Abstract: "The ductility of Type 310 stainless steel T-joints brazed with GE-62 brazing alloy was measured at room temperatures 1200, 1650, and 1800 F. The measure of ductility was taken as the plastic axial strain required to crack braze fillets in T-section tensile specimens. At elevated temperatures, the ductility of as-brazed joints approximated that of the stainless steel, but at room temperature the brazed joints had only one-tenth the ductility of the base metal. Annealing for 16 hr at 1800 F in air was found to triple the room-temperature ductility of the brazed joint."

From abstract: "The inert-gas metal-arc welding process was used to determine weldability studies of various aluminum alloys that are being considered for use as can materials. The solid-phase and induction welding processes were also investigated for making can closures."

From introduction: "This report summarizes the work done on a study of fused-salt systems in a search for new liquid fuels suitable for use in a nuclear power reactor."

The radiological aspects of a proposal to recover some of the heat now wasted in cooling water from the Hanford reactors by using the hot water as boiler feed for the steam plants in the 100 Areas are evaluated. The radioactive material in the hot effluent water will contaminate the boiler feed water system, cause additional radiation exposure of personnel, and increase the cost of maintenance and radiation protection, but very little radioactive material will be carried over into the steam system. At present steam loads, this proposal is economically attractive; other proposals being considered may nullify any savings from this one. 21 refs., 1 fig., 10 tabs.

Abstract: A device is proposed for confining charged particles to a localized region of space by means of the alternating electric field of a resonant cavity. The motion of single electrons in the field is stable. The limitations to particle density and temperature are discussed, and found to be too severe to allow the device to serve as a reactor, although it might be a useful laboratory tool.

Report discussing an impinging experiment "to test the pitting tendencies of different qualities of water," specifically, alum coagulated water without sodium dichromate, alum coagulated water plus 2 ppm sodium dichromate, and ferrifloc coagulated water without sodium dichromate.

Monthly report documenting Imperial Sugar operational expenses for the year, broken down by actual sales and production, with estimated operational numbers for the remainder of the year.

None

Imperial Sugar Company report of stock information as the company relates to Sugarland Industries.

Report for the Imperial Sugar Company describing the estimated daily cash balances for the company.

"The relation of Whitcomb's "area rule" to the linear formulas for wave drag at lightly supersonic speeds is discussed. By adopting an approximate relation between the source strength and the geometry of a wing-body combination, the wave-drag theory is expressed in terms involving the areas intercepted by oblique planes or Mach planes. The resulting formulas are checked by comparison with the drag measurements obtained in wind-tunnel experiments and in experiments with falling models in free air. Finally, a theory for determining wing-body shapes of minimum drag at supersonic Mach numbers is discussed and some preliminary experiments are reported" (p. 757).

Report presenting the results of an investigation of cross-sectional-area distribution, nacelle configuration, and landing-gear-fairing configuration on the minimum drag characteristics of a model of a four-engine bomber airplane with a low-aspect-ratio triangular wing. The lateral stability characteristics are also included.

Memorandum presenting the application of the concept of indicial functions to the analysis of the aerodynamic phenomena associated with the short-period pitching mode of wings in subsonic and supersonic flight. Simple physical relationships are pointed out and are used to study the effect on the rotary-damping-moment coefficient of changes in center-of-gravity position, Mach number, aspect ratio, plan form, frequency, and thickness.

From Summary: "A summary has been made of the available experimental data on division of normal-force loads between the wing and fuselage of aircraft. Comparison of the experimental values with theoretical calculations which include interference effects shows good agreement in general with the greatest differences occurring near a Mach number of 1.0. At high angles of attack, above the range of linear lift curves, the proportion of the total wing-fuselage load carried by the wing decreases and this effect occurs throughout the subsonic- and transonic-speed region."

"Theoretical calculations of the stability derivatives at supersonic speeds for a high-speed airplane configuration are presented. The range of Mach numbers considered includes those cases for which the wing and tail surfaces have subsonic leading edges, supersonic leading edges, and combinations of the two. The methods of analysis are discussed; these represent detailed consideration of the important effects and contributions of the various airplane components utilizing available theories and theoretically justifiable and reasonable approximations" (p. 1).

Report presenting an experimental investigation at Mach number 1.90 to determine the effect of a diverter-type boundary-layer removal system on the performance of a scoop inlet. The supersonic portion of the inlet consisted of a two-dimensional, reverse Prandtl-Meyer turn followed by a constant-area throat. Results regarding the effect of fuselage position and subsonic diffuser performance are provided.

Report presenting an experimental investigation of the application of transpiration air-cooling to the combustion-chamber wall of an afterburner. Results regarding the typical temperature and pressure profiles, correlation of wall temperatures, distribution of cooling-air flux density, longitudinal distribution of cooling air, longitudinal distribution of wall temperature, effect of permeability on cooling-air requirements, and fabricating and operating problems are provided.

Report presenting an investigation to determine the effects of a horizontal tail on the longitudinal stability characteristics of a swept-back, twisted, and cambered wing in combination with a fuselage and various combinations of high-lift and stall-control devices. The ideal placement of the horizontal tail appeared to be at 6 percent wing semispan below the wing-root-chord plane.

From Introduction: "The rolling-pullout maneuver (any maneuver in which rolls occur during high g flight conditions) has been shown to be pertinent to design considerations from the standpoint of the loads produced on a vertical tail (refs. 1 to 3). In order to understand this problem better, the results of an analytical study of effects of large variations of some of the lateral-stability-derivative coefficients on the maximum angle of sideslip at first peak of its oscillation are presented in this paper. Also, expressions for estimating the effects of small variations of or errors in these coefficients on the maximum sideslip angle have been developed and are presented. "

Report presenting the effect of preinjection-fuel temperature on vaporization rates and combustion efficiency of a 16-inch ram-jet engine for two different fuels. Variation of the location of the fuel injectors and use of control sleeves were also explored.

Report presenting an investigation in the high-speed 7- by 10-foot tunnel to determine the effectiveness of a spoiler-slot-deflector combination in producing rolling moments in the transonic speed range at angles of attack as high as 24 degrees over a range of Mach numbers. The wing had an aspect ratio of 4, a taper ratio of 0.6, an unswept quarter-chord line, and NACA 65A006 airfoil sections.

Report presenting an investigation to determine the performance of a conical-nose supersonic diffuser at angle of attack. The inlet had a pivoting cone which could be oriented to any of several angles independent of the angle of attack of the diffuser. Results regarding total-pressure recovery and mass-flow characteristics, cowl lip position, cone position relative to angle of attack, shadowgraphs, and contour maps are provided.

Report presenting a simplified limiting-blade-loading parameter for axial-flow-compressor blade elements derived from the application of a separation criterion used in two-dimensional boundary-layer theory to a typical suction-surface velocity distribution of a compressor blade element at design angle of attack. Results regarding two-dimensional cascade, compressor rotors, and compressor stators are provided.

Report presenting a flight investigation to study in detail the response of an airplane structure during buffeting. Measurements of acceleration on selected points were made during buffeting for two different conditions of lift coefficient and Mach number and the time histories of acceleration were studied using electrical frequency-analysis techniques. Results regarding the ground response measurements, response to buffeting excitation, verification of the measured results, and the pilot's observation of the buffeting are provided.