Resource Type
Partner
Collection
Office of Scientific & Technical Information Technical Reports
2,488
Technical Report Archive and Image Library
456
Texas State Publications
104
Congressional Research Service Reports
77
Office of Technology Assessment
34
Federal Communications Reports
15
UNT Scholarly Works
2
Convair/General Dynamics Newsletters
1
D. Jack Davis Art Education Collection
1
Docs In The News
1
Serial/Series Title
United States Department of Energy Grand Junction Office Reports
256
United States Geological Survey Reports
90
Water Resources Investigations Reports
89
Argonne National Laboratory Reports
61
GJBX
41
Texas Motor Vehicle Traffic Accident Summaries
24
National Bureau of Standards Reports
22
San Antonio Monthly Reports
18
FCC Reports
15
Atomic Energy Commission Reports
13
90 More
Degree Department
Country
States
Year
Month
Language
Results:
1 - 24 of
3,178
next
HVDC-AC system interaction from AC harmonics. Volume 1. Harmonic impedance calculations. Final report
Improved methods are needed to characterize ac system harmonic behavior for ac filter design for HVDC systems. The purpose of this General Electric Company RP1138 research is to evaluate the present filter design practice and to investigate methods for calculating system harmonic impedances. An overview of ac filter design for HVDC systems and a survey of literature related to filter design have been performed. Two methods for calculating system harmonic impedances have been investigated. In the measurement method, an instrumentation system for measuring system voltage and current has been assembled. Different schemes of using the measurements to calculate system harmonic impedances have been studied. In the analytical method, a procedure to include various operating conditions has been proposed. Computer programs for both methods have been prepared, and the results of the measurement and analytical methods analyzed. A conclusion of the project is that the measurement and analytical methods both provided reasonable results. There are correlations between the measured and analytical results for most harmonics, although there are discrepancies between the assumptions used in the two methods. A sensitivity approach has been proposed to further correlate the results. From the results of the analysis, it is recommended that both methods should …
Date:
September 1, 1982
Creator:
Breuer, G D; Chow, J H; Lindh, C B; Miller, N W; Numrich, F H; Price, W W et al.
System:
The UNT Digital Library
Stress analysis of MFTF-B getter system bellows. Final report
The MFTF-B design includes a retractable getter system. Eight getter assemblies are planned (4 in each end plug). Electrically heated Ti wires are mounted on a telescoping insertion mechanism and, between machine shots (pulses), are extended into the chamber in the vicinity of inward-facing water-cooled magnet liners. During the shots, the sublimators must be withdrawn because they will intrude into plasma and diagnostic space. Each of the getter assemblies will be mounted on the exterior of the vacuum vessel. Bellows are used to keep essentially all of the mechanism isolated from the vessel vacuum. The bellows come in two sizes (8.25'' O.D. and 14'' O.D.). The smaller of the two bellows has been qualified by testing up to 94,000 cycles by empirically adjusting details of the bellow design (geometry and thickness). The process required 12 different test samples and took over a one-year period to accomplish. The bellows consistently failed in the inside diameter weld heat-affected zone. Results from stress analysis studies are presented.
Date:
April 1, 1982
Creator:
Tokarz, F. J.; Johnson, J. J.; Mukherjee, A. N. & Dalder, E. N.
System:
The UNT Digital Library
Energy-Exchange Project
The purpose of the study was to determine what energy savings can be achieved by coordinating the resources and requirements of two facilities, the 26th Ward Water Pollution Control Plant (WPCP) and a housing development named Starrett City with its own total energy system. It was determined that three energy exchange options were economically and technically feasible. These include: the transfer of digester gas produced at the 26th Ward to the boilers at the Starrett City's total energy plant (TEP); the transfer of hot water heated at the TEP to the 26th Ward for space and process heating; and the transfer of coal effluent waste water from the 26th Ward to the condenser cooling systems at the TEP. Technical information is presented to support the findings. The report addresses those tasks of the statement of work dedicated to data acquisition, analysis, and energy conservation strategies internal to the Starrett City TEP and the community it supplies as well as to the 26th Ward WPCP. (MCW)
Date:
April 1, 1982
Creator:
unknown
System:
The UNT Digital Library
NRC plan for cleanup operations at Three Mile Island Unit 2
This NRC Plan, which defines NRC's functional role in cleanup operations at Three Mile Island Unit 2 and outlines NRC's regulatory responsibilities in fulfilling this role, is the first revision to the initial plan issued in July 1980 (NUREG-0698). Since 1980, a number of policy developments have occurred which will have an impact on the course of cleanup operations. This revision reflects these developments in the area of NRC's review and approval process with regard to cleanup operations as well as NRC's interface with the Department of Energy's involvement in the cleanup and waste disposal. This revision is also intended to update the cleanup schedule by presenting the cleanup progress that has taken place and NRC's role in ongoing and future cleanup activities.
Date:
February 1, 1982
Creator:
Lo, R. & Snyder, B.
System:
The UNT Digital Library
Development of 400- to 450-MHz RFQ resonator-cavity mechanical designs
In the development of the radio-frequency quadrupole (RFQ) linac, the resonator cavity's mechanical design may be a challenge similar in magnitude to that of the development of the accelerator structure itself. Experience with the all-copper 425-MHz RFQ proof-of-principle linac has demonstrated that the resonator cavity must be structurally stiff and easily tunable. This experience has led to development of copper-plated steel structures having vanes that may be moved within a cylinder for tuning. Design of a flexible vane-to-cylinder radio-frequency (rf) joint, the vane, and the cylinder has many constraints dictated by the small-diameter cavities in the 400-MHz-frequency region. Two types of flexible, mechanical vane-to-cylinder rf joints are being developed at Los Alamos: the C-seal and the rf clamp-joint.
Date:
January 1, 1982
Creator:
Hansborough, L.D.
System:
The UNT Digital Library
Nuclear power in the Soviet Bloc
The growth of Soviet Bloc nuclear power generation to the end of the century is evaluated on the basis of policy statements of objectives, past and current nuclear power plant construction, and trends in the potential for future construction. Central to this study is a detailed examination of individual reactor construction and site development that provides specific performance data not given elsewhere. A major commitment to nuclear power is abundantly clear and an expansion of ten times in nuclear electric generation is estimated between 1980 and 2000. This rate of growth is likely to have significant impact upon the total energy economy of the Soviet Bloc including lessening demands for use of coal, oil, and gas for electricity generation.
Date:
March 1, 1982
Creator:
Davey, W.G.
System:
The UNT Digital Library
SPXCPL: two-dimensional modeling program of self-potential effects from cross-coupled fluid and heat flow (User's Guide and documentation for Version 1. 0)
The program is applicable to the calculation of self-potential effects due to fluid flow (electrokinetic effects) and heat flow (thermoelectric effects). The geological structure is two dimensional but the sources can be either finite line sources or point sources. The accuracy of the calculated potentials depends on the model discretization and the distance from the source(s). For the default mesh, the accuracy is usually a few percent at a distance of about one unit from the source. Surface boundary conditions for the primary problem require careful consideration as the form of the flow near the air-earth interface can have a profound effect on the resultant electric potentials. For temperature problems the appropriate boundary condition is a constant temperature, which is taken as zero. With this boundary condition there is a normal flux of heat at the surface and there will be induced electrical sources here, if the surface medium has a nonzero coupling coefficient. In the models, zero temperature at the surface is produced by giving the air a very large thermal conductivity.
Date:
March 1, 1982
Creator:
Sill, W. R. & Killpack, T. J.
System:
The UNT Digital Library
Extracted current densities from surface conversion sources of negative ions
The condition for extracting a maximum negative ion current density is found when the product of the radius of the negative ion conversion electrode, the cross-section for negative and positive ion recombination, and the density of positive ions in the ion source equals one. The optimum output is obtained at the highest positive ion density and the smallest electrode radius.
Date:
February 10, 1982
Creator:
Fink, J.H.
System:
The UNT Digital Library
Institutional and Financial Guide to Geothermal District Heating. Serial No. 2
General planning considerations which affect nearly every community are reviewed, and alternative operating structures which are available to communities are reviewed, including local governments, nonprofit cooperatives, private enterprises, and joint ventures. The financing options available to publicly-owned and privately-owned district heating systems are then summarized. The geothermal production and distribution activities most appropriate to each type of operating structure are reviewed, along with typical equity and debt funding sources. The tax advantages for private developers are described, as are the issures of customer contracts and service prices, and customer retrofit financing. The treatment is limited to an introductory overview. (LEW)
Date:
March 1, 1982
Creator:
unknown
System:
The UNT Digital Library
Relevance of biotic pathways to the long-term regulation of nuclear waste disposal. A report on Tasks 1 and 2 of Phase I. [Shallow land burial]
The purpose of the work reported here was to evaluate the relevance of biotic transport to the assessment of impacts and licensing of low-level waste disposal sites. Available computer models and their recent applications at low-level waste disposal sites are considered. Biotic transport mechanisms and processes for both terrestrial and aquatic systems are presented with examples from existing waste disposal sites. Following a proposed system for ranking radionuclides by their potential for biotic transport, recommendations for completing Phase I research are presented. To evaluate the long-term importance of biotic transport at low-level waste sites, scenarios for biotic pathways and mechanisms need to be developed. Scenarios should begin with a description of the waste form and should include a description of biotic processes and mechanisms, approximations of the magnitude of materials transported, and a linkage to processes or mechanisms in existing models. Once these scenarios are in place, existing models could be used to evaluate impacts resulting from biotic transport and to assess the relevance to site selection and licensing of low-level waste disposal sites.
Date:
July 1, 1982
Creator:
McKenzie, D. H.; Cadwell, L. L.; Cushing, C. E. Jr.; Harty, R.; Kennedy, W. E. Jr.; Simmons, M. A. et al.
System:
The UNT Digital Library
Acoustic agglomeration of power plant fly ash. Final report
The work has shown that acoustic agglomeration at practical acoustic intensities and frequencies is technically and most likely economically viable. The following studies were performed with the listed results: The physics of acoustic agglomeration is complex particularly at the needed high acoustic intensities in the range of 150 to 160 dB and frequencies in the 2500 Hz range. The analytical model which we developed, although not including nonlinear acoustic efforts, agreed with the trends observed. We concentrated our efforts on clarifying the impact of high acoustic intensities on the generation of turbulence. Results from a special set of tests show that although some acoustically generated turbulence of sorts exists in the 150 to 170 dB range with acoustic streaming present, such turbulence will not be a significant factor in acoustic agglomeration compared to the dominant effect of the acoustic velocities at the fundamental frequency and its harmonics. Studies of the robustness of the agglomerated particles using the Anderson Mark III impactor as the source of the shear stresses on the particles show that the agglomerates should be able to withstand the rigors of flow through commercial cyclones without significant break-up. We designed and developed a 700/sup 0/F tubular agglomerator of …
Date:
January 1, 1982
Creator:
Reethof, G. & McDaniel, O.H.
System:
The UNT Digital Library
Simulating the operation of a port contender with SIM 4: applying Monte Carlo techniques to the Gandalf PACX IV
A simulation program, SIM 4, has been written which utilizes usage statistics to project PACK IV performance. Using this program, system managers can allocate scarce resources in an efficient manner.
Date:
March 1, 1982
Creator:
Totendino, L.F.
System:
The UNT Digital Library
Fast-neutron total and scattering cross sections of elemental palladium
Neutron total cross sections of palladium are measured from approx. = 0.6 to 4.5 MeV with resolutions of approx. = 30 to 70 keV at intervals of less than or equal to 50 keV. Differential neutron elastic- and inelastic-scattering cross sections are measured from 1.4 to 3.85 MeV at intervals of 50 to 100 keV and at 10 to 20 scattering angles distributed between approx. = 20 and 160/sup 0/. The experimental results are compared with respective quantities given in ENDF/B-V and used to deduce an optical potential that provides a good description of the measured values.
Date:
June 1, 1982
Creator:
Smith, A. B.; Guenther, P. T. & Whalen, J. F.
System:
The UNT Digital Library
High-temperature turbine technology program hot-gas path development test. Part II. Testing
This topical report of the US Department of Energy High-Temperature Turbine Technology (DOE-HTTT) Phase II program presents the results of testing full-scale water-cooled first-stage and second-stage turbine nozzles at design temperature and pressure to verify that the designs are adequate for operation in a full-scale turbine environment. Low-cycle fatigue life of the nozzles was demonstrated by subjecting cascade assemblies to several hundred simulated startup/shutdown turbine cycles. This testing was accomplished in the Hot-Gas Path Development Test Stand (HGPDTS), which is capable of evaluating full-scale combustion and turbine nozzle components. A three-throat cascade of the first-stage turbine nozzle was successfully tested at a nozzle inlet gas temperature of 2630/sup 0/F and a nozzle inlet pressure of 11.3 atmospheres. In addition to steady-state operation at the design firing temperature, the nozzle cascade was exposed to a simulated startup/shutdown turbine cycle by varying the firing temperature. A total of 42 h at the design point and 617 thermal cycles were accumulated during the test periods. First-stage nozzle test results show that measured metal and coolant temperatures correspond well to the predicted design values. This nozzle design has been shown to be fully satisfactory for the application (2600/sup 0/F), with growth capability to 3000/sup …
Date:
March 1, 1982
Creator:
Horner, M. W.
System:
The UNT Digital Library
Microfaunal evidence of age and depositional environments of the Cerro Prieto section (Plio-Pleistocene), Baja California, Mexico
Microfossils including benthic and planktic foraminifera, ostracodes, calcareous algae, fish skeletal material, and fragments of pelecypods were found in 14 core samples from depths of 185 to 1952 m in the Cerro Prieto geothermal field, providing evidence of both the age and depositional history of sediments comprising the 3000-m-thick Pliocene and Pleistocene section in this area. Ostracodes of brackish water and marine origin constitute the most common microfossils present in this sequence occurring in 8 samples; in situ littoral and neritic species of benthic foraminifera occur in 5 samples with planktic species present in 2 samples. Distributional patterns of ostracodes and foraminifera together with previously analyzed lithofacies (Lyons and van de Kamp, 1980) indicate that the Cerro Prieto section represents an intertonguing complex of alluvial, deltaic, estuarine, and shallow marine environments deposited along the front of the Colorado River delta as it prograded across the Salton Trough during Pliocene and Pleistocene time. Foraminiferal evidence indicates that a sand and shale unit commonly present at depths between 700 and 1100 m represents a significant mid-Pleistocene marine incursion in the Cerro Prieto area. Tentative correlation of the Cerro Prieto section with the well dated Palm Springs Formation of the Imperial Valley, California …
Date:
January 1, 1982
Creator:
Ingle, J.C. Jr.
System:
The UNT Digital Library
Development of enhanced heat transfer/transport/storage slurries for thermal-system improvement
None
Date:
June 1, 1982
Creator:
Kasza, K. E. & Chen, M. M.
System:
The UNT Digital Library
Electron bremsstrahlung angular-distribution fits for atomic numbers 1 less than or equal to Z less than or equal to 92, and incident-electron energies 1 keV less than or equal to T less than or equal to 500 keV
The analytic fit of a simple expression to the electron bremsstrahlung angular distribution cross section d/sup 2/sigma/dkd..cap omega.. (differential in the emitted photon energy k and angle ..cap omega..) is investigated. Optimal choices for the fit parameters are determined and fit coefficients are tabulated for a large number of neutral-atom cases. Results are also presented for fits to the relativistic Coulomb-Born approximation. Comparisons between the screened neutral-atom results and the Coulomb-Born results are made. Discrepancies reported to exist between angular distribution cross sections and fit coefficients published by Tseng, Pratt and Lee are confirmed and understood in terms of their choice of fit weight function.
Date:
January 1, 1982
Creator:
Kissel, L.
System:
The UNT Digital Library
Design considerations for a steam-injection pilot with in-situ foaming
This report reviews the necessary aspects of the planning, operation, evaluation, environmental impact and cost to implement a field pilot of steam injection with in-situ foaming. The Stanford University Petroleum Research Institute (SUPRI) is planning to implement such a pilot in Kern County, California. The cost of the pilot will be shared by the US Department of Energy and an oil company. Some important aspects of drilling and completion programs and their specifications, permits from regulatory bodies, and downhole tools to improve steam stimulation are discussed. The essential surface facilities which include water treatment plant, steam generator, demulsifier and dehydrator are considered. The necessary laboratory research in support of the pilot has been recommended. The formation evaluation and reservoir engineering effort for the pilot has been divided into three phases: reservoir definition, reservoir monitoring and post-pilot study. Appropriate techniques applicable to each phase of the test have been discussed. The environmental impact regulations as related to the steam injection process have been considered. In particular, the environmental problems associated with the burning of crude oil and desulfurization of flue gas have been discussed. Other environmental considerations such as solid and liquid waste disposal, health and safety are also discussed. An …
Date:
August 1, 1982
Creator:
Siddiqui, M.H.; Sanyal, S.K. & Horn, A.J.
System:
The UNT Digital Library
Study of impurities in the Tandem Mirror Experiment using extreme-ultraviolet spectroscopy
Impurities in the Tandem Mirror Experiment (TMX) have been studied using extreme ultraviolet spectroscopy. Three time-resolving absolutely-calibrated normal-incidence monochromators, one on each section of TMX, were used to study the impurity emissions in the wavelength range of 300 A to 1600 A. The instruments on the east end cell and central cell were each capable of obtaining spatially-resolved profiles from 22 chords of the plasma simultaneously while the instrument on the west end cell monitored the central chord. The impurities identified in TMX were carbon, nitrogen, oxygen, and titanium. Emphasis was placed upon determining the impurity densities and radiated power losses of the central cell; results indicate that the impurity concentrations were low - less than 0.4% for each species - and that less than 10% of the total net trapped neutral beam power was lost to radiation. The use of titanium gettering on the central cell walls was observed to decrease the brightnesses of singly- and doubly-ionized carbon and oxygen in the central cell plasma. In the end cells, oxygen was the main impurity with a concentration of about 1.5% and was injected by the neutral beams; the other impurities had concentrations of about 0.5%. Radiation losses from the …
Date:
May 12, 1982
Creator:
Strand, O. T.
System:
The UNT Digital Library
Terrestrial fate of coal-liquid constituents: behavior of alkyl anilines in soil
The low molecular weight aromatic amines (anilines) are important water soluble constituents of coal liquids. The impact of anilines released to the terrestrial environment will largely depend on their mobility and persistence. Studies were conducted to investigate those processes governing the mobility and persistence of the alkylanilines, namely, soil sorption and chemical/microbial degradation. Soil sorption measurements were conducted on aniline and several methyl substituted anilines on A and B horizons of a soil profile collected from Davies County, Kentucky. The magnitude of sorption was large in all horizons. Sorption in the B horizons was larger than in the A horizon for many of the anilines studied, indicating the importance of both the mineral matrix and organic carbon content of the soil in determining the magnitude of sorption. Results of these measurements indicate that movement of the anilines through the soil would be significantly attenuated by sorption reactions. Aniline sorption measurement in the A horizon after removal of the organic matter and in the B/sub 22/ horizon after removal of amorphous iron oxides and crystalline iron oxides indicate that organic matter largely controls aniline sorption in the A horizon, while crystalline iron oxides and phyllosilicates are important in the B horizons. …
Date:
July 1, 1982
Creator:
Felice, L. J.; Zachara, J. M. & Rogers, J. E.
System:
The UNT Digital Library
Use of ICRH for startup and initial heating of the TMX-U central cell
Ion cyclotron resonance heating (ICRH) was evaluated and it was found to be satisfactory for use in establishing the conditions necessary to form a thermal barrier in TMX-upgrade (TMX-U). We discuss the constraints that must be satisfied in order to maintain a plasma, and outline a complete startup scenario that ends with the plasma at design parameters. The detailed discussions in this report concentrate on those parts of startup where ICRH is necessary. The ability of ICRH to couple power into a plasma at the fundamental ion cyclotron resonance, w/sub ci/, is determined from experiments with a half-turn loop antenna in the Phaedrus tandem mirror central cell. From these experiments, we get the empirical scaling that shows power deposited in the plasma is proportional to the plasma density.
Date:
May 1, 1982
Creator:
Molvik, A.W. & Falabella, S.
System:
The UNT Digital Library
Development of a procedure to estimate runoff and sediment transport in ephemeral streams
A distributed hydrologic model for application on small, semiarid watersheds is developed. The distributed model incorporates simplified routing schemes to include the influence of transmission losses on runoff. A sediment transport model, by sediment size fractions, is developed to compute transport capacity and sediment yield in noncohesive, alluvial channels. Based on available information published in soils and topographic maps and on channel and bed sediment characteristics, the procedure is used to estimate runoff rates and amounts together with sediment yields from semiarid watersheds. Example applications include flood frequency analysis and sediment yield. The procedure requires a minimum of observed data for calibration and is designed for practical applications.
Date:
January 1, 1982
Creator:
Lane, L.J.
System:
The UNT Digital Library
Collisionally excited few-electron systems: theoretical introduction and survey. [2-200 keV]
We consider excitation, ionization, and charge transfer in collisions of protons (and antiprotons) with the single-electron targets H, He/sup +/, and Li/sup 2 +/. These collisions are first compared to other types of ion-atom collisions. A brief review of our own theoretical method is given; in particular we describe how we allow for both large charge transfer and ionization probabilities while retaining the computational efficiency that allows us to consider a variety of collision partners and collision energies. We comment on the comparison of our results to other theoretical work and to experiment. The qualitative features of the various inelastic cross sections are discussed, in particular how they scale with collision energy, target nuclear charge, and the sign of the projectile charge. 15 references, 6 figures.
Date:
January 1, 1982
Creator:
Ford, A.L.; Reading, J.F. & Becker, R.L.
System:
The UNT Digital Library
Measurements of /sup 234/U, /sup 238/U and /sup 230/Th in excreta of uranium-mill crushermen
Uranium and thorium levels in excreta of uranium mill crushermen who are routinely exposed to airborne uranium ore dust were measured. The purpose was to determine whether /sup 230/Th was preferentially retained over either /sup 234/U or /sup 238/U in the body. Urine and fecal samples were obtained from fourteen active crushermen with long histories of exposure to uranium ore dust, plus four retired crushermen and three control individuals for comparison. Radiochemical procedures were used to separate out the uranium and thorium fractions, which were then electroplated on stainless steel discs and assayed by alpha spectrometry. Significantly greater activity levels of /sup 234/U and /sup 238/U were measured in both urine and fecal samples obtained from uranium mill crushermen, indicating that uranium in the inhaled ore dust was cleared from the body with a shorter biological half-time than the daughter product /sup 230/Th. The measurements also indicated that uranium and thorium separate in vivo and have distinctly different metabolic pathways and transfer rates in the body. The appropriateness of current ICRP retention and clearance parameters for /sup 230/Th in ore dust is questioned.
Date:
July 1, 1982
Creator:
Fisher, D. R.; Jackson, P. O.; Brodacynski, G. G. & Scherpelz, R. I.
System:
The UNT Digital Library