A report regarding proceedings of the nuclear superheat meeting no. 6, held March 7, 8 and 9, 1962, in Windsor, Connecticut.

Report describing a study which analyzed thermal characteristics of Type 3 elements planned for installation in the SM-1, SM-1A and PM-2A plants, for both steady state and loss of flow transient conditions. Results of this analysis for steady state conditions indicate that the SM-1, SM-1A and PM-2A Type 3 cores will operate safely at design and scram conditions.

Abstract: This preliminary technical report covers design of the SM Type 3 element, its use .in.. SM-1 Core III, and planned use in the Type 3 Core for PM-2A. The Type:3 element characteristics are compared with Type 1 (SM-1 Core I) element nuclear, metallurgical, thermal and hydraulic characteristics and fabrication. The effect of using the Type 3 element in SM-1 Core III and. its planned use in a Type 3 Core for PM-2A is discussed with regard to operation, shielding, reactor safety and all conceivable special problems.

Abstract: This technical report covers the zero power experiments performed on PM-2A Core II at the Alco Critical Facility. PM-2A Core II is the first replacement core for a portable pressurized reactor at Camp Century, Greenland. Core II is the same as Core I with the exception that Core II has an increased burnable poison (B-10) content. The zero power experiment consisted of fuel element uniformity test; core assembly test, development of an on-site loading procedure and an analysis of experimental data. Physical characteristics determined include distribution of fuel and B-10 in the fuel plates, minimum critical mass, control rod bank calibration, and integral rod worth. The report concludes with an analysis of the experimental data including estimated uniform and non-uniform burnup rates.

Abstract: This technical report contains a comprehensive analysis of the nuclear characteristics of the SM-1 Core I. Comparison of analytical and experimental results for neutron ages and core reactivities of a variety of cases investigated shows that the MUFT III with P-1 slowing down approximation gives the best results. At startup the core reactivity and rod bank worth under various operating conditions are investigated and compared to experiment. Core lifetime was calculated to be 16.8 MWYR compared to 16.4 MWYR experimental. The temperature coefficient has been calculated and compared to experiment as function of burnup. In Appendix A, flux distribution, temperature coefficient, effective delayed neutron fraction and core life are analyzed by Dr. R. L. Murray by one and two group modified theory series expansion calculations.