Paper 1: Using dimuons collected with the D0 detector during the 1993--1995 Tevatron collider run, the authors have measured the b-quark cross section and b[anti b] correlations as given by the difference in azimuthal angle between the two muons. Both measurements agree with the NLO QCD predictions within experimental and theoretical errors. (Three other papers are included in this report.)

We describe the design and construction status of theLow-Energy Ring (LER) of the PEP-II project, a collaboration of SLAC,LBNL, and LLNL. In the past year we have optimized LER parameters andstarted component fabrication. By reusing the original wigglers, we wereable to simplify the design of the distributed wiggler photon dump, whichmust dissipate 260 kW of power. The number of RF stations (eachcomprising a klystron powering two 476-MHz cavities) was reduced from 4to 3. We have begun fabrication of the arc vacuum system based on anextruded Al antechamber configuration with discrete photon stops andTSPs. The design of the straight section vacuum components, to befabricated from stainless steel pipe, is also completed. Quadrupoles anddipoles are provided under a collaborative agreement with IHEP (Beijing);correctors and skew quadrupoles are built domestically and sextupoles arerefurbished from existing PEP magnets. LER commissioning will begin earlyin 1998.

This document contains summary reports of stream habitat surveys, conducted in the Yakima River basin, by the Bureau of Fisheries (BOF, now National Marine Fisheries Service) from 1934-1942. These surveys were part of a larger project to survey streams in the Columbia River basin that provided, or had provided, spawning and rearing habitat for salmon and steelhead (Rich, 1948). The purpose of the survey was, as described by Rich, 'to determine the present condition of the various tributaries with respect to their availability and usefulness for the migration, breeding, and rearing of migratory fishes'. Current estimates of the loss of anadromous fish habitat in the Columbia River Basin are based on a series of reports published from 1949-1952 by the U.S. Fish and Wildlife Service. The reports were brief, qualitative accounts of over 5000 miles of stream surveys conducted by the BOF from 1934-1946 (Bryant, 1949; Bryant and Parkhurst, 1950; Parkhurst, 1950a-c; Parkhurst et al., 1950). Despite their brevity, these BOF reports have formed the basis for estimating fish habitat losses and conditions in the Columbia River Basin (Fulton, 1968, 1970; Thompson, 1976; NPPC, 1986). Recently, the field notebooks from the BOF surveys were discovered. The data is now archived …

This study was designed to describe aspects of the life history strategies of spring chinook salmon in the Grande Ronde basin. During the past year we focused on rearing and migration patterns of juveniles and surveys of spawning adults. The specific objectives for the early life history portion of the study were: Objective 1, document the annual in-basin migration patterns for spring chinook salmon juveniles in the upper Grande Ronde River, including the abundance of migrants, migration timing and duration; Objective 2, estimate and compare smolt survival indices to mainstem Columbia and Snake River dams for fall and spring migrating spring chinook salmon; Objective 3 initiate study of the winter habitat utilized by spring chinook salmon in the Grande Ronde River basin. The specific objectives for the spawning ground surveys were: Objective 4, conduct extensive and supplemental spring chinook salmon spawning ground surveys in spawning streams in the Grande Ronde and Imnaha basin, Objective 5; determine how adequately historic index area surveys index spawner abundance by comparing index counts to extensive and supplemental redd counts; Objective 6, determine what changes in index areas and timing of index surveys would improve the accuracy of index surveys; Objective 7, determine the relationship …

Active sub-slab depressurization (SSD) systems are an effective means of reducing indoor radon concentrations in residential buildings. However, energy is required to operate the system fan and to heat or cool the resulting increased building ventilation. We present regional and national estimates of the energy requirements, operating expenses, and CO{sub 2} emissions associated with using SSD systems at saturation (i.e., in all U.S. homes with radon concentrations above the EPA remediation guideline and either basement or slab-on-grade construction). The primary source of uncertainty in these estimates is the impact of the SSD system on house ventilation rate. Overall, individual SSD system operating expenses are highest in the Northeast and Midwest at about $99 y{sup -1}, and lowest in the South and West at about $66 y{sup -1}. The fan consumes, on average, about 40% of the end-use energy used to operate the SSD system and accounts for about 60% of the annual expense. At saturation, regional impacts are largest in the Midwest because this area has a large number of mitigable houses and a relatively high heating load. We estimate that operating SSD systems in U.S. houses where it is both appropriate and possible (about 2.6 million houses), will annually …

Wind induces a ground-surface pressure field around a building that can substantially affect the flow of soil gas and thereby the entry of radon and other soil-gas contaminants into the building. To quantify the effect of the wind-induced groundsurface pressure field on contaminant entry rates, the mean ground-surface pressure field was experimentally measured in a wind tunnel for several incidence angles of the wind, two atmospheric boundary layers, and two house geometries. The experimentally measured ground-surface pressure fields are compared with those predicted by a k-e turbulence model. Despite the fundamental limitations in applying a k-e model to a system with flow separation, predictions from the numerical simulations were good for the two wind incidence angles tested.

This information is an addendum to the report 'Investigation of Head Burns in Adult Salmonids, Phase 1: Examination of Fish at Lower Granite Dam, July 2, 1996' by Ralph Elston because there may be relevant observations included here. The author of this document participated in the examinations at Lower Granite Dam described in that report. Because of Endangered Species Act issues, the Rapid River stock of spring chinook salmon reared at Lookingglass Hatchery on the Grande Ronde River in northeastern Oregon are annually being captured as returning adults at Lower Granite Dam on the Snake River and trucked to Lookingglass. During the peak migration period they are held in an adult holding facility at Lower Granite for as long as 72 hours and then transported by truck to Lookingglass for holding in an adult pond for spawning. In 1996 a total of 572 adults were transported from Lower Granite Dam between May 3 and August 6. Two-hundred eighty-one of these were later transported from Lookingglass to Wallowa Hatchery for artificial spawning and the remaining 291 were held for spawning at Lookingglass. On May 21, 24, 30 and June 2, 1996 hatchery personnel identified a total of 32 off-loaded fish with …

The various power systems for supplying the PEP-II DCmagnets rely exclusively on switch mode conversion, utilizing a varietyof means depending on the requirements. All of the larger power supplies,ranging from 10 to 200 kW, are powered from DC sources utilizingrectified 480 V AC. Choppers can be used for the series connectedstrings, but for smaller groups and individual magnets, inverters drivinghigh-frequency transformers with secondary rectifiers comprise the bestapproach. All of the various systems use a "building block" approach ofmultiple standard-size units connected in series or parallel to mostcost-effectively deal with a great range of voltage and currentrequirements. Utilization of existing infrastructure from PEP-I has beena cost-effective determinant. Equipment is being purchased eitheroff-the-shelf, through performance specification, or by hardware purchasebased on design-through-prototype. The corrector magnet power system,utilizing inexpensive, off-the-shelf four-quadrant switching motorcontrollers, has already proven very reliable: 120 of the total of 900units have been running on the injection system for four months with nofailures.

None

fThe safe and verifiable disposition, either by incineration or chemical neutralization of chemical warfare (CW) agents requires correct {ital a priori} identification of each munition or container to be processed. A variety of NDE techniques have been used or tested for the examination and characterization of munitions. In the U.S., three widely used techniques are X-ray radiography, acoustic resonance spectroscopy (ARS), and prompt gamma ray neutron activation analysis (PINS). The technical bases, instrumental implementations, and applications of the U.S. versions of these methods are briefly discussed. 10 refs., 2 figs., 1 tab.

Using dimuons collected with the D{null} detector during the 1993- 1995 Tevatron collider run, we have measured the {ital b}-quark cross section and {ital b{anti b}} correlations as given by the difference in azimuthal angle between the two muons. Both measurements agree with the NLO QCD predictions within experimental and theoretical errors.

Transient evolution of the power radiated coherently by a charged- particle bunch orbiting between two infinite, parallel conducting plates is calculated. The plates comprise an idealized vacuum pipe in a bending magnet. The bunch moves on a trajectory such that it suddenly diverts from a straight-line path to a circular orbit and begins radiating. The influence of the plates on the transients is contrasted to their shielding of the steady-state radiated power. The effect of the radiation field on beam emittance in a magnetic bending system is also quantified. 18 refs., 1 fig.

None

CEBAF, the Continuous Electron Beam Accelerator Facility, is a 5-pass, recirculating, superconducting rf linac designed to provide exceptional beam quality at 4 GeV up to 200 {mu}A CW. It is made up of an injector, two 400-MeV linacs, and 9 recirculation arcs having a total beamline length of more than 4.5 km. On Nov. 5, 1995, CEBAF delivered a 4 GeV, 25-{mu}A CW electron beam to the first of 3 experimental halls and the experimental physics program was started 10 days later. Accelerator availability during the first month of the experimental run exceeded 75%. Beam properties measured in the experimental hall to date are a one sigma momentum spread of 5{times}10{sup -5} and an rms emittance of 0.2 nanometer-radians, better than design specification. CW beam has been provided from all 5 passes at 800 MeV intervals. Outstanding performance of the superconducting linacs suggests a machine energy upgrade to 6 GeV in the near term with eventual machine operation at 8-10 GeV. Results from commissioning and operations experience since the last conference are presented.

The energy spread in the beam due to rf amplitude and phase errors is calculated for multiple passes and off-crest operation. Effects of the slow phase errors and feedback systems are included in the calculation. If an rms energy spread requirement is to be met, a final formula gives the tradeoff between slow and fast phase errors and amplitude errors. Phase and amplitude stability requirements are derived for CEBAF IR DEMO FEL (free electron laser).

Recirculating, energy-recovering linacs can be used as driver accelerators for high power FELs (free electron lasers). Instabilities which arise from fluctuations of the cavity fields are investigated. Energy changes can cause beam loss on apertures, or, when coupled to M{sub 56}, phase oscillations. Both effects change the beam induced voltage in the cavities and can lead to unstable variations of the accelerating field. An analytical model which includes amplitude and phase feedback, has been developed to study the stability of the system for small perturbations from equilibrium. The interaction of the electron beam with the FEL is a major perturbation which affects both the stability of the system and development of startup and recovery scenarios. To simulate the system`s response to such large parameter variations, a numerical model of the beam-cavity interaction has been developed which includes low level rf feedback, phase oscillations and beam loss instabilities and the FEL interaction. Agreement between the numerical model and the linear theory has been demonstrated in the limit of small perturbations. In addition, the model has been benchmarked against experimental data obtained during CEBAF`s high current operation. Numerical simulations have been performed for the high power IR DEMO approved for construction at …

An rms-mismatched beam can evolve rapidly to a configuration of quasiequilibrium under the influence of space-charge forces. As sit evolves, its emittance grows and a diffuse halo forms. The beam`s distribution function accounts for all the complicated dynamics. Unfortunately, the distribution function is difficult to calculate inasmuch as the physics lies at the interface between classical mechanics and thermodynamics. This paper presents the foundation for a statistical theory of the dynamics of nonequilibrium space-charge-dominated beams. Within certain approximations, the theory takes on a Fokker-Planck form. Key questions arise concerning the nature of the dynamical friction and diffusion in the beam`s phase space and of the quasiequilibrium configuration that ensues.

This document defines the waste certification program being developed for implementation at Oak Ridge National Laboratory (ORNL). The document describes the program structure, logic, and methodology for certification of ORNL wastes. The purpose of the waste certification program is to provide assurance that wastes are properly characterized and that the Waste Acceptance Criteria (WAC) for receiving facilities are met. The program meets the waste certification requirements outlined in U.S. Department of Energy (DOE) Order 5820.2A, Radioactive Waste Management, and ensures that 40 CFR documentation requirements for waste characterization are met for mixed (both radioactive and hazardous) and hazardous (including polychlorinated biphenyls) waste. Program activities will be conducted according to ORNL Level 1 document requirements.

During the commissioning of the CEBAF accelerator, correction of dispersion and momentum compaction, and, to a lesser extent, transverse transfer matrices were essential for robust operation. With changing machine conditions, repeated correction was found necessary. To speed the diagnostic process the authors developed a method which allows one to rapidly track the machine optics. The method is based on measuring the propagation of 30 Hz modulated betatron oscillations downstream of a point of perturbation. Compared to the usual methods of dispersion or difference orbit measurement, synchronous detection of the beam displacement, as measured by beam position monitors, offers significantly improved speed and accuracy of the measurements. The beam optics of the accelerator was altered to decrease lattice sensitivity at critical points and to simplify control of the betatron function match. The calculation of the Courant-Snyder invariant from signals of each pair of nearby beam position monitors has allowed one to perform on-line measurement and correction of the lattice properties.

This report analyzes the local wind resource and evaluates the costs and benefits of supplementing the current diesel-powered energy system on San Nicolas Island, California (SNI), with wind turbines. In Section 2.0 the SNI site, naval operations, and current energy system are described, as are the data collection and analysis procedures. Section 3.0 summarizes the wind resource data and analyses that were presented in NREL/TP 442-20231. Sections 4.0 and 5.0 present the conceptual design and cost analysis of a hybrid wind and diesel energy system on SNI, with conclusions following in Section 6. Appendix A presents summary pages of the hybrid system spreadsheet model, and Appendix B contains input and output files for the HYBRID2 program.

This report identifies seven developers whose gasification technologies can be used to treat the organic constituents of municipal solid waste: Energy Products of Idaho; TPS Termiska Processor AB; Proler International Corporation; Thermoselect Inc.; Battelle; Pedco Incorporated; and ThermoChem, Incorporated. Their processes recover heat directly, produce a fuel product, or produce a feedstock for chemical processes. The technologies are on the brink of commercial availability. This report evaluates, for each technology, several kinds of issues. Technical considerations were material balance, energy balance, plant thermal efficiency, and effect of feedstock contaminants. Environmental considerations were the regulatory context, and such things as composition, mass rate, and treatability of pollutants. Business issues were related to likelihood of commercialization. Finally, cost and economic issues such as capital and operating costs, and the refuse-derived fuel preparation and energy conversion costs, were considered. The final section of the report reviews and summarizes the information gathered during the study.

Computer simulations using the multi-particle code PARMELA with a three-dimensional point-by-point space charge algorithm have turned out to be very helpful in supporting injector commissioning and operations at Thomas Jefferson National Accelerator Facility (Jefferson Lab, formerly called CEBAF). However, this algorithm, which defines a typical N{sup 2} problem in CPU time scaling, is very time-consuming when N, the number of macro-particles, is large. Therefore, it is attractive to use massively parallel processors (MPPs) to speed up the simulations. Motivated by this, the authors modified the space charge subroutine for using the MPPs of the Cray T3D. The techniques used to parallelize and optimize the code on the T3D are discussed in this paper. The performance of the code on the T3D is examined in comparison with a Parallel Vector Processing supercomputer of the Cray C90 and an HP 735/15 high-end workstation.

The alignment of the quadrupoles in a proton synchrotron is important and the alignment of the low beta quadrupoles in collider mode is even more critical. One of the important considerations is the relationship of the electric center of the Beam Position Monitors (BPMs) to the magnetic center of quadrupoles. Determining this involves measurements when the elements are not in the tunnel and careful alignment utilizing external reference marks when the BPMs are not physically attached to the quadrupole. Even when the BPM is attached to the quadrupole (and calibrated), systematic offsets can be introduced by cable mismatch or slight imbalances in the monitoring electronics. A method has been implemented at Cern [1,2] to determine this relationship using the beam itself. TM-1960 described a proof of principle experiment at the Tevatron using one of the individually powered quadrupoles near the B0 interaction region whose ACNET name is C:AQ7. This short note demonstrates that they can perform the same analysis on a set of quadrupoles powered by a single power supply without having to worry about exciting a single quadrupole.

An experiment was performed in the Tevatron to measure the tune spread versus octupole strength. The experiment is sensitive to the relationship between octupole strength and current in the T:OZF circuit and to the octupole (and other non-linear focusing fields) in the Tevatron. The major motivation for the experiment was to determine the value of octupole excitation that minimizes the tune spread: this value is an estimate of the value required to obtain ''zero'' total octupole excitation in the extraction process. The experiment was performed using the strip-line kickers at A17 and the resonant Schottky pickups. The horizontal proton kicker was excited with a sine-wave from a vector signal analyzer (HP-89440A) and the horizontal proton signal was received. The gating circuitry normally used to select proton or antiproton bunches was by-passed. The response function was measured and recorded on a floppy disk. Measurements were initially made with a 200 Hz span (0.250 Hz frequency bins) and later with a 100 Hz span (0.125 Hz frequency bins).