Abstract: Because of the outstanding heat transfer efficiency of sodium, it is necessary in sodium-cooled reactors to consider and attempt to prevent the occurrence of adverse stresses as a result of thermal transients in the system.

Abstract: A 3000 kw (thermal) bayonet duplex tube model steam generator was performance-tested in a liquid metal test loop at MSA Research Corporation, Callery, Pennsylvania, under the cognizance of Atomics International.

From purpose and scope of study: This report contains a primary study based on estimated loads and resources deemed most likely to occur and a secondary study based on the sale by the summer of 1961 of an additional 400 MW of power to industries resulting in an equal increase in loads.

Abstract: The means to prevent the recurrence of tetralin leakage into the SRE sodium systems are discussed. Included is a description of the redesign of system components to utilize alternate coolants such as nitrogen, air, and NaK.

Report describing the LOLA computer code, which is "capable of processing analytical or empirical systems containing a large number of variable parameters" (p. 2). The report also describes the calculations that LOLA can make.

Report containing ongoing research and experiments of the Oak Ridge National Laboratory's Instrumentation and Controls Division.

Abstract: The mechanical and physical properties of Zircaloy-2 were determined as a function of five test variables: temperature, grain size, direction to rolling, hydrogen content, and the presence or absence of a notch.

"An investigation was made into the various processes for the fixation of mixed fission products as solids in order to determine the extent they could be utilized as heat sources for thermoelectric generators. Generators of up to ten watts can be designed and built with state-of-art'' thermoelectric materials and mixed fission products soon to be available from the ldaho Falls calcination pilot plant. Mixed fission products from other processes and plants to be on stream'' in this decade will be capable of fueling practical generators into the kilowatt range using thermoelectric materials available in the same time period. A survey was made on current research and development efforts on waste fixation processes. Studies showed that a wide range of power densities (from 0.002 to 0.2 watts per cubic centimeter) will be available from calcined fission product wasted. An experimental program for the consolidation of low density, Idaho Chemical Processing Plant alumina type wastes is reviewed. Preliminary results indicated that densification factors of three to four are readily obtainable for such wastes."

"Mesic decay of hyperfragments is discussed systematically on the basis of a previous model for hyperfragments. The general formalism for the two-body and three-body mesic decay was developed. The polarization-direction correlation and the angular correlation for the two-body and the three-body decays are discussed together with the decay probability. The formalism was developed so as to include the isotopic spin selection rule ( DELTA I = 1/2 and 3/2) for the mesic decays. The theory was applied especially for the low mass number hypergragments where it was found that the branching ratios of the two-body and the three-body mesic decays of /sup 3/H/sub i and /sup 4/H/sub i, (/sup 3/ H/sub i yields /sup 3/He + i/sup -/)/(/sup 3/H/sub i yields D + p+ pi /sup -/) and (/sup 4/H/sub i yields /sup 4/He + pi /sup -/)/(/sup 4/H/ sub i yields /sup 3/H + p + pi /sup -/), could be used for the determination of the spins of both hyperfragments. The fraction of the p-wave decay rate for the free LAMBDA decay obtained from the reaction /sup 5/He/sub i yields /sup 4/He + p + pi where the decay proceeds through two-resonant states (p/sub 3/2/ and p/sub 1/2/) …

Abstract; The fission product data obtained during SM-1 Core I operation (June 1957 - May 1960) is reviewed briefly and interpreted. Evidence is presented to indicate that a fuel element defect was responsible for the high fission product activity level observed in the primary coolant. Relative escape coefficients are calculated and the defect size estimated. Anticipated fission product levels during SM-1 Core II and SM-1A Core I operation are estimated from alpha surface contamination data on completed fuel elements. The importance of in-line sampling for monitoring fission product activity is stressed as well as the need for failed fuel element detection methods.

Introduction: This is a final report on the evaluation of Kanigen electroless nickel plating for surfaces in contact with water and steam i a sodium heated AISI Type 316 stainless steel steam generator. The purpose of the coasting was to afford protection from stress corrosion cracking originating on the water-steam side of the unit. It has been concluded that the kanigen coating does not afford adequate protection for the services condition intended. This work was performed as part of the research and development program for the United States Atomic Energy Commission sodium Components Design Project.

Report discussing the evaluation of the "behavior of austenitic and ferritic stainless steels, iron-chromium-aluminum base alloys and nickel-base superalloys, in medium and high temperature simulated reactor environments" (p. 2).

Report documenting the progress of the Army Gas-Cooled Reactor Systems Program to develop a mobile nuclear power plant for military field operation.

"This is the third quarterly report on Task II dealing with Methods Development for Radio-Tracing of Coal Product Hydrocarbons With Tritium. The problem of accurate low-level tritium assay for tagged hydrocarbons has been resolved and attention is now primarily directed at the questions of tritium mobility and radio-chemical purity in tagged tracers."