may be integrated in the future. Thirteen countries are actively engaged in hybrid systems for rural and remote applications and another …

The CDF Calorimetry Readout module, called the ADMEM, has been designed to contain both the analog circuitry which digitizes the phototube charge pulses, and the digital logic which supports the readout of the results through the CDF Run 2 DAQ system. The ADMEM module is a 9Ux400mm VMEbus module, which is housed in a CDF VMEbus VIPA crate. The ADMEM must support near deadtimeless operation, with data being digitized and stored for possible readout every 132ns or 7.6 Mhz. This paper will discuss the implementation of the analog and digital portions of the ADMEM module, and how the board was laid out to avoid the coupling of digital noise into the analog circuitry.

We have observed 1 event consistent with the signature expected of the rare decay of a positive kaon to a positive pion and a neutrino anti-neutrino pair. In the examined momentum region of 211 to 230 MeV/c in the center of mass of the kaon we estimated the backgrounds to be about 0.08 {+-} 0.03 events. From this observation we estimate the branching ratio to be 4.2{sub {minus}3.5}{sup +9.7} x 10{sup {minus}10}. In this presentation I will explain the experiment, and the analysis techniques. I will also discuss the expected improvements in the near future from the analysis of new data sets.

By the end of June 1999, about 250 megawatts of wind generation will have been dedicated in the state of Iowa. This represents the beginning of what is likely to be significant wind capacity development during the next 20 years in the state, as a result of possible public and governmental mandates and consumers' desire for sustainable sources of energy. As the utility industry in the United States moves towards a new structure, renewable energy sources continue to be an important part of new resource development. In this paper, we consider the predicted trends in load growth in Iowa. After accounting for the retirement of nuclear and older fossil fuel facilities over the next 15 years, we estimate Iowa's potential renewable generating capacity through the year 2015 and anticipate the contribution of wind energy to Iowa's portfolio. The Iowa Wind Energy Institute (IWEI) has been monitoring the wind resource in Iowa since June 1994 to obtain wind speed averages at 10, 33 and 50 meters above ground at fourteen geographically dispersed potential wind farm sites. Winds in the Midwest are primarily generated by fronts moving through the region. The Northwest Buffalo Ridge area of Iowa typically has wind speed averages …

Structured packings utilized in today's distillation packed towers consist of stacked units of many vertically oriented parallel corrugated plates. The V-shaped corrugations are oriented at a fixed angle with respect to the vertical direction, and the corrugation angle in adjacent plates are oriented in reverse direction. Points of contact, at the crests of the corrugations, between adjacent plates, form an unconsolidated porous medium with known topology. Modern structured packings have been gaining acceptance in several separation processes, particularly distillation where gas/vapor and liquid flow countercurrently through the packing. In addition, structured packings have been credited with relatively low pressure drop, high efficiency, low holdup, and higher capacity; the packing also can be made corrosion resistive.

Luminosity in the LHC will depend critically on the alignment of the triplet quadrupoles. These quadrupoles are closest to the interaction points (IPs), have large gradients and the {beta} functions have their largest values within these quadrupoles. Within a triplet, the cold masses of the Q1 and Q3 quadrupoles will be housed in separate cryostats while Q2a and Q2b will be placed in a single cryostat. The absolute alignments of Q1, Q3 and the Q2a/Q2b pair with respect to the desired axes will be determined during installation. The relative alignment of Q2a and Q2b however will be fixed once they are placed in their common cryostat at Fermilab. In this note, we examine the required relative alignment tolerances of Q2a and Q2b. An early study of some alignment tolerances was done by Weisz [1].

Approximately 50 metric tonnes heavy metal of aluminum-base spent nuclear fuel (Al-SNF) or 30,000 assemblies are being consolidated at the Savannah River Site. The melt-dilute (MD) technology option is being developed to allow ultimate disposal of these fuels in the Monitored Geologic Repository (MGR). Neutron absorbing materials are needed to maintain k{sub eff} less than 0.95 in desired packaging configurations. The aggressive chemical environment in the MGR is expected to lead to the reconfiguration of the contents of the codisposal waste package following waste package failure. This reconfiguration has the potential for increasing the reactivity of the waste package. The reconfiguration and redistribution of materials within the waste package are being investigated in an analytical and experimental program to support the criticality analysis. Further, the incorporation of neutron absorbing materials that will be integral to the MD SNF form is being investigated.

We report an updated direct measurement of the Standard Model CP violation parameter sin(2{beta}) using the CDF Detector at Fermilab. We use the entire Run-I data sample of 110 pb{sup -1} of proton-antiproton collisions at {radical}s = 1.8 TeV. In this analysis, we have combined three tagging methods: a same-side tag, a soft-lepton tag, and a jet-charge tag, and also added events that have less precise lifetime information because they are not fully contained within the acceptance of the SVX. The signal sample consists of {approx} 400 B {yields} J/{psi} K{sub S}{sup 0} events. A maximum likelihood fitting method is used to measure sin(2{beta}) = 0.79{sub -0.44}{sup +0.41} (stat.+syst.). We calculate a 93% Feldman-Cousins confidence interval of 0 < sin(2{beta}) < 1. This measurement is the best direct indication for CP violation in the neutral B meson sector to date. The sin(2{beta}) value is consistent with the Standard Model prediction of large CP symmetry violation in the b quark system.

This paper describes a standard for the readout and the trigger interface of a VMEbus based crate to be used by the front-end and trigger electronics of the CDF Run 2 experiment. Hereafter, this crate will be referred to as the CDF Readout Crate. The goal is to standardize the implementation of functions that are common among all systems (i.e. power distribution, timing signals, DAQ functions) while allowing some flexibility with other functions (e.g. cooling, rear transition modules, J3 backplanes, etc.). This allows designers of cards that satisfy this standard to have access to a common well defined crate system with interfaces to the trigger and DAQ system, allowing them to concentrate their efforts on the functions they need. This paper lists the mechanical specifications, readout scheme, backplane and signal distribution specifications of the CDF Readout Crate. The paper will also go into some detail on the TRigger And Clock + Event Readout (TRACER) module, a common CDF crate module which provides the crate interface to the system clock and the trigger system.

This paper presents techniques for fabricating microscopic, nonplanar features in a variety of materials. Micro-grooving and micro-threading tools having cutting dimensions of 10-30{micro}m are made by focused ion beam sputtering and used in ultra-precision machining. Tool fabrication involves directing a 20 keV gallium beam at polished cylindrical punches made of cobalt M42 high-speed steel or C2 tungsten carbide. This creates cutting edges having radii of curvature less than 0.4 {micro}m, and rake features similar to conventional lathe tools. Clearance for minimizing frictional drag of a tool results from the sputter yield dependence on ion herd target incidence angle. Numerically controlled, ultra-precision machining with micro-grooving tools results in a close matching between tool width and feature size. Microtools controllably machine 13 {micro}m wide, 4 {micro}m deep, helical grooves in polymethyl methacrylate and 6061-T6 Al cylindrical substrates. Micro-grooving tools also fabricate sinusoidal waveform features in polished metal substrates.

Simulation of hypersonic flight in ground test and evaluation (T and E) facilities is a challenging and formidable task, especially to fully duplicate the flight environment above approximately Mach 8 for most all hypersonic flight systems that have been developed, conceived, or envisioned. Basically, and for many years, the enabling technology to build such a ground test wind tunnel facility has been severely limited in the area of high-temperature, high-strength materials and thermal protection approaches. To circumvent the problems, various approaches have been used, including partial simulation and use of similarity laws and reduced test time. These approaches often are not satisfactory, i.e. operability and durability testing for air-breathing propulsion development and thermal protection development of many flight systems. Thus, there is a strong need for science and technology (S and T) community involvement in technology development to address these problems. This paper discusses a specific case where this need exists and where significant S and T involvement has made and continues to make significant contributions. The case discussed will be an Air Force research program currently underway to develop enabling technologies for a Mach 8-15 hypersonic true temperature wind tunnel with relatively long run time. The research is based …

Experiments have been performed using a coaxial end-effecter to combine a focused laser beam and a plasma arc. The device employs a hollow tungsten electrode, a focusing lens, and conventional plasma arc torch nozzles to co-locate the focused beam and arc on the workpiece. Plasma arc nozzles were selected to protect the electrode from laser generated metal vapor. The project goal is to develop an improved fusion welding process that exhibits both absorption robustness and deep penetration for small scale (< 1.5 mm thickness) applications. On aluminum alloys 6061 and 6111, the hybrid process has been shown to eliminate hot cracking in the fusion zone. Fusion zone dimensions for both stainless steel and aluminum were found to be wider than characteristic laser welds, and deeper than characteristic plasma arc welds.

Extreme Ultraviolet Lithography (EUVL) is a candidate for future application by the semiconductor industry in the production of sub-100 nm feature sizes in integrated circuits. Using multilayer reflective coatings optimized at wavelengths ranging from 11 to 14 nm, EUVL represents a potential successor to currently existing optical lithography techniques. In order to assess lifetimes of the multilayer coatings under realistic conditions, a series of radiation stability tests has been performed. In each run a dose of EUV radiation equivalent to several months of lithographic operation was applied to Mo/Si and MO/Be multilayer coatings within a few days. Depending on the residual gas concentration in the vacuum environment, surface deposition of carbon during the exposure lead to losses in the multilayer reflectivity. However, in none of the experimental runs was structural damage within the bulk of the multilayers observed. Mo/Si multilayer coatings recovered their full original reflectivity after removal of the carbon layer by an ozone cleaning method. Auger depth profiling on MO/Be multilayers indicate that carbon penetrated into the Be top layer during illumination with high doses of EUV radiation. Subsequent ozone cleaning fully removed the carbon, but revealed enhanced oxidation of the area illuminated, which led to an irreversible …

Recent CDF results with 110 pb{sup -1} of data on top quark production and decay properties are presented. Limits are placed on single top quark production in the W* and W-gluon channels. A measurement of the polarization of the intermediate W boson in top decay, a search for resonances in the mass of the t{bar t} system, and the transverse momentum of top quarks in t{bar t} events are presented.

The authors have directly measured the stress evolution during metal organic chemical vapor deposition of AlGaN/GaN heterostructures on sapphire. In situ stress measurements were correlated with ex situ microstructural analysis to directly determine a critical thickness for cracking and the subsequent relaxation kinetics of tensile-strained Al{sub x}Ga{sub 1{minus}x}N on GaN. Cracks appear to initiate the formation of misfit dislocations at the AlGaN/GaN interface, which account for the majority of the strain relaxation.

The Technical Design Report for the CDF II Detector calls for the development of an imbedded two-dimensional position sensitive detector sandwiched inside the electromagnetic calorimeter and placed at the shower maximum. The purpose of this detector is to aid in the identification of electrons and photons, to separate photons from {pi}{sup 0}s, and to help identify electromagnetic showers. This detector is called the Shower Max. In order to achieve CDF's goals for resolution, timing, power and economy, as well as to fit into the available space, a full-custom integrated circuit was required for the project - the SMQIE. The SMQIE has been fabricated in a 1.2{micro}m CMOS process using vertical NPN transistors in critical areas. It operates without deadtime. Its QIEs have eight ranges and an overall dynamic range of 13 bits. Its FADCs have a 5-bit resolution with a nominal LSB of 31.25 mV. Its Level 1 Trigger delays are 42 beam crossings or approximately 5.5 {micro}s. Its data buffers hold up to four events, each of which can consist of four time slices. Finally, the chip accepts a maximum input charge up to 150 pC with a minimum resolution of 15 fC.

A trigger track processor is being designed for CDF Run 2. This processor identifies high momentum (P{sub T} > 1.5 GeV/c) charged tracks in the new central outer tracking chamber for the CDF II detector. The design of the track processor, called the eXtremely Fast Tracker (XFT), is highly parallel and handle an input rate of 183 Gbits/sec and output rate of 44 Gbits/sec. The XFT is pipelined and reports the results for a new event every 132ns. The XFT uses three stages, hit classification, segment finding, and segment linking. The pattern recognition algorithms for the three stages are implemented in Programmable Logic Devices (PLDs) which allow for in-situ modification of the algorithm at any time. The PLDs reside on three different types of modules. Prototypes of each of these modules have been designed and built, and are working. An overview of the hardware design and the system architecture are presented.

Exfoliation of Sic by hydrogen implantation and subsequent annealing forms the basis for a thin-film separation process which, when combined with hydrophilic wafer bonding, can be exploited to produce silicon-carbide-on-insulator, SiCOI. Sic thin films produced by this process exhibit unacceptably high resistivity because defects generated by the implant neutralize electrical carriers. Separation occurs because of chemical interaction of hydrogen with dangling bonds within microvoids created by the implant, and physical stresses due to gas-pressure effects during post-implant anneal. Experimental results show that exfoliation of Sic is dependent upon the concentration of implanted hydrogen, but the damage generated by the implant approaches a point when exfoliation is, in fact, retarded. This is attributed to excessive damage at the projected range of the implant which inhibits physical processes of implant-induced cleaving. Damage is controlled independently of hydrogen dosage by elevating the temperature of the SiC during implant in order to promote dynamic annealing. The resulting decrease in damage is thought to promote growth of micro-cracks which form a continuous cleave. Channeled H{sup +} implantation enhances the cleaving process while simultaneously minimizing residual damage within the separated film. It is shown that high-temperature irradiation and channeling each reduces the hydrogen fluence required to …