Serial/Series Title
Atomic Energy Commission Reports
24
NACA Research Memorandums
16
AEC research and development report
6
GJBX
6
Hanford Works Reports
6
United States Department of Energy Grand Junction Office Reports
6
North American Aviation Reports
5
Report (U.S. Atomic Energy Commission)
5
HW (Series)
4
NACA Technical Reports
3
29 More
62 Matching Results
Results open in a new window/tab.
Results:
1 - 24 of
62
next
Progress Report on Refining of MgX and Other Uranium-Bearing Materials
Abstract: "The effects of acidity on extraction of vanadium and molybdenum by diethyl ether are described. Solubility data for several vanadium compounds in nitrate process solutions are presented. Preliminary results on the extraction of uranium from process slurries by tributyl phosphate are reported, including data on the contaminants extracted with the uranium."
Date:
November 15, 1950
Creator:
Ewing, R. A.; Belcher, R. L.; Kiehl, S. J., Jr. & Bearse, A. E.
Object Type:
Report
System:
The UNT Digital Library
Topical Report on Chemical Process to Recover Uranium from Phosphate Rock
The following report summarizes research done on dissolving uranium from phosphate rock and superphosphate and recovering it from solution in a more concentrated form.
Date:
November 15, 1947
Creator:
Igelsrud, Iver
Object Type:
Report
System:
The UNT Digital Library
The Anatomy of Plasmons
From abstract: "Plamons (plasma-magnetic entities) are toroidal "packages" of plasma wrapped up in their own magnetic field. Experimental evidence for the existence of plasmons is adduced and theoretical considerations concerning their various types and their stability are discussed."
Date:
November 15, 1955
Creator:
Bostick, W. H.
Object Type:
Report
System:
The UNT Digital Library
A Remotely Controlled Welding Device for Joining Stainless Steel Tubes
Abstract: The design and testing of experimental equipment for remotely joining stainless steel tubing by heliarc welding is described. This apparatus consists of a modified heliarc welding torch which is hydraulically controlled to maintain constant arc voltage. A suitable arc voltage sensing and control amplifier circuit was developed for this application.
Date:
November 15, 1954
Creator:
Mueller, Martin & Hecker, Eugene
Object Type:
Report
System:
The UNT Digital Library
Hot-Pressure Bonding of OMR Fuel Plates
Abstract: An alluminum-clad low-enrichment, uranium-alloy fuel element of flat plate configuration has been proposed for the Organic Moderated Reactor (OMR).
Date:
November 15, 1959
Creator:
Alm, G. V.; Binstock, M. H. & Garrett, E. E.
Object Type:
Report
System:
The UNT Digital Library
Terminal Status Report for the Processing Refabrication Experiment
Introduction: A low-capacity, low-decontamination plant can be built, as part of a power reactor complex, to avoid long distance transfer of fuel to a high-capacity aqueous processing plant. Activation of such a complex, with the processing plant adjacent to the reactor it serves, could decrease the cost of the integrated fuel cycle. The study of this concept is a major objective of the Processing Refabrication Experiment (PRE).
Date:
November 15, 1959
Creator:
Sinizer, D. I.; Mattern, K. L. & Kendall, E. G.
Object Type:
Report
System:
The UNT Digital Library
Hydrogeochemical and Stream Sediment Detailed Reconnaissance Survey for Trans-Pecos, Texas: Part 3. Sierra Vieja Survey Area
The following report provides results from a geochemical survey for Trans-Pecos, Texas. Field and laboratory data are presented for 29 groundwater and 240 stream sediment samples.
Date:
November 15, 1979
Creator:
Butz, T. R.; Payne, A. G.; Grimes, J. G.; Helgerson, R. N. & Bard, C. S.
Object Type:
Report
System:
The UNT Digital Library
Visual Efficiency of a Phosphor Bombarded by Plutonium Alpha Particles
This report follows and experiment that was performed to determine the visual efficiency of a phosphor when bombarded by alpha particles.
Date:
November 15, 1948
Creator:
Wakefield, Ernest
Object Type:
Report
System:
The UNT Digital Library
Graphical Aids in the Calculation of the Shielding Requirements for Spent U²³⁵ Fuel
Abstract: The data presented herein, in the form of graphs, can be used to obtain the value of this energy.
Date:
November 15, 1957
Creator:
Ashley, R. L.
Object Type:
Report
System:
The UNT Digital Library
Lateral-control investigation at transonic speeds of differentially deflected horizontal-tail surfaces for a configuration having a 6-percent-thick 45 degree sweptback wing
Report presenting an investigation in the 16-foot transonic tunnel to determine the lateral-control effectiveness of differentially deflected horizontal-tail surfaces mounted behind a 45 degree sweptback wing-fuselage combination. The effectiveness of the differentially deflected horizontal tail as a lateral-control device was found to be essentially independent of angle of attack and Mach number even in the transonic region. Results regarding the effects of differential deflection of horizontal-tail surfaces and effects of the vertical tail are provided.
Date:
November 15, 1955
Creator:
Critzos, Chris C.
Object Type:
Report
System:
The UNT Digital Library
A Transonic Wind-Tunnel Investigation of the Longitudinal Force and Moment Characteristics of a Plane and a Cambered 3-Percent-Thick Delta Wing of Aspect Ratio 3 on a Slender Body
Report presenting an investigation of the effects of leading-edge camber without twist on an aspect-ratio-3 delta wing of thickness ratio 3, a body with an ogive nose, and a cylindrical afterbody. Results regarding the base pressures and body characteristics and wing-body combinations are provided.
Date:
November 15, 1954
Creator:
Burrows, Dale L. & Palmer, William E.
Object Type:
Report
System:
The UNT Digital Library
Investigation of the Effect of Sweep on the Flutter of Cantilever Wings
Report presenting an experimental and analytical investigation of the flutter of uniform sweptback cantilever wings. The experiments used groups of wings sweptback by rotating and by shearing with angles of sweep ranging from 0 to 60 degrees. Results regarding the experimental investigation and a discussion and comparison of the analytical and experimental results are provided.
Date:
November 15, 1948
Creator:
Barmby, J. G.; Cunningham, H. J. & Garrick, I. E.
Object Type:
Report
System:
The UNT Digital Library
Stability and control characteristics of a free-flying model with an unswept wing of aspect ratio 3 (XS-3)
The results of power-off force tests and flight tests of a model with a thin unswept low-aspect-ratio wing are presented. The tests were made with the flaps retracted and deflected. The effects on the lateral flight characteristics of decreasing directional stability were noted.
Date:
November 15, 1948
Creator:
Bennett, Charles V. & Hassell, James L., Jr.
Object Type:
Report
System:
The UNT Digital Library
The Effect of an Operating Propeller on the Aerodynamic Characteristics at High Subsonic Speeds of a Model of a Vertical-Rising Airplane Having an Unswept Wing of Aspect Ratio 3
Report presenting an investigation in the pressure wind tunnel to determine the effect of an operating propeller on the aerodynamic characteristics of a model of a vertical-rising airplane with an unswept wing with an aspect ratio of 3. Lift, longitudinal force, pitch, and roll characteristics, with and without power, are presented for the complete model and various combinations of model components.
Date:
November 15, 1954
Creator:
Sutton, Fred B. & Buell, Donald A.
Object Type:
Report
System:
The UNT Digital Library
A Transonic Wing Investigation in the Langley 8-Foot High-Speed Tunnel at High Subsonic Mach Numbers and at a Mach Number of 1.2 : Wing-Fuselage Configuration Having a Wing of 35 Degrees Sweepback, Aspect Ratio 4, Taper Ratio 0.6, and NACA 65A006 Airfoil Section
Report presenting an investigation to determine the aerodynamic characteristics of a wing-fuselage configuration with a wing with quarter-chord line swept back 35 degrees, an aspect ratio of 4, a taper ratio of 0.6, and an NACA 65A006 airfoil section. Lift, drag, and pitching-moment characteristics, downwash angles, and wake characteristics for various angles of attack and Mach numbers are provided.
Date:
November 15, 1950
Creator:
Henry, Beverly Z., Jr.
Object Type:
Report
System:
The UNT Digital Library
Experimental investigation of a flat plate paddle jet vane operating on a rocket jet
Report presenting the results of static tests conducted for the purpose of determining the lift forces and hinge moments associated with a flat-plate paddle vane, externally hinged near a rocket-nozzle exit and operating on the jet for vane deflection angles ranging from -4 degrees to 25 degrees. Results regarding vane aerodynamic characteristics, performance of rocket motor, and vane erosion
Date:
November 15, 1950
Creator:
Bond, Aleck C.
Object Type:
Report
System:
The UNT Digital Library
Method of Matching Performance of Compressor Systems with that of Aircraft Power Sections
"A method is developed of easily determining the performance of a compressor system relative to that of the power section for a given altitude. Because compressors, reciprocating engines, and turbines are essentially flow devices, the performance of each of these power-plant components is presented in terms of similar dimensionless ratios. The pressure and temperature changes resulting from restrictions of the charge-air flow and from heat transfer in the ducts connecting the components of the power plant are also expressed by the same dimensionless ratios and the losses are included in the performance of the compressor" (p. 119).
Date:
November 15, 1945
Creator:
Bullock, Robert O.; Keetch, Robert C. & Moses, Jason J.
Object Type:
Report
System:
The UNT Digital Library
Wind-tunnel investigation at subsonic and supersonic speeds of a fighter model employing a low-aspect-ratio unswept wing and a horizontal tail mounted well above the wing plane - longitudinal stability and control
Report presenting experimental results showing the static longitudinal-stability and -control characteristics of a model of a fighter airplane with a low-aspect-ratio unswept wing and an all-movable horizontal tail. The investigation was made over a Mach number range from 0.60 to 0.90 and from 1.35 to 1.90. Results regarding the pitching moment at zero lift, longitudinal stability, and longitudinal control are provided.
Date:
November 15, 1954
Creator:
Smith, Willard G.
Object Type:
Report
System:
The UNT Digital Library
Performance and Boundary-Layer Data From 12 Degree and 23 Degree Conical Diffusers of Area Ratio 2.0 at Mach Numbers Up to Choking and Reynolds Numbers Up to 7.5 X 10(6)
"For each of two inlet-boundary-layer thicknesses, performance and boundary-layer characteristics have been determined for a 12 degree, 10-inch-inlet-diameter diffuser, a 12 degree, 21-inch-inlet-diameter diffuser, and a 23 degree, 21-inch-inlet-diameter diffuser. The investigation covered an inlet Mach number range from about 0.10 to coking. The corresponding inlet Reynolds number, based on inlet diameter, varied from about 0.5 x 10(6) to 7.5 x 10(6)" (p. 1013).
Date:
November 15, 1954
Creator:
Little, B. H., Jr. & Wilbur, Stafford W.
Object Type:
Report
System:
The UNT Digital Library
Longitudinal Stability Characteristics at Transonic Speeds of a Canard Configuration Having a 45 Degree Sweptback Wing of Aspect Ratio 6.0 and NACA 65A009 Airfoil Section
Report presenting an investigation to determine the longitudinal stability, lift, and drag characteristics of a rocket-powered model of a canard configuration with a 45 degree sweptback wing of aspect ratio 6.0, taper ratio of 0.6, and NACA 65A009 airfoil section. The variations with Mach number of lift, drag, and longitudinal stability were compared with a tailless and a conventional model with the same wing.
Date:
November 15, 1954
Creator:
Vitale, A. James & McFall, John C., Jr.
Object Type:
Report
System:
The UNT Digital Library
Full-scale performance study of a prototype crash-fire protection system for reciprocating-engine-powered airplanes
Report presenting an experimental airplane crash in order to study the performance of a prototype crash-fire inerting system for reciprocating-engine-powered airplanes. A fire did not occur during this crash, indicating that the crash-fire inerting system functioned satisfactorily as a complete unit. Further improvements in the crash-fire system are also provided.
Date:
November 15, 1955
Creator:
Black, Dugald O. & Moser, Jacob C.
Object Type:
Report
System:
The UNT Digital Library
Hydrogeochemical and Stream Sediment Reconnaissance Basic Data for Phoenix Quadrangle -- report is missing
Data collected as part of a hydrogeochemical and stream sediment reconnaissance in Phoenix, Arizona including laboratory data on waters and sediments as well as field data.
Date:
November 15, 1982
Creator:
Union Carbide Corporation. Nuclear Division.
Object Type:
Dataset
System:
The UNT Digital Library
Field Tests for the United States Atomic Energy Commission on the Use of the Seismic Geophysical Method for Tracing "Buried Channels" in the Monument Valley Area, Arizona
From introduction: This report contains the results of field tests for the U.S. AEC on the use of the seismic geophysical method for tracing "buried channels" in the Monument Valley area, Arizona.
Date:
November 15, 1952
Creator:
Wantland, Dart & Casey, Robert D.
Object Type:
Report
System:
The UNT Digital Library
Electroless Nickel Plating
Summary: "This investigation showed that a sound , weather-resistant coating can be applied to uranium that the surface to be plated is cleaned and etched properly. Using the proposed two-bath plating method at 80 C., a four-mil nickel coat can be deposited in thirteen hours."
Date:
November 15, 1950
Creator:
Groot, C. & Hopkins, H. H.
Object Type:
Report
System:
The UNT Digital Library