From introduction: A thorough investigation, both experimental and theoretical was carried out on plaque type radiators. Five phases of the work are reported: preliminary design analysis, experimental measurements, computational program and analytical studies, followed by a general discussion of source design principles. The results are summarized in graphs and formulae which may be applied to other design requirements.

Abstract: Irradiated fuel elements from the Organic Moderated Reactor Experiment (OMRE) first core loading have been examined and evaluated to determine: (1) the stability of the floating plate fuel element design, (2) the stability of the stainless steel clad UO2 - stainless steel cermet core fuel plates under irradiation and exposure to the organic coolant, (3) the extent and nature of deposits on the fuel element services, and (4) the distribution of burnup in the fuel elements.

Abstract: A loop has been constructed to study the removal of water and highly volatile materials from Organic Moderated Reactor coolant by vacuum degasification. An analysis of the process was made to determine the most important parameters for study during the experimental program.

Abstract: Accurate measurement of OMRE fuel-element surface temperatures is important for evaluation of the performance of organic compound as moderator and coolant materials in nuclear reactors; a mixture of polyphenyls has been used in reactor operation to-date.

Abstract: The influence of plutonium on the nuclear characteristics of organic moderated cores is studied.

Abstract: A fuel material evaluation was made by destructively examining a full-scale experimental fuel element, irradiated in the SRE to a maximum of 850 Mwd/MTU.

Abstract: A portable assembly for handling and shipping OMRE fuel elements is described and details of its operation are given. Problems of heat transfer and radiation shielding are discussed, and detailed analysis are presented.

Abstract: Tests were performed to determine the effect of thermal cycling on the across-the-seat leakage characteristics of commercially available valves considered for use in the sodium coolant system of the Hallam Nuclear Power Facility.

Abstract: This report describes a 300,000-kwe, sodium-cooled, graphite-moderated nuclear power plant based on existing technical information.

None

"Investigations into the behavior of the gas flow behind spherical or cylindrical blasts have shown that secondary shocks arise within the original detonation gases. The secondary shock, at first weak, is carried outward with the expanding gases. Subsequently it strengthens and bends back toward the origin, arriving there with high intensity. By using some recently developed techniques in shock dynamics a theory is developed by which the motion of the main shock wave, as well as the formation and subsequent motion of the secondary shock, are given by explicit formulae."

Report that summarizes multiple laboratories' reports on global fallout deposition. Reports include data on Strontium-90 deposition recorded by the Health and Safety Laboratory, data from other laboratories, related interpretive reports, and recent publications related to fallout.

Report that summarizes multiple laboratories' reports on global fallout deposition. Reports include data on Strontium-90 deposition recorded by the Health and Safety Laboratory, data from other laboratories, related interpretive reports, and recent publications related to fallout.

Report that summarizes multiple laboratories' reports on global fallout deposition. Reports include data on Strontium-90 deposition recorded by the Health and Safety Laboratory, data from other laboratories, related interpretive reports, and recent publications related to fallout.

Introduction: In conjunction with the final design and development of a 70 MW sodium intermediate heat exchanger and a sodium steam generator, an analysis is required which can be used as a basis for a determination to scale up or scale down the designs. Included in this analysis are those considerations leading to the recommendation of the best prototype test unit and to some of the limits imposed on scaling up or down when considering future applications of designs other than those actually tested. In addition, these considerations include aspects required to accurately predict the performance, operation, mechanical reliability, and feasibility of fabrication of the 70 MW design.

Abstract: This technical report summarizes the data obtained in a recent literature survey conducted to determine the effects of neutron irradiation on the impact and other mechanical properties of both ferritic steels and austenitic stainless steels. The survey was primarily aimed at obtaining sufficient data on the behavior of pressure vessel steels at high integrated neutron flux levels in order that a reference material of construction could be selected for the SM-2 (APPR-1B) reactor vessel. Materials studied in this literature survey included carbon and low alloy steels such as: ASTM A-212B, ASTM A-201, ASTM A-301B (CR-Mo), ASTM A-106 (coarse and fine grained), ASTM A-285, ASTM A-302B (Mn-Mo), ASTM A-353, ASTM A-203 Grade D, E-7016 carbon steel weld metal, USS Carilloy T-1, HY-65 and HY-80. In addition, Types 304 and 347 stainless steels were also investigated as representative austenitic materials which might be used in pressure vessel construction. A careful evaluation was made of the irradiation induced changes in the mechanical properties of the above materials. The ferritic steels were evaluated primarily on the basis of increases in transition temperature due to irradiation and decreases in the amount of maximum energy absorbed prior to ductile failure. Factors such as industrial experience, …

The objective of the study which is being carried out under contract AT(30-1)-2477 is the exploration of all aspects of research in water resources and supply to determine the potential for using radioisotope technology in this research. Problem areas in the application of tracers in this research are being investigated through the evaluation of past experimentation with radioisotopic techniques and through discussions with those who are active in this work. A series of suggestions relating to these techniques will de drawn up to indicate which techniques should be developed further in order that more extensive applications may be found for them.

A geometrical treatment has been used to outline the theoretical properties of optical fibers which are imperfect as well as geometrically and optically perfect. Experiments have been performed to measure some to the optical properties of individual fibers and fiber bundles.

From introduction: "This is the third of a series of quarterly reports which will cover the progress and results from the conceptual design, economic evaluations and research and development work performed by the General Electric Company as part of the Nuclear Superheat Project."

From introduction: "This report sets forth the results of a technical and economic analysis of automatic propulsion system control as a possible design improvement in the direct cycle boiling water reactor propulsion system in a T7 tanker."

Report documenting the Halogen Collector Test program, which was undertaken to provide "methods of removing trace quantities of radioactive iodine from an air stream" (p. 1). The report includes designs of the program and the test facility, test results, analysis of these results, and encountered problems. Appendices begin on page 38.

Report that summarizes the potential hazards of the Hanford Critical Mass Laboratory and presents operation procedures which will limit the probability of a nuclear accident. The report also outlines the planned experimental program, descriptions of the facility, and the administration of nuclear safety in the laboratory.

The spectrum of the mono-energetic neutron transport operator for a homogeneous sphere where the neutrons are scattered with spherical symmetry in the laboratory system is considered.

"Recent theoretical advances in describing the nucleon-nucleon interaction (particularly in the T=1 state) have emphasized the importance of obtaining an unambiguous experimental determination of the scattering matrix so that the nuclear phase shifts and details of the nuclear potential may be revealed. It is possible to select five experiments, the results of which, in principle at least, determine the scattering matrix and phase shifts uniquely at one energy. Two of these experiments, the cross section and polarization over the angular range of 0 to 90 degrees in the center of mass system, have been made at the University of Rochester at a laboratory energy of about 210 Nev."