The report includes summary reports in five areas (1) High-speed computer program, (2) Switching circuit theory, (3) ILLIAC use and operations, (4) IBM 650 use and operation, and (5) General laboratory information.

Potential methods have been examined for the reclamation of high boiler arising from the degradation of polyphenol materials in use as reactor coolants and moderators. To define the chemistry of potential reclamation processes, model polyphenol compounds were used. These include biphenyl, o, m and p-terphenyl, and p-quaterphenyl. Emphasis has been on hydrocracking, redistribution (reaction with benzene), and partial reduction. Preliminary study has been made of the application these techniques to high boiler from Santowax-OM used in the OMRE. The three methods show promise but require detailed investigation to minimize carbon formation to locate optimum operating conditions,.

Progress reports from four divisions are included: (1) Division of Biophysics; (2) Division of Clinical Investigation; (3) Division of Nucleoprotein Chemistry; and (4) Radiochemistry Section.

Data obtained in test of Bureau of Mines electrocerium are presented. The cerium was subjected to spectrochemical analysis, x-ray diffraction analysis, thermal analysis, metallographic tests, and high-pressure experiments.

An analysis to screen the various particle-collection systems which might be used for sampling the upper atmosphere with a rocket sampling vehicle has been undertaken. Although the current model of the Goetz Aerosol Spectrometer is not suitable, a high-flow-rate sampler of this general type, if it can be designed, appears promising. The design of such a sampler will be undertaken in future work. If a workable design is possible, this method would appear to be the most promising of all.

The relation between the maximum permissible transverse energies of particles that can be focused, the azimuthal energy, and the beam width is discussed relative to Megatron coil design. It is shown that deep potential wells for focusing can be obtained only at the expense of a narrow beam. (C.J.G.)

Crystallographic data on intermetallic Pu compounds are presented. The compounds are described in alphabetical order of the alloying compound. A table is included in which all of the Pu compounds and isotopes mentioned in the report are listed along with the corresponding references.

Extraction of HNO3 by triaryl amine was studied by equilibrating equal volumes of aqueous and organic phases at 25C. At HNO3 concentrations of 2 to 10 N the acid in the organic phase in excess of that equivalent in the amine concentration was proportional to the concentration of HNO3 in the equilibrated aqueous phase. other workers report similar results with nitric acid and tri-n-octyl amine in benzene. Zirconium extractions carried out at 10g Zr/1 with 0.35 M TLA nitrate in toluene showed a fourth power dependence of EZR on HNO (aq) over the range 2 to 10N. Maximum distribution ratios calculated from samarium scouting experiments using amines in kerosene were about 5 x 10(-3) for Primene JMT, 10(-4) for TLA, 10(-5) for S-24, and less than zero for DTDA. Distribution rations in the extractions ranged from ERu = 0.12 for 0.35M TLA shaken with an initially new 2N HNO3 solution for 15 minutes. Data on Zr and Ru standardization in TLA solution for spectrophotometric analyses are included.

An electromagnetic quadrupole lane system been developed and constructed which will be used to study the focusing of beta-rays. A current-carrying wire analog has also been developed to make preliminary studies of the accessory lane parameters.

The corrosion of INOR-8 and Inconel dissolver components used in the fluoride volatility process for the dissolution of zirconium with anhydrous HF in molten salts was investigated. Ten dissolution runs were made using simulated subassemblies formed from Zircoloy-2. The dissolver and components were made from INOR-8. Both the dissolver vessel and draft tube were examined several times during the series of runs. The solids which formed at different areas in the system were also analyzed. The results showed that the corrosion of the INOR-8 dissolver was greatest at the salt-off gas interface and at the HF gas inlet. Almost all of the corrosion took place during run 10 when no zirconium was present. Portions of the dissolver were cleaned after run 10 and sent to BMI for evaluation. The results of the Battelle metallographic examinations of the portions are included along with several photographs. The results with Inconel tubes in the copper-lined hydro-fluorinator confirmed the observations that the liquid gas interface areas were the most susceptible to attack.

The original goal of this investigation was to compare the thermodynamic characteristics of the gases in and behind the shock fronts in gases at initial pressures in the millimeter range and to compare these characteristics in the geometries of single and double discharges. The shock fronts were not visible, so it was not possible, at these pressures, to get visual data from the shock front itself. The parameters giving the properties of the gases were faces. Measurements made with an image converter camera (which is still in the development stage) agree well with these made with a photomultiplier tube. Differences are observed between the front velocities in the cases studied. These are of the order of 3 to 15 per cent. Considering the nature of the shot to shot fluctuations in the discharges and the inductance variation between the single and double discharges represent a physical difference. The mathematical treatment which says that two equal strength colliding with a wall behaves, has not been shown to be inadequate by this investigation. It was hoped that a stronger confirmation could be fien to the theory, but the accuracy of the data does not warrant it.