The Vernatherm unit is a temperature sensitive capsule which translates temperature change to mechanical movement of a brass plunger. A change in phase of a hydrocarbon contained in a cylinder caused by temperature change, causes movement of the brass plunger. The units are available for various temperature ranges. The adaptation considered was to monitor the outlet water temperature from individual process tubes in the ``G`` pile. The purpose of the test was to determine the magnitude of error, if any, that is induced in a standard Vernatherm unit of known calibration when subjected to gamma irradiation. The accuracy of the units prior to irradiation was within 1.25 F. An examination of the calibration curves shows that a hysteresis effect in the hydrocarbon of the unit causes the curve of descending temperature to be displaced from the ascending temperature curve. The effects of irradiation were to decrease the accuracy to within 3.75 F. After a total exposure of 17,416 {times} 10{sup 4}R at 1.1 MEV. Since the exposure of 11,441 {times} 10{sup 4}R is equivalent to approximately 2,000 months exposure in the pile at 250 MW they can conclude that the effect of radiation is not detrimental since the increase in …

None

Authorization has been received in the form of Modification No. 5 to Directive HW-158, dated March 23, 1951 to provide the necessary equipment and piping in the currently planned UO{sub 3} plant to permit the segregation of UO{sub 3} arising from the processing of stored metal waste (TBP) from that arising from ``current`` pile operation (Redox). In anticipation of this, the S Division, Manufacturing Divisions, requested that a study be made of the feasibility and cost of providing facilities for such segregation. This report is the result of that study. It concludes that by providing additional liquid storage and handling equipment, the desired segregation can be accomplished at a cost estimated to be approximately $128,000. $106,500 would be for Construction and $21,500 for Engineering. The schedule for this work will be reflected in the forthcoming modification to the C-361 Project Proposal. The general method of operation is alternately to store and process solution from TBP and Redox. The solution from TEP will be of a composition equivalent to the formula UNH and will require five days each week to process in the decomposition pots. The solution from Redox is received as 60% UNH and is batch concentrated in the storage …

Operation, rehabilitation, and expansion of Hanford Works was undertaken by GE from Sept. 1946 to the end of 1950. As a result of engineering progress, graphite reactors continue to be the country`s primary source of plutonium in production quantities; at the end of 1950, the plutonium production rate from the Hanford reactors was 299% of the 1946 rate with a 67% increase in reactor facilities. Improvements to existing plant facilities and processes resulted in savings of $53.3 M; in addition, it would have been necessary, in order to produce the amount of Pu delivered through 1950, to have constructed facilities costing $225.4 M if the following improvements had not been made: an irradiation-stable uranium slug; annealing of graphite; increased operating power level of the reactors; and improved separation methods. Tritium production, health/safety, and community management are mentioned.

Report documenting the suitability of Utah for plant locations to produce synthetic liquid fuels, based on raw materials, water sources, and local interest.

Report documenting the suitability of New Mexico for plant locations to produce synthetic liquid fuels, based on raw materials, water sources, and local interest

None

None

None

None

None

None

None

None

None

None

None

None

Memorandum presenting the use of the modified slender-body method to predict the lift and moment interference of triangular wing-body combinations adapted to combinations with other than triangular wings. The methods are applied to the prediction of the lit-curve slopes of nearly 100 triangular, rectangular, and trapezoidal wing-body configurations.

Report presenting an investigation of the effects of many of the parameters significant to wing flutter on several untwisted rotating models to determine their significance with respect to stall flutter of propeller blades. The parameters included torsional stiffness, section thickness ratio, sweepback, length-chord ratio, section center-of-gravity location, blade taper, Mach number, and fluid density. Results regarding the considerations on method of presentation, experimental data and discussion, some possible applications, and a comparison of experiment with classical-flutter theory are provided.

Report presenting the use of the modified slender-body method to predict the lift and moment interference of triangular wing-body combinations to evaluate combinations with non-triangular wings. The method is applied to the prediction of lift-curve slopes of nearly 100 triangular, rectangular, and trapezoidal wing-body configurations.

A preliminary analytical evaluation of the air and fuel specific-impulse characteristics of hydrogen, a-methylnapthalene, and graphite carbon has been made. Adiabatic constant-pressure combustion flame temperatures for each fuel at several equivalence ratios were calculated for an initial air temperature of 560 degrees R and a pressure of 2 atmospheres.

None

None