The purpose of this study was to compare industrial arts and non-industrial arts students in Midland High School, Midland, Texas. Data were gathered and analyzed to compare industrial arts and non-industrial arts students' chronological ages, family background, I. Q, scores and percentile rankings from intelligence tests, final grade point averages, vocational interests as described by the Kuder Occupational Interest Survey, vocational and educational ambitions, hobby interests, and reasons for election or non-election of industrial arts.

The purpose of the study was to identify the types and amount of industrial and diversified work experience acquired by the industrial arts teachers in the Dallas Independent School District and their opinions concerning the value of industrial experience to industrial arts teaching.

This study is an investigation of the baccalaureate degree requirements in industrial arts education and industrial technology education with special emphasis on the similarities and differences between the two curriculums. The criteria used as a basis for comparison are (1) clarification of terminology, (2) historical trends in the development of the present programs, (3) basic program philosophies, (4) curriculum content, (5) objectives sought by each curriculum, (6) number of graduates from each program, and (7) employment of the graduates.

The purpose of this study was threefold: (1) to determine what the curriculum offerings were in Texas high schools for General Metalworking I and II during the 1970-71 school year, (2) to determine whether these individual course offerings agreed with the state prescribed curriculum as set forth by the Texas Education Agency, and (3) to determine in what ways the course offerings of the individual schools differed from the state prescribed curriculum.

The problem of this study was to determine whether or not technical education has grown and developed in Nigeria and to identify problems affecting its growth.

This study involved an evaluation of basic electricity project-construction ideas to determine their suitability for classroom use in achieving the objectives of industrial arts.

The purpose of this study is threefold: (1) to identify and compile recommended safety standards for woodworking laboratories concerning guarding of machines, electrical wiring, fire prevention, flooring materials, and aisles; (2) to identify the standards that pertain to the physical facility and equipment used in industrial arts laboratories and to make them available to teachers and administrators for use in renovation of existing facilities and planning new ones; and (3) to determine the extent to which industrial arts woodworking laboratories in Texas high schools are in compliance with the safety standards set forth by the Texas Occupational Safety Board.

The problem of this study was to determine the suitability of the available industrial arts textbooks for classroom use in the subject areas of general drafting and architectural drafting.

The problem with which this study was concerned was that of developing wood stain formulas from a small supply of materials. These formulas should produce a wide variety of colors from which to select, the use of which should be suited to the school or home laboratory.

This study was conducted to determine the methods used in the purchasing, storing, budgeting, accounting, distributing, and inventorying of woodworking materials by industrial arts instructors in secondary schools in the state of Texas.

The problem of this study is to provide a descriptive analysis of research in career-oriented education and a plan of procedure to implement it in the Dallas Independent School District. The first part presents the inception of the career education program, the concept and components of career education, and the scope and goals of career education. The second part division discusses career education precursors and overviews of selected existing programs. The final portion of the study deals with implications of implementation of career education in the Dallas Independent School District.

"The problem with which this study is concerned is that of determining whether the implementation of a teacher-training curriculum providing the courses required for state certification of vocational-technical teachers employed in the North Texas public school systems is feasible and desirable at North Texas State University."--1.

The problem of this study was to develop a set of workable guidelines that could be implemented in the development of an industrial arts program for the superior high school student.

This study was conducted to ascertain whether or not the opportunities for developing competencies in descriptive geometry needed by draftsmen in the Dallas -Fort Worth area are being provided in Texas junior colleges. Findings concerning the knowledge, skills, and equipment associated with descriptive geometry as it is presented in Texas junior colleges were compared with competencies in descriptive geometry that representatives of industry believe are important for successful draftsmen in companies in the Dallas-Fort Worth area. The purpose of the study is to compile information which will be of use to school officials and teachers in developing courses of study that will enable students to acquire the knowledge and skills needed for success in industry.

The problem was to determine the effectiveness of using polyethylene glycol 1000 in the treatment of green wood for the purpose of forming projects made of wood veneer and of simple design for use in junior high or high school woodworking classes. The purpose of this study was to seek answers to the following questions. 1. Is polyethylene glycol 1000 an effective stabilizing agent for green wood veneer that can be used in school woodworking classes? 2. Can green wood veneer treated with polyethylene glycol 1000 be bent to form simple woodwork projects? 3. Can green wood veneer treated with polyethylene glycol 1000 be successfully used in junior high and high school woodworking classes? 4. What length of treatment time is best for green wood veneer that is to be used to form simple bent wood projects? 5. Is one-fourth inch thickness suitable for green wood veneer that is to be treated with polyethylene glycol 1000 and used to form simple bent wood projects?

The problem of this study is to determine a profile of the typical industrial arts major at North Texas State University, based on scores made on the American College Testing Program Battery, and to compare this profile with profiles of four other local subgroups. ACT scores representing nine categories of student information were analyzed from a total sampling of 286 North Texas State University students of the Industrial Arts Department, School of Business Administration, School of Education, and College of Arts and Sciences. Data were from tests administered during regular ACT testing sessions in 1966-67.

This study surveyed teachers of industrial plastics and personnel of the plastics industry to evaluate an industrial-plastics curriculum guide. The respondents felt that there was no unnecessary material in the guide, that additional information should be added to several of the plastics processes in the curriculum guide, and that most of the subject areas in the guide should be studied for no less than an hour and no more than five hours.

This is a study of the drafting curriculum in the Fort Worth public high schools, Fort Worth, Texas.The specific purposes or the study were as follows: 1. To review and compare the courses and content of the drafting curriculums listed in the bulletins of the TEA and the Fort Worth Public Schools. 2. To study drafting scheduling procedures in each of the Fort Worth public high schools. 3. To study the courses and contents of the drafting curriculums offered in each of the Fort Worth public high schools. 4. To determine if there are variations from school to school in curriculum content of the drafting courses in each of the Fort Worth public high schools. 5. To offer suggestions and recommendations for improving the program, if weaknesses were evident, when the program was evaluated by acceptable criteria (12, 13, and 14).

The primary purpose of this study was to identify the skills and knowledge required of employees in the plastics industry in the Dallas Metropolitan area. An instrument was utilized to obtain data in order to identify various skills and knowledge. This study was limited to fifteen instruments returned by fifteen participating firms in the Dallas Metropolitan area. A comparison was made of the industrial arts plastics course offerings in the Dallas Metropolitan area schools with the requirements of the plastic industry in order to ascertain the degree of importance the course offerings were to the plastics industry.

"This study was conducted to collect and analyze data relative to the employment status of industrial arts graduates."--1.

"This study was conducted to find the extent to which girls are involved in industrial arts classes and related activities in Texas public schools, the factors which limit their enrollment, and teachers' opinions concerning industrial arts experiences most beneficial for girls. Data were obtained from bulletins, books, magazines, related studies, and from information forms completed by 123 industrial arts teachers....Among the more important findings were: 1. Girls tend to enroll in certain areas of industrial arts with little or no participation in other areas. 2. A large majority of the respondents indicated they would be receptive to teaching industrial arts to girls. 3. The respondents indicated industrial arts would be of great value to girls. 4. The optimum number of industrial arts credits for girls is one or two. 5. Girls should be taught in mixed classes. 6. The realization of the states objectives of industrial arts is of equal value to boys and girls. 7. Many girls have negative feelings toward becoming involved in industrial arts. 8. Exchange units and unified arts programs are of value to girls and boys." --p. 2

The purpose of this study was to determine the required knowledge and skills of mobile home metalworkers in the Dallas-Fort Worth area as compared to the Industrial Arts metalworking curriculum presented in Texas Education Agency, Bulletin 615. Items of significance in Chapter IV appear in findings, conclusions, and recommendations. The "use of basic hand tools" and "safety concepts" were consistently emphasized and required by manufacturing firms. It was found that educational requirements were quite often "some high school" or less. It was found that Industrial Arts metalworking curriculum was closely related to required knowledge and skills of mobile home metalworkers. It was recommended that Industrial Arts course work be extended into lower levels of education.

This study was made to determine the advantages of the use of epoxy resins in the industrial arts laboratory. The purpose of this study was to determine the feasibility of using epoxy resins as a wood adhesive. Data was gathered from texts, periodicals, and unpublished data. Tests were conducted using epoxy samples acquired from three epoxy manufacturers on three different woods and joints. The study discusses the advantages and disadvantages of using epoxy resins as a wood adhesive and the material and equipment necessary for the use of epoxy resins. Strength tests were performed on the joints adhered with epoxy and on joints adhered with white glue. A hand operated high tensile strength machine was used to conduct the tests. Epoxy Resins were found, in most cases, to give a more durable bond than white glue. Further studies should be made using epoxy resins as adhesives for metal, glass, plastic, and other materials used in the industrial arts laboratory.

This study measures technical preparation and job demands among North Texas State University industrial arts graduates teaching in high schools. In addition to data from professional literature and the NTSU Bulletin, questionnaire mailings reveal that most graduates consider themselves qualified although recommending more semester hours of industrial arts for certification. They also affirm the practical value to the teacher of experience in industry. The study recommends narrowing the number of areas in industrial arts preparation and providing a more specialized teacher-training program with greater uniformity of semester hours.