Technical report: Measurements have been made on the equilibrium between Cu, Cu2+, U4+, and UO22+ in H2SO4 in an attempt to establish the value of the U4+ - UO22+ couple potential. The value of the formal potential for the U3+ - U4+ couple in 1N HCl at 0 degrees C was determined to be + 0.65 v.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Technical paper issued by the Bureau of Standards over studies conducted on transmissions of ultra-violet energy through different colored glasses. As stated in the introduction, "in the present paper are given the transmissions for the visible and ultra-violet of a large number of glasses, mostly colored, which are not used primarily for eye protection, but which are useful for various other purposes" (p. 3). This paper includes illustrations, and photographs.

Data has been previously presented to show that aluminum corrosion in high temperature water may proceed with either a parabolic or a linear dependence on time. The rate of the parabolic process is an Arrhenius function of temperature and essentially independent of alloy composition. More recently several aluminum melts have been tested which corrode by a logarithmic rate process.

The tendency for Austenitic Stainless Steels to develop cracks may be considered to be a function of several variables. Chemical composition of the electrode and base metal, are variables which have been reported to greatly influence the final behavior of the weld. Two types of electrodes, Type 308L and Type 347, were compared with respect to their respective crack sensitivities. Also, comparative results were desired between the 308L-15 (DC) and 308L-15 (AC-DC) type electrodes. At present, no standard test has been designed that will yield quantitative results as to the crack-resistant properties of a weld. With this in mind, the "Arcos Segmented Circular-Groove Notch Sensitivity Test" was chosen as the test to be used, since other investigations have employed the test and some comparison of results could be made.

The friction characteristics of a full-scale straight-tube model of the ART fuel-to-NaK heat exchanger were determined experimentally. The presence of the spacers resulted in a transition to semi-turbulent flow at a Reynolds modulus of 350. this semi-turbulent flow persisted up to a Reynolds modulus of 5,000. The circumferential spacers were found to contribute slightly more than the radial spacers to the pressure loss in the heat exchanger.