Amine nitrogen inversion, difficult to observe in aqueous solution, is followed in a chiral, supramolecular host molecule with purely-rotational T-symmetry that reduces the local symmetry of encapsulated monoprotonated diamines and enables the observation and quantification of {Delta}G{double_dagger} for the combined hydrogen-bond breaking and nitrogen inversion rotation (NIR) process. Free energies of activation for the combined hydrogen-bond breaking and NIR process inside of the chiral assembly were determined by the NMR coalescence method. Activation parameters for ejection of the protonated amines from the assembly confirm that the NIR process responsible for the coalescence behavior occurs inside of the assembly rather than by a guest ejection/NIR/re-encapsulation mechanism. For one of the diamines, N,N,N{prime},N{prime}-tetramethylethylenediamine (TMEDA), the relative energy barriers for the hydrogen-bond breaking and NIR process were calculated at the G3(MP2)//B3LYP/6-31++G(d,p) level of theory, and these agreed well with the experimental data.

The electrochemical performance of LiFePO4/C composites in lithium cells is closely correlated to pressed pellet conductivities measured by AC impedance methods. These composite conductivities are a strong function not only of the amount of carbon but of its structure and distribution. Ideally, the amount of carbon in composites should be minimal (less than about 2 wtpercent) so as not to decrease the energy density unduly. This is particularly important for plug-in hybrid electric vehicle applications (PHEVs) where both high power and moderate energy density are required. Optimization of the carbon structure, particularly the sp2/sp3 and disordered/graphene (D/G) ratios, improves the electronic conductivity while minimizing the carbon amount. Manipulation of the carbon structure can be achieved via the use of synthetic additives including ironcontaining graphitization catalysts. Additionally, combustion synthesis techniques allow co-synthesis of LiFePO4 and carbon fibers or nanotubes, which can act as"nanowires" for the conduction of current during cell operation.

The definition of what makes an article interesting varies from user to user and continually evolves even for a single user. As a result, for news recommendation systems, useless document features can not be determined a priori and all features are usually considered for interestingness classification. Consequently, the presence of currently useless features degrades classification performance [1], particularly over the initial set of news articles being classified. The initial set of document is critical for a user when considering which particular news recommendation system to adopt. To address these problems, we introduce an improved version of the naive Bayes classifier with online feature selection. We use correlation to determine the utility of each feature and take advantage of the conditional independence assumption used by naive Bayes for online feature selection and classification. The augmented naive Bayes classifier performs 28% better than the traditional naive Bayes classifier in recommending news articles from the Yahoo! RSS feeds.

New corrosion-resistant, iron-based amorphous metals have been identified from published data or developed through combinatorial synthesis, and tested to determine their relative corrosion resistance. Many of these materials can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS No. N06022) in some very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. Two Fe-based amorphous metal formulations have been found that appear to have corrosion resistance comparable to, or better than that of Ni-based Alloy C-22, based on breakdown potential and corrosion rate. Both Cr and Mo provide corrosion resistance, B enables glass formation, and Y lowers critical cooling rate (CCR). SAM1651 has yttrium added, and has a nominal critical cooling rate of only 80 Kelvin per second, while SAM2X7 (similar to SAM2X5) has no yttrium, and a relatively high critical cooling rate of 610 Kelvin per second. Both amorphous metal formulations have strengths and weaknesses. SAM1651 (yttrium added) has a low critical cooling rate (CCR), which enables it to be rendered as a completely amorphous thermal spray coating. Unfortunately, it is relatively difficult to atomize, with powders being irregular in shape. This causes the powder to be …

The multi-institutional High Performance Corrosion Resistant Materials (HPCRM) Team is cosponsored by the Defense Advanced Projects Agency (DARPA) Defense Science Office (DSO) and the Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM), and has developed new corrosion-resistant, iron-based amorphous metals that can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS No. N06022) in very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. Corrosion costs the Department of Defense billions of dollars every year, with an immense quantity of material in various structures undergoing corrosion. For example, in addition to fluid and seawater piping, ballast tanks, and propulsions systems, approximately 345 million square feet of structure aboard naval ships and crafts require costly corrosion control measures. The use of advanced corrosion-resistant materials to prevent the continuous degradation of this massive surface area would be extremely beneficial. The Fe-based corrosion-resistant, amorphous-metal coatings under development may prove of importance for applications on ships. Such coatings could be used as an 'integral drip shield' on spent fuel containers, as well as protective coatings that could be applied over welds, thereby preventing exposure to environments that might cause …

The topography, geology, hydrology, vegetation, and wildlife of the Oak Ridge Reservation (ORR) provide a complex and intricate array of resources that directly impact land stewardship and use decisions (Fig. 1). The purpose of this document is to consolidate general information regarding the natural resources and physical characteristics of the ORR. The ORR, encompassing 33,114 acres (13,401 ha) of federally owned land and three Department of Energy (DOE) installations, is located in Roane and Anderson Counties in east Tennessee, mostly within the corporate limits of the city of Oak Ridge and southwest of the population center of Oak Ridge. The ORR is bordered on the north and east by the population center of the city of Oak Ridge and on the south and west by the Clinch River/Melton Hill Lake impoundment. All areas of the ORR are relatively pristine when compared with the surrounding region, especially in the Valley and Ridge Physiographic Province (Fig. 2). From the air, the ORR is clearly a large and nearly continuous island of forest within a landscape that is fragmented by urban development and agriculture. Satellite imagery from 2006 was used to develop a land-use/land-cover cover map of the ORR and surrounding lands (Fig. …

A carbon credit market is developing in the United States. Information is needed by buyers and sellers of carbon credits so that the market functions equitably and efficiently. Analyses have been conducted to determine the optimal forest management regime to employ for each of the major commercial tree species so that profitability of timber production only or the combination of timber production and carbon sequestration is maximized. Because the potential of a forest ecosystem to sequester carbon depends on the tree species, site quality and management regimes utilized, analyses have determined how to optimize carbon sequestration by determining how to optimally manage each species, given a range of site qualities, discount rates, prices of carbon credits and other economic variables. The effects of a carbon credit market on the method and profitability of forest management, the cost of sequestering carbon, the amount of carbon that can be sequestered, and the amount of timber products produced has been determined.

The Hanford Seismic Assessment Program (HSAP) provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network for the U.S. Department of Energy and its contractors. The Hanford Seismic Assessment Team locates and identifies sources of seismic activity and monitors changes in the historical pattern of seismic activity at the Hanford Site. The data are compiled, archived, and published for use by the Hanford Site for waste management, Natural Phenomena Hazards assessments, and engineering design and construction. In addition, the seismic monitoring organization works with the Hanford Site Emergency Services Organization to provide assistance in the event of a significant earthquake on the Hanford Site. The Hanford Seismic Network and the Eastern Washington Regional Network consist of 41 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Assessment Team. For the Hanford Seismic Network, 16 local earthquakes were recorded during the third quarter of fiscal year 2007. The largest event (magnitude 2.0) occurred on April 16, 2007 and was located 4 km southwest of the 400 Area in the Columbia River basalts at a depth of approximately 3 km. Stratigraphically, 7 earthquakes occurred in the Columbia River basalts (approximately 0-5 km …

In this work we present a NIDS cluster as a scalable solution for realizing high-performance, stateful network intrusion detection on commodity hardware. The design addresses three challenges: (i) distributing traffic evenly across an extensible set of analysis nodes in a fashion that minimizes the communication required for coordination, (ii) adapting the NIDS's operation to support coordinating its low-level analysis rather than just aggregating alerts; and (iii) validating that the cluster produces sound results. Prototypes of our NIDS cluster now operate at the Lawrence Berkeley National Laboratory and the University of California at Berkeley. In both environments the clusters greatly enhance the power of the network security monitoring.

The thesis of this extended abstract is simple. High productivity comes from high level infrastructures. To measure this, we introduce a methodology that goes beyond the tradition of timing software in serial and tuned parallel modes. We perform a classroom productivity study involving 29 students who have written a homework exercise in a low level language (MPI message passing) and a high level language (Star-P with MATLAB client). Our conclusions indicate what perhaps should be of little surprise: (1) the high level language is always far easier on the students than the low level language. (2) The early versions of the high level language perform inadequately compared to the tuned low level language, but later versions substantially catch up. Asymptotically, the analogy must hold that message passing is to high level language parallel programming as assembler is to high level environments such as MATLAB, Mathematica, Maple, or even Python. We follow the Kepner method that correctly realizes that traditional speedup numbers without some discussion of the human cost of reaching these numbers can fail to reflect the true human productivity cost of high performance computing. Traditional data compares low level message passing with serial computation. With the benefit of a …

The branching fractions for the decays B {yields} P{ell}{nu}{sub {ell}}, where P are the pseudoscalar charmless mesons {pi}{sup {+-}}, {pi}{sup 0}, {eta} and {eta}{prime} and {ell} is an electron or muon, are measured with B{sup 0} and B{sup {+-}} mesons found in the recoil of a second B meson decaying as B {yields} D{ell}{nu}{sub {ell}} or B {yields} D*{ell}{nu}{sub {ell}}. The measurements are based on a data set of 348 fb{sup -1} of e{sup +}e{sup -} collisions at {radical}s = 10.58 GeV recorded with the BABAR detector. Assuming isospin symmetry, measured pionic branching fractions are combined into {Beta}(B{sup 0} {yields} {pi}{sup -}{ell}{sup +}{nu}{sub {ell}}) = (1.54 {+-} 0.17{sub (stat)} {+-} 0.09{sub (syst)}) x 10{sup -4}. First evidence of the B{sup +} {yields} {eta}{ell}{sup +}{nu}{sub {ell}} decay is seen; its branching fraction is measured to be {Beta}(B{sup +} {yields} {eta}{ell}{sup +}{nu}{sub {ell}}) = (0.64 {+-} 0.20{sub (stat)} {+-} 0.03{sub (syst)}) x 10{sup -4}. It is determined that {Beta}(B{sup +} {yields} {eta}{prime}{ell}{sup +}{nu}{sub {ell}}) < 0.47 x 10{sup -4} to 90% confidence. Partial branching fractions for the pionic decays in ranges of the momentum transfer and various published calculations of the B {yields} {pi} hadronic form factor are used to obtain values …

An investigation was done to determine the maximum credible event value for samples of explosives and disassembled components up to 1.2 g when stored in conductive plastic vials as packaged and handled, stored, or transported at Mound. The test was performed at Test Firing, with photographs taken before and after the test. The standard propagation test setup was used; a vial containing 1.2 g of PETN (pentaerythritol tetranitrate) was surrounded by other like vials containing 1.2-g samples of PETN. The 1.2-g PETN pellet was then ignited by an EX-12 detonator. The test showed that there was no propagation and that the maximum credible event value for the handling tray is 1.2 g. The test also showed that when the tray is placed in a metal container the MCE value will still be 1.2 g. 9 figs.

The force-frequency effect in quartz resonators has in the past been utilized as a transducer mechanism in various realizations and, in particular, successfully commercialized as a pressure transducer. More recently the need for a very precise (0.01 psi pressure uncertainty at 10,000 psi) pressure transducer to operate at high temperatures (275 to 300/sup 0/C) in geothermal environments has necessitated further development efforts directed to improve performance. The incorporation of the rotated X-cut into a pressure transducer, similar to the Hewlett-Packard design, represents one such development effort at Sandia National Laboratories. The present report characterizes the pressure-temperature performance of the AT- and rotated X-cut resonators and the Hewlett-Packard sensor where the experimental data in the pressure temperature domain are available.

Coatings for laser fusion targets have been deposited in an inductively coupled discharge device by plasma polymerization. Two feed gases were used: perfluoro-2-butene, which produced a fluorocarbon coating (CF/sub 1/ /sub 3/) with a density of 1.8 g/cc, and trans-2-butene which produced a hydrocarbon coating (CH/sub 1/ /sub 3/) with a density of 1.0 g/cc. Uniform pin-hole free films have been deposited to a thickness of up to 30 ..mu..m of fluorocarbon and up to 110 ..mu..m of hydrocarbon. The effect of process variables on surface smoothness has been investigated. The basic defect in the coating has been found to result from shadowing by a small surface irregularity in an anisotropic coating flux.

The flowsheet proposed by KAPL for the treatment of alkaline nitrate radiochemical processing waste has been modified to include an ion-exchange step for the decontamination of cesium, strontium, and other cationic fission products. In laboratory studies of the electrolysis steps in a nitrate reduction cell, synthetic alkaline waste, 0.55 to 4.83 M total electrolyte, was decontaminated from ruthenium by factors of > 210. The nitrate of 3.0 M waste was reduced to ammonia with current efficiencies of 100%. Power consumption was 4.7 kwh/lb of nitrate reduced. Significant factors affecting the rate of ruthenium decontamination were temperature, cathode area, cathode current density, and electrolyte concentration. Those affecting nitrate reduction current efficiencies were the cathode current density, electrolyte concentration, and stirring rate. In an acid-base membrane cell, reusable nitric acid as well as sodium hydroxide was regenerated. However, such a cell is less economical to construct and operate than the nitrate reduction cell. At least 5 kwh of power is required to transfer 1 lb of nitrate from ORNL type waste. In addition, the greater complexity of the acid-base cell makes it less adaptable for remote control.

This note discusses the possibility of magnetically accelerating the plasma rings. At low-to-moderate ring kinetic energy, application to heating, fueling, and efficient current drive of conventional fusion reactors appears possible. At high ring kinetic energy, applications to inertial-confinement fusion through pellet heating and to transuranic element synthesis appear possible. The rings may be considered to be a self-linking flux bundle having net helicity. From an accelerator point of view, the rings represent collective particle entities held together by magnetic forces and may be viewed as macroparticles or micropellets having large magnetic moment per unit mass. Because of the relatively long lifetime and resiliency of the rings, it appears possible to accelerate to multimegajoule kinetic energy over reasonable distances and to focus the rings to centimeter-size dimensions.

The present work is an outgrowth of studies made in support of CRBR licensing, but the conclusions drawn should be generally applicable to oxide-fueled LMFBR's. The accident under consideration is a 10 cents/s unprotected TOP (transient overpower), for which a series of PLUTO2/SAS4A calculations has been performed using a higher power CRBR EOC3 fuel pin which had 275 days irradiation. The assumption was made in the licensing work that a short pin failure will occur at the axial midplane, maximizing the positive fuel motion reactivity effect, as it was felt that a less conservative assumption could not be conclusively justified. This assumption is also made in the present case.

The analysis encompassed identification and analysis of potential threats to canister integrity arising in the course of waste solidification, interim storage at the fuels reprocessing plant, wet and dry shipment, and geologic storage. Fabrication techniques and quality assurance requirements necessary to insure optimum canister reliability were considered taking into account such factors as welding procedure, surface preparation, stress relief, remote weld closure, and inspection methods. Alternative canister materials and canister systems were also considered in terms of optimum reliability in the face of threats to the canister's integrity, ease of fabrication, inspection, handling and cost. If interim storage in air is admissible, the sequence suggested comprises producing a glass-type waste product in a continuous ceramic melter, pouring into a carbon steel or low-alloy steel canister of moderately heavy wall thickness, storing in air upright on a pad and surrounded by a concrete radiation shield, and thereafter placing in geologic storage without overpacking. Should the decision be to store in water during the interim period, then use of either a 304 L stainless steel canister overpacked with a solution-annealed and fast-cooled 304 L container, or a single high-alloy canister, is suggested. The high alloy may be Inconel 600, Incoloy Alloy 800, …

The radiological safety hazards of the experimental area (EA) for the proposed Inertial Confinement Fusion (ICF) Laboratory Microfusion Facility (LMF) have been examined. The EA includes those structures required to establish the proper pre-shot environment, point the beams, contain the pellet yield, and measure many different facets of the experiments. The radiation dose rates from neutron activation of representative target chamber materials, the laser beam tubes and the argon gas they contain, the air surrounding the chamber, and the concrete walls of the experimental area are given. Combining these results with the allowable dose rates for workers, we show how radiological considerations affect access to the inside of the target chamber and to the diagnostic platform area located outside the chamber. Waste disposal and tritium containment issues are summarized. Other neutronics issues, such as radiation damage to the final optics and neutron heating of materials placed close to the target, are also addressed. 16 refs., 2 figs., 1 tab.

This report covers the test methods and equipment for testing aircraft armor both hard and soft. The hard armor are the typical ceramic type while the soft armor are various types of layered composite materials. 10 figs. (JEF)

An evaluation of the methodology of the Resource Allocation's Model (RAM), developed to assist in developing an efficient research, development, and demonstration program for energy conserving technologies in the residential and commercial sectors, is presented. This evaluation begins by classifying the technologies according to the markets in which they will compete once they are commercialized. Within each market group, the probable costs of the new technologies are compared to the cost of the competitive conventional product. This information is used to calculate the expected energy savings of each portfolio of projects. Portfolios are then ranked in order of increasing energy savings, and estimates made of the value of various levels of funded research in each functional use area. Finally, successful portfolios in different market groups are compared in a similar manner in order to identify the most efficient comprehensive portfolio at each research funding level. Section 2 describes the original methodology and presents some of the modifications that were made during this task. Section 3 discusses the specific changes that were made, including improvements to the model as well as the development of more reliable data. The revised methodology is then applied to one market group to demonstrate its capabilities …

We are developing a two-dimensional, time-dependent computer code for the simulation of relativistic klystrons. We will discuss the main features of our code. We will also present an example simulation of a relativistic klystron with both a standing wave output cavity and a traveling wave output structure.

This monthly report details 100 Area technical activities of the Physics Group for the month of August 1949.

This report briefly describes the circumstances involving the accidental release of Iodine 131 into the atmosphere from the Purex Plant at Hanford in September, 1963.