Abstract: "The ductility of Type 310 stainless steel T-joints brazed with GE-62 brazing alloy was measured at room temperatures 1200, 1650, and 1800 F. The measure of ductility was taken as the plastic axial strain required to crack braze fillets in T-section tensile specimens. At elevated temperatures, the ductility of as-brazed joints approximated that of the stainless steel, but at room temperature the brazed joints had only one-tenth the ductility of the base metal. Annealing for 16 hr at 1800 F in air was found to triple the room-temperature ductility of the brazed joint."

Survey of properties of materials which might be suitable for use in various locations in a supercritical-water reactor. Properties examined include tensile strength, rupture strength, endurance strength, Young's modulus, tensile elongation, coefficient of thermal expansion, coefficient of thermal conductivity, density, nominal composition, usual heat treatments and thermal-neutron-absorption cross sections.

This report follows a preliminary study on uranium migration in pressed and sintered UO2-bearing bodies based on MoSi2 or Al2O3.

From abstract: "The stability of polystyrene and phenolic ion-exchange resins to radiation from a Co60 source and from absorbed Ce144-PR144 was investigated. Sulfonated polystyrene cation-exchange resins lost 10 to 20% of their capacity per watt-hour of radiation absorbed per gram of oven-dry resin, while the quaternary amine anion-exchange polystyrene resins lost about 40%. Phenolic cation-exchange resins lost only 1%."

Technical report covering the technology of hot-pressed beryllium production and its rapid advancement toward the end of 1949. Part I is devoted to corrosion studies made on hot-pressed and vacuum cast extruded metal which was considered representative of production. Part II is concerned with the results of tests made on special cast and hot-pressed beryllium which contained added impurities. [From Introduction]

From introduction: "The work described in this report was carried out as part of the feasibility study (ORNL-117) of a supercritical water reactor (SCWR) for use in nuclear propulsion of aircraft. The object of this work was to study the dynamic behavior of a particular design of supercritical water reactor. Numerical results are presented in Appendix I."

Report discussing an impinging experiment "to test the pitting tendencies of different qualities of water," specifically, alum coagulated water without sodium dichromate, alum coagulated water plus 2 ppm sodium dichromate, and ferrifloc coagulated water without sodium dichromate.

Report discussing tests conducted in an attempt to adapt a micromanometer for use in measuring variations of about 0.003 mm Hg in atmospheric pressure. Additionally, a method for making full use of the micromanometer sensitivity and extending its range is described.

Introduction: "During the last quarter, members of the Chemical Development Group have been concerned with six major projects. (1) thermal and radiation properties of organic materials as moderators and coolants, (2) thermal and radiation stability of mirconium hydride, (e) reactor accessibility (transport of radioactive materials in cooling systems, ................. There have been, in addition, a number of smaller service projects, mostly of an analytical nature.:

The Technical Data Book compiles useful chemical and physical data of feed materials, chemicals, uranium intermediates and end products of the FMPC, Fernald, Ohio. The data presented encompass the process operations involved in the original integrated FMPC project, the uranium hexafluoride reduction plant and the throium plant.

Abstract: Cadmium ratios for very thin (neutron and beta-wise) foils of thorium, gold, vanadium and indium have been measured in the glory hole of the WBNS. These cadmium ratios, together with the known thermal cross sections and a given calculated resonance integral for gold, were used to evaluare the resonance integrals of thorium, vanadium, and indium.

"The objective of the Waste Processing Development Project is to investigate the feasibility of concentrating high-level waste streams to their minimum volume and packaging such waste in containers that are primarily safe and transferable...This report describes experimental and pilot plant development work and enlarges upon two schemes: (1) the concentration of dilute waste solutions to 60 or 70 percent solids slurries in a batch slurry evaporator, removal of the residual water from the waste by evaporation, and fusion in the final waste container; (2) accomplishment of the complete concentration and fusion cycle in one piece of equipment on a continuous basis."

This technical report is intended as a brief description of the free convection problem existing in the various annuli of the SIR Mark A rotating plugs. It is by no means a complete report of the plug "hot tests", but merely records some of the more significant experimental observations and presents a few of the theories and calculations made to explain the observed free convection phenomenon. The general discussion which follows is chronological. Details of analyses are relegated to the Appendix.

Report discussing an investigation aimed at building information regarding the titanium-uranium system in the uranium-rich region.

Report discussing the analysis of beta and gamma radiations of U²⁴⁰ and Np²⁴⁰ with a magnetic lens and scintillation spectrometers.

Abstract: "Some embrittling effects noted in Zr have been explained by the presence of hydrogen. This phenomenon was initially correlated with the existence of a second phase in the microstructure. The amount of this phase is reduced by vacuum annealing and shows a direct correlation with the hydrogen content of the specimen. X-ray and electron-diffraction evidence identifies the phase as ZrH. Observations are given on the solubilities, diffusion rates and equilibrium pressures of hydrogen in zirconium, and the application of these data to the removal of hydrogen."

The following document analyzes the effects of extracting boron from sodium chloride with ethyl alcohol.

"In the course of an ultracentrifugal investigation of uranyl fluoride solutions, their densities and refractive indices were measured as a function of concentration. The measurements were carried out near 25 and 30 C and if necessary extrapolated to 25.0 and 30.0 C from the observed temperature coefficients. Most density data were obtained pycnometrically (25 cc samples) and a few gradient tubes. The refractive index measurements were carried out with a Bausch and Lomb dipping refractometer (calibrated with "known" solutions) using sodium-D light. The materials used and the analytical procedures were described earlier. Although the accuracy of the density measurements was approximately one part in 10,000, the accuracy of the determinations at high UO2F2 concentration is considerably less, in view of the uncertainty in the uranium analyses."

Abstract: "A method is described for determining moisture on uranium and uranium oxides. This method should also be applicable to solid samples which, when heated, do not decompose to form water or liberate a substance which will react with Fischer's reagent. The method should be especially applicable to samples which are insoluble in alcohol or Karl Fischer reagent under normal titration conditions, or which will themselves react with the reagent. The amount of moisture on uranium and uranium oxide was found to be 0.02% except when the oxide was found to be 0.02% except when the oxide source was uranyl sulfate. In this case, the moisture content was found to be 0.1%. Modifications of the procedure and apparatus are presented for improving the accuracy and shortening the time necessary for the determination."

The following report describes and experimental method used to determine equation of state of materials under strong shock. The method was devised of simultaneously measuring the velocity of the shock through a plate, and the velocity of the free surface after the shock has traversed the plate. Further analysis is presented.

A report about Ta-W, Ta-Mo, and W-Mk thermocouples calibrated in a vacuo against a Pt-Pt, 10% Rd couples at temperatures up to 1500°C.

Abstract: "The spectrum of plutonium has been observed over the temperature range of 2000 to 2600 C and a wavelength coverage of 3476 to 6888 A. The spectrum was excited in a modified King furnace."

This report calculates the alpha half-life of americium-243 and reporting a measurement error.

Abstract: "Extraction equipment of the multistage mixer-settler type has been found useful for providing the intensive contact between phases that is required in processes involving complex compounds of the heavy metals. In this report, the factors of mixer-settler design and operation are discussed with reference to the known types of mixer-settler units. Following this review, a detailed description is given of mixer-settler units constructed and installed in this laboratory."