From introduction: "This report presents the apparent viscosities of supernate-sludge slurries prepared synthetically to simulate the conditions known to exist in the waste storage tanks, but with fission products and plutonium absent."

From statement of objectives: The purposes of the work described in this report are to provide data useful for designing and operating the dissolver solution clarification equipment to be installed in the Redox production plant.

The process of age calculation for Hanford exponential lattices containing aluminum-matrix slugs, where the sums run over the materials of the lattice cell.

The following document describes data collected from a 14-month period of analyzing crustaceans containing radioactivity. Provided is information based on the change of radioactivity through seasonal changes.

From summary: "The relative absorptions of X-rays by various substances are listed as a guide to the application of the X-ray photometric method in chemical analysis and to the estimation of interference by extraneous substances."

This report follows an investigation of a cargo truck found contaminated by various radioactive material on a routine trip from Arco, Idaho to the Hanford plant on May 8, 1952. The report analyzes the truck's route in an attempt to find the location of the contaminating region.

Report evaluating different methods of preparing nitric acid solution and different methods of separating plutonium from this nitric acid solution of slag and crucible. Methods are explained and experimental data is given.

This report discusses the settling rates and properties of 101-U sludge when slurried with increasing amounts of synthetic supernatant.

Report discussing a study regarding iodine removal from dissolver solutions. Removal was traced by gamma activity in an iodine isotope which was added to the dissolver.

Report presenting a study for determining a way to remove iodine from dissolver solutions through sparging. DIssolver solutions were spiked with an iodine isotope that was used to track iodine removal through gamma activity.

Introduction:"A corrosion test program in support of the Redox Project was carried out during the second quarter of 1950 to determine the corrosion rates of several austenitic stainless steels in simulated 202-B Waste Storage solution containing HF, HN03, and H2SO4 acids. The results of this program are contained herein and all original data are recorded in laboratory notebook HW-3282-T."

Abstract: An investigation was conducted to determine the absorption and translocation of fission products by Russian thistle from a localized spot of contaminated soil. The amount and identity of the radioactive elements absorbed and translocated by the Russian thistle is given along with the location of these elements in the plants. Beta radioactivity to the amounts of 10 microcuries per gram caused no visible effects on the growth habits of sectioned material are included.

The following report examines a rapid method used to eliminate the possibility of explosive perchlorate-organic mixtures in a control laboratory in order to determine radiocesium. These methods include the usage of chloroplatinic acid as a precipitate of radocesium.

Report discussing a study regarding the identification and property analysis of plutonium (IV) monobutyl phosphate, which formed as a white precipitate in another study of the effects of monobutyl phosphate on plutonium(IV) in tributyl phosphate extractions.

Report reviewing a study regarding the chemical properties, appearance, texture, homogeneity and slurrying ability of waste metal sludge. The settling rates of sludge-supernatant slurries is also discussed.

Report discussing a study of various types of mercuric salts in order to determine which salt prevents the evolution of iodine which results from sparging.

Report discussing changes in parameters regarding Sutton's diffusion hypothesis, which is used in calculations of plant stacks' atmospheric pollutant distribution. An explanation of the computation and results are given.

The following report covers a test with the objective to demonstrate that the plutonium and uranium losses associated with the aluminum jacket dissolution could be reduced by substituting a water wash for the 5 per cent nitric acid wash following the coating removal and that this change would not adversely effect the product yield of decontamination in subsequent process steps.

Introduction: "Evidence of masonite deterioration in test hole plugs was interpreted to mean that a previous estimate of the minimum lifetime of the masonite in a Hanford biological shield might be somewhat optimistic. The importance of understanding the effects of radiations on masonite for both present and future pile shields dictated that masonite be sampled from an operating pile shield and studied. The results and techniques are discussed in the following sections of this report."

The results of electrical resistance measurements have been used as a means of following changes occurring in metals due to irradiation. The electrical conductivity is sensitive to changes in composition and to cold-work or structure damage. In an anisotropic metal, such as uranium, the director of measurement also influences to some extent the values obtained. For these reasons it is essential to use the same material, and if possible the same piece of material, in comparing the electrical properties before and after irradiation. This report is a description of the measurements made on pieces of the same uranium rod before and after an exposure of approximately 150 MWD/T. The results, while preliminary in nature and dealing only with one sample and exposure level, provide data for which a comparison may be made of the electrical resistivity of irradiated and non-irradiated uranium metal.

For some time, the need has been recognized for an X-ray diffraction unit applicable to studies concerning the crystallographic characteristics of pile irradiated materials. Except for studies involving specimens of low activity, it has been impossible in the past to investigate materials which emit intense beta and gamma radiations. The exact type and degree of irradiation damage to high activity materials has been largely a matter of theoretical conjecture. The object of this report is to describe an X-ray diffraction spectrometer that can be used to collect crystallographic data from irradiated materials.

When an aqueous solution containing dissolved irradiated uranium and nitric acid is equilibrated with 30% tributylphosphate solution in kerosene, the distribution co-efficients for sirconium and niobium are decreased by the addition of phosphoric acid to the system.

Three types of stainless steel (309 SCB, Carpenter 20, 304-L) were exposed to both the liquid and vapor phase of each of three types of solutions. The time of exposure totaled ten days during which the specimens were cleaned and weighed periodically. The three synthetic D-12 waste solutions contained respectively chrome-high chloride, chrome-low chloride and high chloride sans chromium. The solutions were renewed at each weighing.

The first of two general methods are discussed based on the removal of the thin layer of aluminum to which graphite adheres. Two electro-polishing techniques, an electrolytic etch, an anodization-deanodication cycle and two chemical etches are described.