"The purpose of the present work is to extend the previous investigation and to derive additional airfoil sections designed to minimize the undesirable characteristics of the previously tested airfoils. The tests of these additional airfoils were made in the Langley two-dimensional low-turbulence tunnel (LTT)" (p. 2).

From Introduction: "Fatigue life expectancy in normal transport operations was investigated in reference 1 and was found to be of equal importance with single-gust life. The effect of overload operation of transport airplanes on the probability of encountering single critical gusts was investigated in reference 2 and the frequency of critical gusts was found to increase rapidly with overload. The effect of overload operation on fatigue strength, however, has not heretofore been evaluated, hence the investigations of references 1 and 2 are combined herein to permit such evaluation and to determine the relative importance of fatigue and single-gust failures under conditions of overload operation."

Report discusses the results of testing "to determine the relationship between impact normal acceleration and flight-path angle for seaplanes landing in smooth water" (from Summary). The tests were done at high and low forward speeds and trims at 6 degrees and 9 degrees, a 22.5 degree angle of dead rise, and a gross weight of 1100 pounds. Information about the forces acting on the aircraft and maximum depth of immersion and trim is provided.

Report discusses the results of testing "to determine the relationship between impact normal acceleration and flight-path angle for seaplanes landing on smooth water" (from Summary). The tests were performed at 12 degrees trim, 22.5 degree angle of dead rise, and a total weight of 1100 pounds. The effect on the maximum impact normal acceleration and the effects of immersion on acceleration are described.

"Tests were made in high-speed dives and pull-outs to determine, by combined radar-optical tracking equipment, the static-pressure error of an airspeed-head installation on a P-51B airplane." The equipment used and testing procedure are described. The variation of static-pressure error is provided for several ranges of airplane lift coefficient.

"In order to determine the lead susceptibility of several fuels, leaded and unleaded fuels from the same stock were blended and tested in a full-scale air-cooled aircraft-engine cylinder. The fuels were S-4 reference fuel, virgin-base stock, aviation alkylate, neohexane, and blends of 25-percent benzene with 75-percent virgin-base stock and 25-percent toluene with 75-percent virgin-base stock" (p. 1).